Characterization of chitosan by pyrolysis-mass spectrometry, thermal analysis and differential scanning calorimetry

1991 ◽  
Vol 176 ◽  
pp. 63-68 ◽  
Author(s):  
J.M. Nieto ◽  
C. Peniche-Covas ◽  
G. Padro´n
Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4653
Author(s):  
Jakub Herman ◽  
Piotr Harmata ◽  
Michał Czerwiński ◽  
Olga Strzeżysz ◽  
Marta Pytlarczyk ◽  
...  

The synthesis and characterization of new deuterated liquid crystal (LC) compounds based on phenyl tolane core is described in this paper. The work presents an alternative molecular approach to the conventional LC design. Correlations between molecular structure and mesomorphic and optical properties for compounds which are alkyl-hydrogen terminated and alkyl-deuterium, have been drawn. The compounds are characterized by mass spectrometry (electron ionization) analysis and infrared spectroscopy. They show enantiotropic nematic behavior in a broad temperature range, confirmed by a polarizing thermomicroscopy and differential scanning calorimetry. Detailed synthetic procedures are attached. Synthesized compounds show a significantly reduced absorption in the near-infrared (NIR) and medium-wavelength infrared (MWIR) radiation range, and stand as promising components of medium to highly birefringent liquid crystalline mixtures.


2008 ◽  
Vol 33 (4) ◽  
pp. 61-68 ◽  
Author(s):  
C. T. de Carvalho ◽  
A. B. Siqueira ◽  
E. Y. Ionashiro ◽  
M. Pivatto ◽  
M. Ionashiro

The 2-methoxycinnamylidenepyruvic acid (2-MeO-HCP) was synthesized and characterized for nuclear magnetic resonance (¹H and 13C NMR), mass spectrometry (MS), Infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The application of DSC for purity determination is well documented in literature and is used in the analysis of pure organic compounds. The molecular geometry and vibrational frequencies of 2-MeO-HCP have been calculated.


1999 ◽  
Vol 72 (1) ◽  
pp. 165-173 ◽  
Author(s):  
D. J. Burlett

Abstract Elastomers are used in many industrial applications because of their remarkable toughness and elasticity. However, the source of these properties is also a weakness, in that loss of properties via oxidation is an important factor in their selection. Thermoanalytical techniques, such as differential scanning calorimetry (DSC), provide useful tools for the characterization of the stability of elastomers. DSC can not only be used to determine oxidative induction times under isothermal conditions but can also be used to determine apparent overall activation energies of the oxidation process. An evaluation of these techniques is made and the technique is used to compare the oxidation susceptibility of polybutadienes of different microstructure. The results of these DSC scans are interpreted in terms of the chemistry of the oxidation process using FTIR results.


1999 ◽  
Vol 55 (6) ◽  
pp. 947-952 ◽  
Author(s):  
J. J. Criado ◽  
A. Jiménez-Sánchez ◽  
F. H. Cano ◽  
R. Sáez-Puche ◽  
E. Rodríguez-Fernández

Tetrachlorocobaltates(II) of diprotonated α,ω-diaminoalkanes with the formula [NH3(CH2) n NH3]CoCl4, where n = 5 (cadaverine; 1,5-pentanediammonium tetrachlorocobaltate), 8 (1,8-octanediammonium tetrachlorocobaltate) and 10 (1,10-decanediammonium tetrachlorocobaltate), were prepared. The compounds were studied by mass spectrometry, FT-IR and visible spectroscopy, magnetic susceptibility techniques and thermal analysis. The compounds contain the tetrahedral tetrachlorocobaltate(II) ion and the corresponding diprotonated diamine (cadaverine, 1,8-octamethylenediamine and 1,10-decamethylenediamine). The compound corresponding to cadaverine crystallizes in the monoclinic space group P21/c, with lattice parameters a = 7.1633 (7), b = 15.940 (3), c = 11.137 (2) Å, β = 98.44 (1)° and Z = 4. Its crystal structure contains slightly distorted tetrahedral CoCl_4^{2-} ions: the largest difference in Co—Cl bond lengths is 0.029 Å and the largest difference in Cl—Co—Cl angles is 7.76°. The compound also contains diprotonated cadaverine ions. An extensive hydrogen-bonding network connects these ions. The slightly positive deviations of the magnetic susceptibility from the Curie–Weiss law are in agreement with the 4 A 2 ground state for the tetrachlorocobaltate anion. The compounds with eight and ten C atoms show phase transitions in the solid state and a greater complexity is observed in their differential scanning calorimetry curves. Unfortunately, no suitable single crystals of these could be obtained.


2013 ◽  
Vol 709 ◽  
pp. 28-31
Author(s):  
Cheng Xue Wang ◽  
Tian Tian Liang ◽  
Chun Qiao Wei

Starting with boric acid and triethanolamine , the effect of the different types of the water-carrying agent on the yield was invested, and influences of dosage of water-carrying agent ,the mole ratio of reactants, reaction time on yield were discussed, the optimized reaction conditions were confirmed. The structure of the product was described by Fourier transform-infrared (FT-IR) spectroscopy, NMR Spectroscopy analysis, mass spectrometry (MS) and thermodynamic properties was analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG).


2017 ◽  
Vol 53 (2) ◽  
pp. 107-114 ◽  
Author(s):  
M. Voncina ◽  
M. Petric ◽  
P. Mrvar ◽  
J. Medved

The AM60 alloy was thermodynamically examined using chemical analysis, thermodynamic calculation made by ThermoCalc program, ?in situ? thermal analysis and differential scanning calorimetry (DSC), whereas the microstructure constituents were confirmed using optical and scanning electron microscopy (SEM). At the eutectic temperature of 437 ?C the equilibrium solubility of Al in Mg is 12.6 wt. % Al. On the boundaries of the primary Mg grains the intermetallic compound of Al12Mg17 is precipitating according to the solvus line of the Mg-Al phase diagram. Solidification of the AM60 alloy has been investigated using ?in situ? simple thermal analysis. The investigation of solidification has been taking place by evaluation of the cooling curves in connection with metallographic examinations, differential scanning calorimetry and thermodynamic calculations. All defects, nonmetallic inclusions and intermetallic compounds that occur in investigated AM60 alloy were identified.


Sign in / Sign up

Export Citation Format

Share Document