scholarly journals Development of an online monitoring method for electrostatic precipitators on commercial biomass combustion plants

2019 ◽  
Author(s):  
Bastian Alt ◽  
Daniel Klüh ◽  
Matthias Gaderer
Keyword(s):  
Particulate Matter ◽  
Separation Efficiency ◽  
Reference Signal ◽  
Biomass Combustion ◽  
Monitoring Method ◽  
Secondary Precipitation ◽  
Measured Efficiency ◽  
Electrostatic Precipitators ◽  
Emission Limits ◽  
Suitable Reference

AbstractCombustion plants based on wooden biomass as fuel can contribute to a decarbonization of the energy sector by reducing the need for fossil energy usage, which decreases the net carbon dioxide output in the atmosphere. However, the flue gas of biomass-based combustion plants contains increased amounts of particulate matter, which need to be separated before release into the environment because of legal emission limits. In medium-sized plants, electrostatic precipitators (ESP) are commonly used separators to minimize the particulate matter concentration. Due to new regulations based on the medium combustion plants directive introduced by the EU, continuous surveillance of secondary precipitation technologies like ESP has to be implemented. The method proposed in this paper focuses on the readily available current (I) and voltage (U) data of the high-voltage unit supply of an ESP to calculate the efficiency of the particle separation. Consequently, a continuous proof of function can be delivered without high cost for additional measurement equipment. This article proves the effectiveness of the method in calculating the precipitation effectiveness of the ESP. It is shown that the deviation from the separation efficiency calculated by the method and the measured efficiency is smaller than 7%. Additionally, it is necessary to define a suitable reference signal that indicates whether the combustion plant is running or not. Hence, the availability of the system can be evaluated. This method will help operators to meet legal requirements.

scholarly journals Fossil vs. non-fossil sources of fine carbonaceous aerosols in four Chinese cities during the extreme winter haze episode of 2013

2015 ◽  
Vol 15 (3) ◽  
pp. 1299-1312 ◽  
Author(s):  
Y.-L. Zhang ◽  
R.-J. Huang ◽  
I. El Haddad ◽  
K.-F. Ho ◽  
J.-J. Cao ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Organic Carbon ◽  
Biomass Burning ◽  
Water Soluble ◽  
Total Carbon ◽  
World Health ◽  
Biomass Combustion ◽  
Carbonaceous Aerosols ◽  
Haze Episode ◽  
Mass Concentrations

Abstract. During winter 2013, extremely high concentrations (i.e., 4–20 times higher than the World Health Organization guideline) of PM2.5 (particulate matter with an aerodynamic diameter < 2.5 μm) mass concentrations (24 h samples) were found in four major cities in China including Xi'an, Beijing, Shanghai and Guangzhou. Statistical analysis of a combined data set from elemental carbon (EC), organic carbon (OC), 14C and biomass-burning marker measurements using Latin hypercube sampling allowed a quantitative source apportionment of carbonaceous aerosols. Based on 14C measurements of EC fractions (six samples each city), we found that fossil emissions from coal combustion and vehicle exhaust dominated EC with a mean contribution of 75 ± 8% across all sites. The remaining 25 ± 8% was exclusively attributed to biomass combustion, consistent with the measurements of biomass-burning markers such as anhydrosugars (levoglucosan and mannosan) and water-soluble potassium (K+). With a combination of the levoglucosan-to-mannosan and levoglucosan-to-K+ ratios, the major source of biomass burning in winter in China is suggested to be combustion of crop residues. The contribution of fossil sources to OC was highest in Beijing (58 ± 5%) and decreased from Shanghai (49 ± 2%) to Xi'an (38 ± 3%) and Guangzhou (35 ± 7%). Generally, a larger fraction of fossil OC was from secondary origins than primary sources for all sites. Non-fossil sources accounted on average for 55 ± 10 and 48 ± 9% of OC and total carbon (TC), respectively, which suggests that non-fossil emissions were very important contributors of urban carbonaceous aerosols in China. The primary biomass-burning emissions accounted for 40 ± 8, 48 ± 18, 53 ± 4 and 65 ± 26% of non-fossil OC for Xi'an, Beijing, Shanghai and Guangzhou, respectively. Other non-fossil sources excluding primary biomass burning were mainly attributed to formation of secondary organic carbon (SOC) from non-fossil precursors such as biomass-burning emissions. For each site, we also compared samples from moderately to heavily polluted days according to particulate matter mass. Despite a significant increase of the absolute mass concentrations of primary emissions from both fossil and non-fossil sources during the heavily polluted events, their relative contribution to TC was even decreased, whereas the portion of SOC was consistently increased at all sites. This observation indicates that SOC was an important fraction in the increment of carbonaceous aerosols during the haze episode in China.

Collection of Ultrafine Diesel Particulate Matter (DPM) in Cylindrical Single-Stage Wet Electrostatic Precipitators

2006 ◽  
Vol 40 (24) ◽  
pp. 7890-7895 ◽  
Author(s):  
Phirun Saiyasitpanich ◽  
Tim C. Keener ◽  
Mingming Lu ◽  
Soon-Jai Khang ◽  
Douglas E. Evans
Keyword(s):  
Particulate Matter ◽  
Single Stage ◽  
Diesel Particulate Matter ◽  
Diesel Particulate ◽  
Electrostatic Precipitators

Impact of Biomass Combustion on Urban Fine Particulate Matter in Central and Northern Europe

2008 ◽  
Vol 191 (1-4) ◽  
pp. 265-277 ◽  
Author(s):  
Sanna K. Saarikoski ◽  
Markus K. Sillanpää ◽  
Karri M. Saarnio ◽  
Risto E. Hillamo ◽  
Arto S. Pennanen ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Fine Particulate Matter ◽  
Biomass Combustion ◽  
Northern Europe ◽  
Fine Particulate

scholarly journals Source influence on emission pathways and ambient PM<sub>2.5</sub> pollution over India (2015–2050)

2018 ◽  
Vol 18 (11) ◽  
pp. 8017-8039 ◽  
Author(s):  
Chandra Venkataraman ◽  
Michael Brauer ◽  
Kushal Tibrewal ◽  
Pankaj Sadavarte ◽  
Qiao Ma ◽  
...  
Keyword(s):  
Air Pollution ◽  
Particulate Matter ◽  
Air Quality ◽  
Urban Areas ◽  
Energy Demand ◽  
Biomass Combustion ◽  
Anthropogenic Source ◽  
Population Exposure ◽  
Future Economic Development ◽  
Future Air Pollution

Abstract. India is currently experiencing degraded air quality, and future economic development will lead to challenges for air quality management. Scenarios of sectoral emissions of fine particulate matter and its precursors were developed and evaluated for 2015–2050, under specific pathways of diffusion of cleaner and more energy-efficient technologies. The impacts of individual source sectors on PM2.5 concentrations were assessed through systematic simulations of spatially and temporally resolved particulate matter concentrations, using the GEOS-Chem model, followed by population-weighted aggregation to national and state levels. We find that PM2.5 pollution is a pan-India problem, with a regional character, and is not limited to urban areas or megacities. Under present-day emissions, levels in most states exceeded the national PM2.5 annual standard (40 µg m−3). Sources related to human activities were responsible for the largest proportion of the present-day population exposure to PM2.5 in India. About 60 % of India's mean population-weighted PM2.5 concentrations come from anthropogenic source sectors, while the remainder are from other sources, windblown dust and extra-regional sources. Leading contributors are residential biomass combustion, power plant and industrial coal combustion and anthropogenic dust (including coal fly ash, fugitive road dust and waste burning). Transportation, brick production and distributed diesel were other contributors to PM2.5. Future evolution of emissions under regulations set at current levels and promulgated levels caused further deterioration of air quality in 2030 and 2050. Under an ambitious prospective policy scenario, promoting very large shifts away from traditional biomass technologies and coal-based electricity generation, significant reductions in PM2.5 levels are achievable in 2030 and 2050. Effective mitigation of future air pollution in India requires adoption of aggressive prospective regulation, currently not formulated, for a three-pronged switch away from (i) biomass-fuelled traditional technologies, (ii) industrial coal-burning and (iii) open burning of agricultural residue. Future air pollution is dominated by industrial process emissions, reflecting larger expansion in industrial, rather than residential energy demand. However, even under the most active reductions envisioned, the 2050 mean exposure, excluding any impact from windblown mineral dust, is estimated to be nearly 3 times higher than the WHO Air Quality Guideline.

Sign in / Sign up

Export Citation Format

Share Document