Nowcasting solar irradiance for effective solar power plants operation and smart grid management

Author(s):  
Marius Paulescu ◽  
Eugenia Paulescu ◽  
Viorel Badescu
2019 ◽  
Vol 9 (6) ◽  
pp. 1131 ◽  
Author(s):  
Luis Valentín ◽  
Manuel Peña-Cruz ◽  
Daniela Moctezuma ◽  
Cesar Peña-Martínez ◽  
Carlos Pineda-Arellano ◽  
...  

Solar resource assessment is fundamental to reduce the risk in selecting the solar power-plants’ location; also for designing the appropriate solar-energy conversion technology and operating new sources of solar-power generation. Having a reliable methodology for solar irradiance forecasting allows accurately identifying variations in the plant energy production and, as a consequence, determining improvements in energy supply strategies. A new trend for solar resource assessment is based on the analysis of the sky dynamics by processing a set of images of the sky dome. In this paper, a methodology for processing the sky dome images to obtain the position of the Sun is presented; this parameter is relevant to compute the solar irradiance implemented in solar resource assessment. This methodology is based on the implementation of several techniques in order to achieve a combined, fast, and robust detection system for the Sun position regardless of the conditions of the sky, which is a complex task due to the variability of the sky dynamics. Identifying the correct position of the Sun is a critical parameter to project whether, in the presence of clouds, the occlusion of the Sun is occurring, which is essential in short-term solar resource assessment, the so-called irradiance nowcasting. The experimental results confirm that the proposed methodology performs well in the detection of the position of the Sun not only in a clear-sky day, but also in a cloudy one. The proposed methodology is also a reliable tool to cover the dynamics of the sky.


Author(s):  
Rodrigo Alonso-Suarez ◽  
Franco Marchesoni ◽  
Liber Dovat ◽  
Agustin Laguarda

2020 ◽  
Vol 7 (2) ◽  
pp. 66-70
Author(s):  
Mukhamad Angga Gumilang ◽  
Hariyono Rakhmad

Utilization of solar cells can be used as a source of residential energy as a backup power source other than relying on supplies from PLN. In previous studies have not developed a system that monitors the power obtained from the utilization of solar cells. As a power monitoring tool a microcontroller and Internet-based (IOT) device is needed to provide information on the availability of backup power in the installation of solar power plants in homes. In this research, a PLTS design that is equipped with an IOT-based power monitoring system uses Arduino Uno and Thinkspeak. The results of the design can be applied to real conditions for the installation of solar power plants for residential homes.


2021 ◽  
Vol 1125 (1) ◽  
pp. 012074
Author(s):  
J Koko ◽  
A Riza ◽  
U K Mohamad Khadik

Author(s):  
Bashria A A Yousef ◽  
Ahmed A Hachicha ◽  
Ivette Rodriguez ◽  
Mohammad Ali Abdelkareem ◽  
Abrar Inyaat

Abstract Integration concept of energy resources can complement between the competing energy technologies. This manuscript presents a comprehensive review on the state-of-the-art of concentrated solar power (CSP) integration technology with various energy sources. Compared to CSP alone, integration of CSP and fossil fuel provides promising solution to solar energy intermittence, emissions and installation cost reduction, with 25% increase in electric power generation. On the other hand, integration of CSP with other sources such as geothermal and biomass can supply dispatchable power with almost zero emissions. The electricity produced via integrated CSP and photovoltaic (PV) has better power quality and less cost compared to that produced by PV alone or CSP alone, respectively. Integration of CSP and wind energy can meet peak demand, reduce power fluctuation and provide electrical power at a high capacity factor. However, the lack of reliable biomass, geothermal and wind data with the solar availability at specific locations is the main obstacle for the acceptance and further deployment of hybridization systems. The advantages and limitations of the hybrid technologies presented in this paper according to the literature are reviewed. Moreover, future directions of CSP such as production of hydrogen, solid particles receivers and the integration of supercritical carbon dioxide cycle are also discussed.


Sign in / Sign up

Export Citation Format

Share Document