Synthesis and Characterization of the Face-Centered Cubic Clusters [(Me3tacn)8M8Pt6(CN)24]12+ (M = Cr, Mo)

2007 ◽  
Vol 18 (3) ◽  
pp. 575-596 ◽  
Author(s):  
Lianne M. C. Beltran ◽  
Jennifer J. Sokol ◽  
Jeffrey R. Long
Keyword(s):  
Synthesis And Characterization ◽  
Face Centered Cubic ◽  
The Face ◽  
Face Centered

scholarly journals Preparation and Characterization of porous Carbon/Nickel Nanofibers for Supercapacitor

2013 ◽  
Vol 8 (4) ◽  
pp. 155892501300800 ◽  
Author(s):  
Dawei Gao ◽  
Lili Wang ◽  
Xin Xia ◽  
Hui Qiao ◽  
Yibing Cai ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Porous Carbon ◽  
Composite Nanofibers ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Nickel Particles ◽  
The Face ◽  
Embedded Particles ◽  
Face Centered

Two polymer solutions of polyacrylonitrile, polyvinyl pyrrolidone, and Ni(CH3COOH)2 in dimethylformamide were electrospun into ternary composite nanofibers, followed by stabilization and carbonization processes to obtain porous carbon/nickel composite nanofibers with diameters of 100–200 nm. The study revealed that carbon/nickel composite nanofibers were successfully prepared, which allowed nickel particles with diameters of 20–70 nm to be uniformly distributed in the carbon nanofibers. It was also observed that the fibrous structures with particles embedded formed and the fibers broke into shorter fibers after sintering. X-ray diffraction indicated that embedded particles crystallized with the face centered cubic structure. The Brunauer-Emmett-Teller analysis revealed that carbon/nickel composite nanofibers with meso-pores possessed larger specific surface area than that of carbon nanofibers. The specific capacitance of the composite nanofiber electrode was as high as 103.8 F/g and showed stable cyclicity (73.8%).

Preparation and Characterization of the Ordered SiO2 Colloidal Crystallization Films

2008 ◽  
Vol 368-372 ◽  
pp. 1389-1391 ◽  
Author(s):  
Shuan Gui Qing ◽  
Bo Liu ◽  
Xun Liang ◽  
Hai Yang Li ◽  
Wei Zhong Lv ◽  
...  
Keyword(s):  
Self Assembly ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Assembly Method ◽  
Colloidal Crystallization ◽  
The Face ◽  
Infrared Spectrometer ◽  
Face Centered ◽  
Sio2 Spheres

Multilayer SiO2 crystals modified by alkoxysilanes were fabricated by the vertical deposition technique combined with self-assembly method. The SiO2 colloidal crystallization was prepared by the traditional Stöber-Fink-Bohn method, and modified by different alkoxysilanes to investigate the properties of the films. The films fabricated by the ordering of SiO2 spheres were investigated by infrared spectrometer, X-ray diffraction, scanning electron microscope, UV-visible spectrophotometer. The results showed that thin film is the face-centered cubic structures and the spheres are [111]-oriented.

scholarly journals BIOREDUCTION AND CHARACTERIZATION OF SILVER NANOPARTICLES FROM OIL PALM EMPTY FRUIT BUNCH

2020 ◽  
Vol 21 (4) ◽  
pp. 177
Author(s):  
Siti Suhartati ◽  
Iwan Syahjoko Saputra ◽  
Dwinna Rahmi ◽  
Yoki Yulizar ◽  
Sudirman Sudirman
Keyword(s):  
Silver Nanoparticles ◽  
Oil Palm ◽  
Average Particle Size ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Empty Fruit Bunch ◽  
The Face ◽  
Face Centered ◽  
Average Size

BIOREDUCTION AND CHARACTERIZATION OF SILVER NANOPARTICLES FROM OIL PALM EMPTY FRUIT BUNCH (OPEFB). The synthesis of silver nanoparticles was successfully carried out by extracting oil palm empty fruit bunch. The precursor used was silver nitrate (AgNO3) with a concentration of 9x10-4 M and 5 wt% of the oil palm empty fruit bunch extract. OPEFB acted as a capping agent in the synthesis of silver nanoparticles. The bioreduction method Ag+ to Ag0 produced a silver nanoparticle colloid in brown color. The results of the UV-Vis spectrophotometer showed the silver nanoparticles colloids spectrum at a wavelength of 420 nm with an absorbance value of 0.5. FTIR shows the reduction and shift of absorption peak in the hydroxyl functional group (-OH) at wavenumbers of 3323 cm-1 and the presence of absorption peaks at 560 cm-1. While, XRD pattern showed the specific crystallinity peaks of silver nanoparticles at 2θ: 33.24°; 39.98°; 61.23°; dan 79.13° respectively with the face-centered cubic crystal structure (FCC) and crystallite size of 15 nm. PSA analysis showed two specific peaks with an average size distribution silver nanoparticles of 43.5 nm and a PDI value of 0.4. Analysis of TEM shows the average particle size of 20 nm with a spherical particle shape.

scholarly journals Nano Synthesis and Characterization of Complex Derived from Silver Metal Conjugated with Midodrine Hydrochloride

2021 ◽  
Vol 37 (1) ◽  
pp. 157-161
Author(s):  
Namita Bharadwaj ◽  
Jaishri Kaushik
Keyword(s):  
Stability Constant ◽  
Silver Nanoparticle ◽  
Metal Ion ◽  
Ratio Method ◽  
Synthesis And Characterization ◽  
Face Centered Cubic ◽  
Uv Visible ◽  
Face Centered ◽  
The Stability

The stability constant Kf for the complexation of Ag(Ⅰ) metal ion with Midodrine hydrochloride were determinedby spectrophotometric method at room temperature .The colored complexes were measured at 300 nm. The stability constant of the complexes were found to be 5.47 by mole ratio method. The stoichiometry of the complexes formed between the Midodrine drug and Ag (Ⅰ) metal ion are 1:1 M/L ratio. Silver conjugated Midodrine hydrochloride Nano synthesized and characterized by UV/Visible spectroscopy, SEM, XRD and FT-IR. The UV/Visible spectra of Midodrine –Ag nanoparticle in the range of 322 nm. XRD conformThe crystallite size of Midodrine - Ag (Ⅰ) nanoparticles are found to be 64.5 nmfrom Debye Scherer formula.Thecrystallinity of nanoparticles is Face centered cubic structure. SEM conform of particle size and surface morphology, FTIR analyzed involvement of -NH2 group in Midodrine is the stabilized of silver nanoparticle. This research is focuses on complexation, Nano synthesis and characterization of Drug-silver nanoparticle for antihypotention therapy.

Synthesis and Characterization of Silver Nanowires

2013 ◽  
Vol 678 ◽  
pp. 212-216
Author(s):  
Subbaiyan Sugapriya ◽  
Rangarajalu Sriram ◽  
Sriram Lakshmi
Keyword(s):  
Silver Nanowires ◽  
Synthesis And Characterization ◽  
Face Centered Cubic ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Face Centered ◽  
Fcc Structure

ABSTRACT Silver nanowires have been synthesized by polyol process with ethylene glycol as solvent and PVP as capping agent. The silver nanowires have been characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), and Transmission electron microscope (TEM) techniques. The prepared silver nanowires were found to exhibit face-centered cubic (fcc) structure. The diameter of the prepared silver nanowires have been found to lie in the range of 60 - 80 nm and the length of the wires have been observed to be in the range of 10-20 µm. The I-V characteristics have been carried out to study the conducting behavior of the prepared silver nanowires.

Synthesis and Characterization of Ru Cubic Nanocages with a Face-Centered Cubic Structure by Templating with Pd Nanocubes

Nano Letters ◽  
2016 ◽  
Vol 16 (8) ◽  
pp. 5310-5317 ◽  
Author(s):  
Ming Zhao ◽  
Legna Figueroa-Cosme ◽  
Ahmed O. Elnabawy ◽  
Madeline Vara ◽  
Xuan Yang ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Face Centered Cubic ◽  
Cubic Structure ◽  
Face Centered

scholarly journals Digital Objects in Rhombic Dodecahedron Grid

2020 ◽  
Vol 4 (1) ◽  
pp. 143-158
Author(s):  
Ranita Biswas ◽  
Gaëlle Largeteau-Skapin ◽  
Rita Zrour ◽  
Eric Andres
Keyword(s):  
Coordinate System ◽  
Grid Point ◽  
Close Packing ◽  
Face Centered Cubic ◽  
Rhombic Dodecahedron ◽  
Topological Features ◽  
Digital Plane ◽  
The Face ◽  
Face Centered

AbstractRhombic dodecahedron is a space filling polyhedron which represents the close packing of spheres in 3D space and the Voronoi structures of the face centered cubic (FCC) lattice. In this paper, we describe a new coordinate system where every 3-integer coordinates grid point corresponds to a rhombic dodecahedron centroid. In order to illustrate the interest of the new coordinate system, we propose the characterization of 3D digital plane with its topological features, such as the interrelation between the thickness of the digital plane and the separability constraint we aim to obtain. We also present the characterization of 3D digital lines and study it as the intersection of multiple digital planes. Characterization of 3D digital sphere with relevant topological features is proposed as well along with the 48-symmetry appearing in the new coordinate system.

Characterization of Reactively Sputtered Titanium Carbide Films by Analytical Electron Microscopy

1985 ◽  
Vol 62 ◽  
Author(s):  
J. Tafto ◽  
G. Rajeswaran ◽  
T. Saulys
Keyword(s):  
Electron Microscopy ◽  
Core Loss ◽  
Analytical Electron Microscopy ◽  
Face Centered Cubic ◽  
Transmission Electron ◽  
Partial Pressures ◽  
The Face ◽  
Face Centered ◽  
Electron Energy Loss

ABSTRACTTICx films prepared by reactive sputtering using a Ti target and different methane partial pressures were characterized by analytical transmission electron microscopy. The films are polycrystalline, and the plasmon energy increases considerably with increasing carbon content. Combination of the information obtained from electron energy loss plasmon and core loss spectra, and electron diffraction indicates that x in TiCx increases linearly with methane partial pressure. We find that the face centered cubic TIC phase spans the composition from TiC0.2 to TiC1.0 and when x<l we have a mixture of TiC1.0 and amorphous C.

scholarly journals Characterization of crystal structure and precipitation crystallography of a new MgxAl2−xGd phase in an Mg97Al1Gd2alloy

2016 ◽  
Vol 49 (4) ◽  
pp. 1177-1181 ◽  
Author(s):  
X.-F. Gu ◽  
T. Furuhara
Keyword(s):  
Crystal Structure ◽  
Lattice Parameter ◽  
Face Centered Cubic ◽  
Laves Phases ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
The Matrix ◽  
The Face ◽  
Face Centered

The composition, crystal structure and precipitation crystallography of a newly found precipitate are characterized by Cs-corrected scanning transmission electron microscopy. The composition of the plate-like precipitate could be expressed as MgxAl2−xGd (x= 0.38), and its crystal structure is the same as the face-centered cubic type Laves phases Mg2Gd and Al2Gd, with a lattice parameter of 7.92 Å (space group No. 227, Fd\overline 3m). The orientation relationship between the matrix and precipitate is found to be (0001)m//(111)pand [10\overline 10]m//[1\overline 10]p, and the habit plane is parallel to the (0001)m//(111)pplane. In addition, this preferred crystallography of phase transformation is well explained on the basis of the atomic matching at the interface.

Sign in / Sign up

Export Citation Format

Share Document