Microstructural Characterization of the Face-Centered Cubic-to-Hexagonal Close-Packed Transition in a Cobalt-Base Alloy and its Effect on Mechanical Strength

2018 ◽  
Vol 7 (3) ◽  
pp. 288-297 ◽  
Author(s):  
H. M. Tawancy
Keyword(s):  
Mechanical Strength ◽  
Base Alloy ◽  
Microstructural Characterization ◽  
Face Centered Cubic ◽  
Hexagonal Close Packed ◽  
The Face ◽  
Cobalt Base Alloy ◽  
Face Centered ◽  
Cobalt Base

CONICRO 5010W

Alloy Digest ◽  
1997 ◽  
Vol 46 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Face Centered Cubic ◽  
Aerospace Applications ◽  
Cobalt Base Alloy ◽  
Cubic Structure ◽  
Face Centered ◽  
Cobalt Base

Abstract Conicro 5010W has a face-centered cubic structure and is a cobalt-base alloy containing chromium, tungsten, and nickel. The alloy is used in aerospace applications and in the heat-treatment industry. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: CO-103. Producer or source: VDM Technologies Corporation.

Co-sintering and microstructural characterization of steel/cobalt base alloy bimaterials

2011 ◽  
Vol 47 (4) ◽  
pp. 1875-1886 ◽  
Author(s):  
Céline Pascal ◽  
Aurélie Thomazic ◽  
Annie Antoni-Zdziobek ◽  
Jean-Marc Chaix
Keyword(s):  
Base Alloy ◽  
Microstructural Characterization ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Synthesis and Characterization of Cobalt-Nickel Nanowires Formed under External Magnetic Field

2015 ◽  
Vol 799-800 ◽  
pp. 120-124 ◽  
Author(s):  
Mary Donnabelle L. Balela ◽  
Lalaine M. Dulin ◽  
Erica A. Garcia ◽  
M. Janelle H. Tica
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hexagonal Close Packed ◽  
Cobalt Nickel ◽  
Nickel Nanowires ◽  
Face Centered

Cobalt-nickel (Co-Ni) nanowires were formed by electroless deposition in ethylene glycol under external magnetic field. The effects of initial Co (II) and Ni (II) concentration on the surface and morphology of the synthesized nanowires were investigated by x-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. An increase in the Co (II) concentration resulted in increase in diameter of the nanowires. However, the length of nanowires was observed to decrease. Higher Co (II) concentration resulted in a mixture of hexagonal close-packed and face-centered cubic Co-Ni nanowires. X-ray diffraction revealed that crystal growth occurred when the nanowires are annealed at 653 K for 10h.

scholarly journals Preparation and Characterization of porous Carbon/Nickel Nanofibers for Supercapacitor

2013 ◽  
Vol 8 (4) ◽  
pp. 155892501300800 ◽  
Author(s):  
Dawei Gao ◽  
Lili Wang ◽  
Xin Xia ◽  
Hui Qiao ◽  
Yibing Cai ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Porous Carbon ◽  
Composite Nanofibers ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Nickel Particles ◽  
The Face ◽  
Embedded Particles ◽  
Face Centered

Two polymer solutions of polyacrylonitrile, polyvinyl pyrrolidone, and Ni(CH3COOH)2 in dimethylformamide were electrospun into ternary composite nanofibers, followed by stabilization and carbonization processes to obtain porous carbon/nickel composite nanofibers with diameters of 100–200 nm. The study revealed that carbon/nickel composite nanofibers were successfully prepared, which allowed nickel particles with diameters of 20–70 nm to be uniformly distributed in the carbon nanofibers. It was also observed that the fibrous structures with particles embedded formed and the fibers broke into shorter fibers after sintering. X-ray diffraction indicated that embedded particles crystallized with the face centered cubic structure. The Brunauer-Emmett-Teller analysis revealed that carbon/nickel composite nanofibers with meso-pores possessed larger specific surface area than that of carbon nanofibers. The specific capacitance of the composite nanofiber electrode was as high as 103.8 F/g and showed stable cyclicity (73.8%).

Preparation and Characterization of the Ordered SiO2 Colloidal Crystallization Films

2008 ◽  
Vol 368-372 ◽  
pp. 1389-1391 ◽  
Author(s):  
Shuan Gui Qing ◽  
Bo Liu ◽  
Xun Liang ◽  
Hai Yang Li ◽  
Wei Zhong Lv ◽  
...  
Keyword(s):  
Self Assembly ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Assembly Method ◽  
Colloidal Crystallization ◽  
The Face ◽  
Infrared Spectrometer ◽  
Face Centered ◽  
Sio2 Spheres

Multilayer SiO2 crystals modified by alkoxysilanes were fabricated by the vertical deposition technique combined with self-assembly method. The SiO2 colloidal crystallization was prepared by the traditional Stöber-Fink-Bohn method, and modified by different alkoxysilanes to investigate the properties of the films. The films fabricated by the ordering of SiO2 spheres were investigated by infrared spectrometer, X-ray diffraction, scanning electron microscope, UV-visible spectrophotometer. The results showed that thin film is the face-centered cubic structures and the spheres are [111]-oriented.

scholarly journals BIOREDUCTION AND CHARACTERIZATION OF SILVER NANOPARTICLES FROM OIL PALM EMPTY FRUIT BUNCH

2020 ◽  
Vol 21 (4) ◽  
pp. 177
Author(s):  
Siti Suhartati ◽  
Iwan Syahjoko Saputra ◽  
Dwinna Rahmi ◽  
Yoki Yulizar ◽  
Sudirman Sudirman
Keyword(s):  
Silver Nanoparticles ◽  
Oil Palm ◽  
Average Particle Size ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Empty Fruit Bunch ◽  
The Face ◽  
Face Centered ◽  
Average Size

BIOREDUCTION AND CHARACTERIZATION OF SILVER NANOPARTICLES FROM OIL PALM EMPTY FRUIT BUNCH (OPEFB). The synthesis of silver nanoparticles was successfully carried out by extracting oil palm empty fruit bunch. The precursor used was silver nitrate (AgNO3) with a concentration of 9x10-4 M and 5 wt% of the oil palm empty fruit bunch extract. OPEFB acted as a capping agent in the synthesis of silver nanoparticles. The bioreduction method Ag+ to Ag0 produced a silver nanoparticle colloid in brown color. The results of the UV-Vis spectrophotometer showed the silver nanoparticles colloids spectrum at a wavelength of 420 nm with an absorbance value of 0.5. FTIR shows the reduction and shift of absorption peak in the hydroxyl functional group (-OH) at wavenumbers of 3323 cm-1 and the presence of absorption peaks at 560 cm-1. While, XRD pattern showed the specific crystallinity peaks of silver nanoparticles at 2θ: 33.24°; 39.98°; 61.23°; dan 79.13° respectively with the face-centered cubic crystal structure (FCC) and crystallite size of 15 nm. PSA analysis showed two specific peaks with an average size distribution silver nanoparticles of 43.5 nm and a PDI value of 0.4. Analysis of TEM shows the average particle size of 20 nm with a spherical particle shape.

Sign in / Sign up

Export Citation Format

Share Document