AbstractThe crystalline, optical and electrical properties of In2S3 containing copper thin films are investigated. Increasing the amount of copper within the In2S3 crystalline matrix yields reduced bandgap value and hindered conductivity. The films investigated being synthesized at low temperature (200 °C), it is likely they have similar properties as the materials formed at the CuIn1-xGaxSe2/In2S3 interface.
ABSTRACTWe have grown high-mobility LWIR HgCdTe thin films on CdTe substrates, using molecular beam epitaxy (MBE). The structural, optical, and electrical properties of these epilayers were determined by SEM, DCRC, FTIR, and Hall effect measurements. For films of 10 to 11 µm thick and composition X value ranging from 0.152 to 0.172, the highest mobility observed was 7.5 × 105 cm2 /V-sec, and the FWHMs of the rocking curves were 75 to 110 arcsec. We also have carried out the temperature-dependent EXAFS study of HgCdTe.
CdHgTe thin films were grown onto glass substrate via the Chemical bath deposition technique. XRD results indicate that a CdHgTe formed with a cubic polycrystalline structure. The crystallinity of CdHgTe thin films is gradually deteriorate with increasing the gamma irradiation. EDS spectrums confirms the presence of Cd, Hg and Te elements. DC electrical conductivity results depicted the conductivity of CdHgTe increase with increasing a gamma ray dosage
Structural, optical and electrical properties of Al+MoO3 and Au+MoO3 thin films prepared by simultaneous magnetron sputtering deposition were investigated. The influence of MoO3 sputtering power on the Al and Au nanoparticle formation and spatial distribution was explored. We demonstrated the formation of spatially arranged Au nanoparticles in the MoO3 matrix, while Al incorporates in the MoO3 matrix without nanoparticle formation. The dependence of the Au nanoparticle size and arrangement on the MoO3 sputtering power was established. The Al-based films show a decrease of overall absorption with an Al content increase, while the Au-based films have the opposite trend. The transport properties of the investigated films also are completely different. The resistivity of the Al-based films increases with the Al content, while it decreases with the Au content increase. The reason is a different transport mechanism that occurs in the films due to their different structural properties. The choice of the incorporated material (Al or Au) and its volume percentage in the MoO3 matrix enables the design of materials with desirable optical and electrical characteristics for a variety of applications.
Structural, Optical and Electrical Properties of Al+MoO3 and Au+MoO3 Thin Films Prepared by Magnetron Codeposition