Modeling of a high-performance three-phase voltage-source boost inverter with the implementation of closed-loop control

2021 ◽  
pp. 211-233
Author(s):  
P. Arvind ◽  
Sourav Chakraborty ◽  
Deepak Kumar ◽  
P.R. Thakura
2013 ◽  
Vol 321-324 ◽  
pp. 917-920
Author(s):  
Guang Ya Liu ◽  
Xiao Song Li

Three-phase voltage source PWM rectifier generally adopts double closed loop control system. According to the high frequency characteristic of three-phase voltage source PWM rectifier, this paper put forward the setting method of current inner ring regulator and voltage outer ring regulator PI parameter. Finally, it is verified by simulation.


Permanent magnet synchronous machines have been universally used over induction machines in variable speed drives. For present trends and future developments, power electronics technology gives the extensive research of multilevel inverters that brings high safety voltages with low harmonic content in comparison with two-level inverter strategies. Multi level inverters implementation can be done by raising the number of power semi conductor controlled switching devices per phase to increase the number of inverter output voltage levels. By increasing the levels, power controlled switching devices and other components are increased, which makes the inverter complex and overpriced. From the above aspects, three-phase three-level inverter strategy is used for high performance and high voltage A.C drives. Multilevel inverter using a space vector pulse width modulation (SVPWM) strategy gives great advantages in high performance A.C drive applications. Various types of control strategies have been recommended for voltage source inverter fed A.C drives. In the proposed work, a PI controller is designed for the outer loop and non-linear controller using a state feedback linearization technique is designed for the inner loop. The closed loop control system for three-level inverter fed Permanent magnet synchronous motor drive employing SVPWM is extensively simulated using MATLAB.


Author(s):  
H.V.Gururaja Rao ◽  
Karuna Mudliyar ◽  
R.C. Mala

<table width="593" border="1" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" width="387"><p>Renewable energy sources are increasingly being used today and solar energy is the most readily and abundantly available energy source. Boost converters are an integral part of any solar energy system. In order to obtain maximum possible energy from the solar system multi-phase interleaved boost converters are used. This paper presents the small-signal ac modelling and closed loop control of three-phase interleaved boost converter. State–space modelling methodology has been adopted to have linearized equivalent model of the boost converter. The interleaved three-phase boost converter is averaged over its one switching period and perturbed with small ac variations and finally linearized around its quiescent point to have a small signal ac model.  Type III compensator is employed to improve the frequency response and closed loop control of three-phase boost converter. The controller design procedure is discussed in detail. The effect of right-half plane zero in non-minimum phase system and the appropriate pole-zero placements to overcome the maximum phase lag in such system is discussed. The compensated closed loop system is tested for load variations to observe the transient response.</p><p> </p></td></tr></tbody></table>


Sign in / Sign up

Export Citation Format

Share Document