Diagenesis of Palaeozoic-Mesozoic Tethys Ocean Carbonate succession- Oman Mountains

This paper studies the uppermost unit of Kharus Formation (Cambrian) and the Autochthonous Akhdar Group (Permian-Triassic), which unconformably covers the pre-Permian strata. The petrographic and geochemical as well as field observations indicate that the succession underwent different stages of dolomitization that produced rocks inheriting the original host rock textures and structures (fabric-preserving dolomitization) and rocks with complete obliteration of the pre-existing textures (fabric-destroying dolomitization). Dolomites that retain the original fabric of the limestone are indicators of the host rock mineralogy, i.e., whether it was made up of high Mg-calcite or aragonitic allochems and indicate early dolomitization. The top part of the Kharus Formation consists of pervasively dolomitized units, whereas dolomites belonging to the Autochthonous Akhdar Group display variable degrees of structural and textural preservation. The evidence suggests very early dolomitization in a relatively short time interval for the Permian-Triassic carbonates. The preserved depositional features in the Permian-Triassic carbonates indicate deposition in shallow marine environments with variable energy levels. Seven facies are inferred: stromatolites, mudstones, wackestones, intraformational breccias, grainstones, packstones and grain/packstones. Petrographic as well as field observations exclude evidence of evaporites within Palaeozoic-Mesozoic rocks. Five paragenetic phases are determined to explain the type of dolomitization and to indicate the type and severity of diagenesis that affected the Palaeozoic-Mesozoic Tethys Ocean carbonates from the Oman Mountains.

FEM Analysis of Textile Reinforced Composite Materials Impact Behavior

Composite materials reinforced with textile fabrics represent a complex subject. When explaining these materials, one must consider their mechanical behavior in general, and impact resistance in particular, as many applications are characterized by dynamic strains. Impact characteristics must be considered from the early stages of the design process in order to be controlled through structure, layer deposition and direction. Reinforcement materials are essential for the quality and behavior of composites, and textile reinforcements present a large range of advantages. It takes a good understanding of the requirements specific to an application to accurately design textile reinforcements. Currently, simulations of textile reinforcements and composites are efficient tools to forecast their behavior during both processing and use. The paper presents the steps that must be followed for modelling the impact behavior of composite materials, using finite element analysis (FEM). The FEM model built using Deform 3D software offers information concerning the behavior structure during impact. The behavior can be visualized for the structure as a whole and, for different sections, be considered significant. Furthermore, the structure’s strain can be visualized at any moment. In real impact tests, this is not possible due to the very short time interval and the impossibility to record inside the structure, as well as to record all significant stages using conventional means.

Sympathetic Filament Eruptions within a Fan-spine Magnetic System

It is unclear whether successive filament eruptions at different sites within a short time interval are physically connected or not. Here, we present the observations of successive eruptions of a small and a large filament in a tripolar magnetic field region whose coronal magnetic field showed as a fan-spine magnetic system. By analyzing the multiwavelength observations taken by the Solar Dynamic Observatory and the extrapolated three-dimensional coronal magnetic field, we find that the two filaments resided respectively in the two lobes that make up the inner fan structure of the fan-spine magnetic system. In addition, a small fan-spine system was also revealed by the squashing factor Q map, which located in the east lobe of the fan structure of the large fan-spine system. The eruption of the small filament was a failed filament eruption, which did not cause any coronal mass ejection (CME) except for three flare ribbons and two post-flare-loop systems connecting the three magnetic polarities. The eruption of the large filament not only caused similar post-flare-loop systems and flare ribbons, as observed in the small filament eruption, but also a large-scale CME. Based on our analysis results, we conclude that the two successive filament eruptions were physically connected, in which the topology change caused by the small filament eruption is thought to be the physical linkage. In addition, the eruption of the small fan-spine structure further accelerated the instability and violent eruption of the large filament.

Effects of gas adsorbed on solid surface during gas breakdown in electron cyclotron resonance discharge

The microwave breakdown power (Pwb) in an ECR plasma source was not merely determined by pressure (gas flow rate), but found to vary with the time interval between two successive breakdowns. The measured Pwb dropped rapidly from a high value at a short time interval to a low level at a long time interval. The obtained dependence of Pwb on pressure (gas flow rate) exhibited distinct features: the normal monotonicity and abnormal non-monotonicity at the short and long time intervals, respectively. The effective zone in the antenna’s surface bombarded by hot electrons heated in the ECR layer was validated by (1) masking the antenna with a film having a variable radius; (2) calculating the distribution of the vertical component of the microwave electric field with respect to the static magnetic field; (3) imaging glows of transient breakdown discharges with a fast camera. The reduction in Pwb was mainly attributed to the enhanced emission of δ-electrons from the gas-adsorbed antenna under the bombardment of energetic electrons coming from the ECR layer.. The correlation between the dynamic gas coverage and the coefficient emission of δ-electrons was established to understand the abnormal ECR breakdown features.

External calibrator in global signal experiment for detection of the epoch of reionization

We present a conceptual design study of external calibrators in the 21 cm experiment towards detecting the globally averaged radiation of the epoch of reionization (EoR). Employment of external calibrator instead of internal calibrator commonly used in current EoR experiments allows removing instrumental effects such as beam pattern, receiver gain and instability of the system if the conventional three-position switch measurements are implemented in a short time interval. Furthermore, in the new design the antenna system is placed in an underground anechoic chamber with an open/closing ceiling to maximally reduce the environmental effect such as RFI and ground radiation/reflection. It appears that three of the four external calibrators proposed in this paper, including two indoor artificial transmitters and one outdoor celestial radiation (the Galactic polarization), fail to meet our purpose. Diurnal motion of the Galactic diffuse emission turns out to be the most probable source as an external calibrator, for which we have discussed the observational strategy and the algorithm of extracting the EoR signal.

Optimal Liquidity-Based Trading Tactics

We consider an agent who needs to buy (or sell) a relatively small amount of assets over some fixed short time interval. We work at the highest frequency meaning that we wish to find the optimal tactic to execute our quantity using limit orders, market orders, and cancellations. To solve the agent’s control problem, we build an order book model and optimize an expected utility function based on our price impact. We derive the equations satisfied by the optimal strategy and solve them numerically. Moreover, we show that our optimal tactic enables us to outperform significantly naive execution strategies.

Keypoints to Successful Newborn Hearing Screening. Thirty Years of Experience and Innovations

Congenital deafness is a major pediatric problem, affecting about 1.5–3 per 1000 newborns. The early treatment through cochlear implantation and auditory rehabilitation has been a historic milestone. Early diagnosis of congenital deafness is an essential requirement to obtain the best results, which is achieved through neonatal screening, a diagnostic practice that we began systematically at the Hospital Clínico in Valencia (Spain) 30 years ago. Neonatal hearing screening is successful in most developed countries. Its implementation has been slow due to the multiple difficulties that its universal application entails since it involves several health professionals and must be carried out, in a short time interval after birth. In addition, it must have a good performance that prevents the overload of other services and that requires experience and continuous adjustments in search of proper protocols. The aim of this review is to shed some light on some key points of neonatal hearing screening, highlighting our experience in the solutions to common problems. We will discuss about techniques, protocols and neonatal or nutritional factors that can influence the screening results. To a summary of our work, an update on the subject is provided with the intention of sharing experiences and facilitating the start-up of the new units.

PREDICTORS OF SMALL BUSINESS DIVERSIFICATION

The article discusses the features of diversification of small businesses, discloses its advantages for solving the problem of rationalizing activities. The factors of production and economic activity of the enterprise are considered, which are predictors of diversification and can be used in management as indicators. Diversification of the enterprise is one of the main ways of successful survival of business entities in the modern realities of competition. Nowadays, many organizations are successfully diversifying their activities, flexibly adapting to market conditions and increasing their financial well-being. The algorithm of the process of implementing the related diversification of the production activity of a small enterprise is given. The process of diversification of activities is highly costly, and for small enterprises, a related form of diversification aimed at expanding the range of products is promising. It is scientifically substantiated that this form of diversification is less risky, and requires the involvement of fewer resources of a small enterprise, at the same time, it provides an increase in the effectiveness of activities in a relatively short time interval.