An Experimental Exploration on Pressure-Compensated Swash Plate-Type Variable Displacement Axial Piston Pump

Author(s):  
N. Mondal ◽  
R. Saha ◽  
D. Sanyal
Author(s):  
Nitesh MONDAL

This work presents a simple design procedure of a pressure compensator of a swash plate type variable displacement axial piston pump (VDAPP). The route of the work mainly focuses on static design through balancing the torque given by the pump pistons, rate cylinder and strok- ing cylinder on the swash plate during cut-in (maximum flow) and cut-off (minimum flow) pressure condition of the system with an objective of minimizing the output pressure ripples. The outcome in terms of pressure from the dynamic simulation of the designed compensator with pump has been compare with experimental result obtained from a reference commercial pump has compensator with duel spool. The model has been used for performance prediction for wide variations of the load valve area settings.


Author(s):  
Xiangxu Meng ◽  
Chang Ge ◽  
Hongxi Liang ◽  
Xiqun Lu ◽  
Xuan Ma

An analytical approach based on a hydrodynamic lubrication model is presented to understand the bearing capacity, leakage, and friction moment of the slipper–swash-plate interface in a swash-plate-type axial piston pump. Furthermore, how the shaft speed, load pressure, and slipper attitude influence the lubrication performance of the interface is analyzed. The research shows that the slipper attitude has a significant effect on the pressure distribution. To improve the lubrication performance, a grooved sealing-land design is proposed, and the location and geometric parameters of the groove are analyzed. The results indicate that the optimal lubrication performance is achieved when the groove is 2.0–3.0 mm wide and 5–20 µm deep at its inner boundary.


Author(s):  
Yang Pan ◽  
Yibo Li ◽  
Dedong Liang

The vibration of a swash plate is caused by the piston forces and the control actuator acting on the swash plate. An earlier study of the outlet flow ripple of variable-displacement axial piston pumps assumed a fixed swash plate angle; it ignored the influence of swash plate vibration on the outlet flow ripple of the axial piston pump. In this work, a theoretical model of the outlet flow ripple and pressure pulsation was established in a constant power variable-displacement piston pump. The vibration of swash plate, flow leakage, and valve dynamic characteristics are considered in the theoretical model. The computational results of the theoretical model at different external load pressures are verified by comparison with experimental results. The vibration of the swash plate is strongly influenced by both the piston chamber pressure variation and the control actuator mechanism. The study proved the influence of the swash plate vibration on the outlet flow ripple and the pressure pulsation of an axial piston pump. Compared to the case of a fixed swash plate angle, accounting for swash plate vibration is much more suitable for the accurate determination of the outlet flow ripple and pressure pulsation of an axial piston pump. It is also shown that the vibration of the swash plate affects the valve plate design. Accordingly, valve plate optimization based on the theoretical model of the outlet flow ripple was also studied in this work. The amplitude of the instantaneous outlet flow ripple was considered as the optimization objective function. Finally, the optimized design parameters for a constant power variable-displacement swash plate axial piston pump were evaluated.


Sign in / Sign up

Export Citation Format

Share Document