Real-time interval technique for electronic shearing speckle pattern interferometry

1994 ◽  
Vol 21 (4) ◽  
pp. 241-248 ◽  
Author(s):  
Yuwen Qin ◽  
Jiabin Dai
Keyword(s):  
Real Time ◽  
Speckle Pattern ◽  
Time Interval

scholarly journals Improving the Stochastic Model of Ionospheric Delays for BDS Long-Range Real-Time Kinematic Positioning

2021 ◽  
Vol 13 (14) ◽  
pp. 2739
Author(s):  
Huizhong Zhu ◽  
Jun Li ◽  
Longjiang Tang ◽  
Maorong Ge ◽  
Aigong Xu
Keyword(s):  
Real Time ◽  
Long Range ◽  
Ionospheric Delay ◽  
Time Interval ◽  
Short Time Interval ◽  
Dual Frequency ◽  
Triple Frequency ◽  
Ambiguity Fixing ◽  
Power Spectral ◽  
Observation Noise

Although ionosphere-free (IF) combination is usually employed in long-range precise positioning, in order to employ the knowledge of the spatiotemporal ionospheric delays variations and avoid the difficulty in choosing the IF combinations in case of triple-frequency data processing, using uncombined observations with proper ionospheric constraints is more beneficial. Yet, determining the appropriate power spectral density (PSD) of ionospheric delays is one of the most important issues in the uncombined processing, as the empirical methods cannot consider the actual ionosphere activities. The ionospheric delays derived from actual dual-frequency phase observations contain not only the real-time ionospheric delays variations, but also the observation noise which could be much larger than ionospheric delays changes over a very short time interval, so that the statistics of the ionospheric delays cannot be retrieved properly. Fortunately, the ionospheric delays variations and the observation noise behave in different ways, i.e., can be represented by random-walk and white noise process, respectively, so that they can be separated statistically. In this paper, we proposed an approach to determine the PSD of ionospheric delays for each satellite in real-time by denoising the ionospheric delay observations. Based on the relationship between the PSD, observation noise and the ionospheric observations, several aspects impacting the PSD calculation are investigated numerically and the optimal values are suggested. The proposed approach with the suggested optimal parameters is applied to the processing of three long-range baselines of 103 km, 175 km and 200 km with triple-frequency BDS data in both static and kinematic mode. The improvement in the first ambiguity fixing time (FAFT), the positioning accuracy and the estimated ionospheric delays are analysed and compared with that using empirical PSD. The results show that the FAFT can be shortened by at least 8% compared with using a unique empirical PSD for all satellites although it is even fine-tuned according to the actual observations and improved by 34% compared with that using PSD derived from ionospheric delay observations without denoising. Finally, the positioning performance of BDS three-frequency observations shows that the averaged FAFT is 226 s and 270 s, and the positioning accuracies after ambiguity fixing are 1 cm, 1 cm and 3 cm in the East, North and Up directions for static and 3 cm, 3 cm and 6 cm for kinematic mode, respectively.

scholarly journals An LSTM-Based Method Considering History and Real-Time Data for Passenger Flow Prediction

2020 ◽  
Vol 10 (11) ◽  
pp. 3788 ◽  
Author(s):  
Qi Ouyang ◽  
Yongbo Lv ◽  
Jihui Ma ◽  
Jing Li
Keyword(s):  
Feature Extraction ◽  
Real Time ◽  
Short Term Memory ◽  
Historical Data ◽  
Time Interval ◽  
Information Coding ◽  
Time Data ◽  
Passenger Flow ◽  
Flow Prediction ◽  
Real Time Data

With the development of big data and deep learning, bus passenger flow prediction considering real-time data becomes possible. Real-time traffic flow prediction helps to grasp real-time passenger flow dynamics, provide early warning for a sudden passenger flow and data support for real-time bus plan changes, and improve the stability of urban transportation systems. To solve the problem of passenger flow prediction considering real-time data, this paper proposes a novel passenger flow prediction network model based on long short-term memory (LSTM) networks. The model includes four parts: feature extraction based on Xgboost model, information coding based on historical data, information coding based on real-time data, and decoding based on a multi-layer neural network. In the feature extraction part, the data dimension is increased by fusing bus data and points of interest to improve the number of parameters and model accuracy. In the historical information coding part, we use the date as the index in the LSTM structure to encode historical data and provide relevant information for prediction; in the real-time data coding part, the daily half-hour time interval is used as the index to encode real-time data and provide real-time prediction information; in the decoding part, the passenger flow data for the next two 30 min interval outputs by decoding all the information. To our best knowledge, it is the first time to real-time information has been taken into consideration in passenger flow prediction based on LSTM. The proposed model can achieve better accuracy compared to the LSTM and other baseline methods.

A New Method for Phase Difference Estimation Based on Time-Varying Signal Model

2013 ◽  
Vol 333-335 ◽  
pp. 650-655
Author(s):  
Peng Hui Niu ◽  
Yin Lei Qin ◽  
Shun Ping Qu ◽  
Yang Lou
Keyword(s):  
Signal Processing ◽  
Real Time ◽  
Phase Difference ◽  
Time Signal ◽  
Time Interval ◽  
Time Varying ◽  
Signal Model ◽  
Time Frequency ◽  
Mass Flowmeter ◽  
Coriolis Mass Flowmeter

A new signal processing method for phase difference estimation was proposed based on time-varying signal model, whose frequency, amplitude and phase are time-varying. And then be applied Coriolis mass flowmeter signal. First, a bandpass filtering FIR filter was applied to filter the sensor output signal in order to improve SNR. Then, the signal frequency could be calculated based on short-time frequency estimation. Finally, by short window intercepting, the DTFT algorithm with negative frequency contribution was introduced to calculate the real-time phase difference between two enhanced signals. With the frequency and the phase difference obtained, the time interval of two signals was calculated. Simulation results show that the algorithms studied are efficient. Furthermore, the computation of algorithms studied is simple so that it can be applied to real-time signal processing for Coriolis mass flowmeter.

scholarly journals Experimental assessment of harmonic contributions using a ternary pulse sequence

2021 ◽  
Vol 18 (3) ◽  
pp. 271-289
Author(s):  
Evgeniia Bulycheva ◽  
Sergey Yanchenko
Keyword(s):  
Real Time ◽  
Pulse Sequence ◽  
Wide Band ◽  
Voltage Source ◽  
Time Interval ◽  
Time Frequency ◽  
Grid Impedance ◽  
Set Up ◽  
Grid Voltage Distortion ◽  
Operational Modes

Harmonic contributions of utility and customer may feature significant variations due to network switchings and changing operational modes. In order to correctly define the impacts on the grid voltage distortion the frequency dependent impedance characteristic of the studied network should be accurately measured in the real-time mode. This condition can be fulfilled by designing a stimuli generator measuring the grid impedance as a response to injected interference and producing time-frequency plots of harmonic contributions during considered time interval. In this paper a prototype of a stimuli generator based on programmable voltage source inverter is developed and tested. The use of ternary pulse sequence allows fast wide-band impedance measurements that meet the requirements of real-time assessment of harmonic contributions. The accuracy of respective analysis involving impedance determination and calculation of harmonic contributions is validated experimentally using reference characteristics of laboratory test set-up with varying grid impedance.

scholarly journals Internet of medical things – integrated, ultrasound-based respiration monitoring system for incubators

2020 ◽  
Author(s):  
◽  
Tareq Abdulqader
Keyword(s):  
Real Time ◽  
Respiration Rate ◽  
Surface Measurement ◽  
Time Interval ◽  
Portable Devices ◽  
Important Indicator ◽  
The Us ◽  
Respiratory Signal ◽  
Central Apnoea ◽  
Respiration Signal

The study's aim was to develop a non-contact, ultrasound (US) based respiration rate and respiratory signal monitor suitable for babies in incubators. Respiration rate indicates average number of breaths per minute and is higher in young children than adults. It is an important indicator of health deterioration in critically ill patients. The current incubators do not have an integrated respiration monitor due to complexities in its adaptation. Monitoring respiratory signal assists in diagnosing respiration rated problems such as central Apnoea that can affect infants. US sensors are suitable for integration into incubators as US is a harmless and cost-effective technology. US beam is focused on the chest or abdomen. Chest or abdomen movements, caused by respiration process, result in variations in their distance to the US transceiver located at a distance of about 0.5 m. These variations are recorded by measuring the time of flight from transmitting the signal and its reflection from the monitored surface. Measurement of this delay over a time interval enables a respiration signal to be produced from which respiration rate and pauses in breathing are determined. To assess the accuracy of the developed device, a platform with a moving surface was devised. The magnitude and frequency of its surface movement were accurately controlled by its signal generator. The US sensor was mounted above this surface at a distance of 0.5 m. This US signal was wirelessly transmitted to a microprocessor board to digitise. The recorded signal that simulated a respiratory signal was subsequently stored and displayed on a computer or an LCD screen. The results showed that US could be used to measure respiration rate accurately. To cater for possible movement of the infant in the incubator, four US sensors were adapted. These monitored the movements from different angles. An algorithm to interpret the output from the four US sensors was devised and evaluated. The algorithm interpreted which US sensor best detected the chest movements. An IoMT system was devised that incorporated NodeMcu to capture signals from the US sensor. The detected data were transmitted to the ThingSpeak channel and processed in real-time by ThingSpeak’s add-on Matlab© feature. The data were processed on the cloud and then the results were displayed in real-time on a computer screen. The respiration rate and respiration signal could be observed remotely on portable devices e.g. mobile phones and tablets. These features allow caretakers to have access to the data at any time and be alerted to respiratory complications. A method to interpret the recorded US signals to determine respiration patterns, e.g. intermittent pauses, were implemented by utilising Matlab© and ThingSpeak Server. The method successfully detected respiratory pauses by identifying lack of chest movements. The approach can be useful in diagnosing central apnoea. In central apnoea, respiratory pauses are accompanied by cessation of chest or abdominal movements. The devised system will require clinical trials and integration into an incubator by conforming to the medical devices directives. The study demonstrated the integration of IoMT-US for measuring respiration rate and respiratory signal. The US produced respiration rate readings compared well with the actual signal generator's settings of the platform that simulated chest movements.

Real Time Trajectory Modification Using a Closed Form Solution

1992 ◽  
Author(s):  
Michael R. Hummels ◽  
Raymond J. Cipra
Keyword(s):  
Closed Form ◽  
Real Time ◽  
Closed Form Solution ◽  
Form Solution ◽  
Time Interval ◽  
Efficient Manner ◽  
Planning Strategy ◽  
Higher Derivatives ◽  
On Line ◽  
Line Trajectory

Abstract An on-line trajectory modification and path planning strategy is developed which will allow a robot to respond in an efficient manner to real time sensory input. The approach developed here eliminates the need for solving many equations by developing a closed form algorithm. It uses two fourth order curves for the transition phases with a constant velocity section in between. Although this is done by providing additional constraints to the curve, it makes the problem of determining the trajectory much easier to solve, while providing continuous higher derivatives. It also provides a safe and efficient way of modifying trajectories based on the robots joint rate limits, joint acceleration limits, jerk limits, and desired time interval between trajectory modifications for a 4-1-4 trajectory. This method involves the solution of one second order equation and is directed toward real time applications.

scholarly journals Local Market for TSO and DSO Reactive Power Provision Using DSO Grid Resources

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3442
Author(s):  
Fábio Retorta ◽  
João Aguiar ◽  
Igor Rezende ◽  
José Villar ◽  
Bernardo Silva
Keyword(s):  
Real Time ◽  
Distribution System ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Reactive Power ◽  
Time Interval ◽  
Local Market ◽  
Distribution Grid ◽  
Power Profile ◽  
System Operator

This paper proposes a near to real-time local market to provide reactive power to the transmission system operator (TSO), using the resources connected to a distribution grid managed by a distribution system operator (DSO). The TSO publishes a requested reactive power profile at the TSO-DSO interface for each time-interval of the next delivery period, so that market agents (managing resources of the distribution grid) can prepare and send their bids accordingly. DSO resources are the first to be mobilized, and the remaining residual reactive power is supplied by the reactive power flexibility offered in the local reactive market. Complex bids (with non-curtailability conditions) are supported to provide flexible ways of bidding fewer flexible assets (such as capacitor banks). An alternating current (AC) optimal power flow (OPF) is used to clear the bids by maximizing the social welfare to supply the TSO required reactive power profile, subject to the DSO grid constraints. A rolling window mechanism allows a continuous dispatching of reactive power, and the possibility of adapting assigned schedules to real time constraints. A simplified TSO-DSO cost assignment of the flexible reactive power used is proposed to share for settlement purposes.

A Real-Time DSPI System for Measuring Surface Deformation in Clamped Bolted Joints

2008 ◽  
Author(s):  
Aidong Meng ◽  
Sayed A. Nassar
Keyword(s):  
Real Time ◽  
Vibration Isolation ◽  
Surface Deformation ◽  
Plane Surface ◽  
Speckle Pattern ◽  
The Real ◽  
Time Deformation ◽  
Out Of Plane ◽  
Phase Data ◽  
Set Up

A Digital Speckle Pattern Interferometry (DSPI) system is developed for the real-time measuring and monitoring the out-of-plane surface deformation around tightened threaded fasteners that are used to clamp bolted assemblies. Spatial phase shifting is employed to quantitatively determine the distribution of phase data by introducing a spatial carrier fringe pattern to the speckle interferogram. This is achieved by leading the object and reference beams to two separate apertures. The configuration is also suitable for collecting the real-time deformation during bolt tightening. The experimental DSPI system is set-up with optical components on a vibration-isolation table. A Matlab software is developed for the image acquisition and phase data calculation, which yields the out-of-plane surface deformation caused by the bolt preload. An aluminum joint is used with an M12 steel fastener. For miniature screw application, however, a plastic joint is used for collecting data.

Sign in / Sign up

Export Citation Format

Share Document