Cellulose and starch nanoparticles: Function and surface modifications for biomedical application

2022 ◽  
pp. 615-664
Author(s):  
Evangelina Repetto ◽  
Carlos Rodriguez Ramirez ◽  
Verónica E. Manzano ◽  
Nancy Lis García ◽  
Norma B. D'Accorso
Author(s):  
George Price ◽  
Lizardo Cerezo

Ultrastructural defects of ciliary structure have been known to cause recurrent sino-respiratory infection concurrent with Kartagener's syndrome. (1,2,3) These defects are also known to cause infertility in both males and females. (4) Overall, the defects are defined as the Immotile, or Dyskinetic Cilia Syndrome (DCS). Several ultrastructural findings have been described, including decreased number of cilia, multidirection orientation, fused and compound cilia, membrane blebs, excess matrix in the axoneme, missing outer tubular doublets, translocated doublets, defective radial spokes and dynein arms. A rare but noteworthy ultrastructural finding in DCS is the predominance of microvilli-like structures on the luminal surface of the respiratory epithelium. (5,6) These permanent surface modifications of the apical respiratory epithelium no longer resemble cilia but reflect the ultrastructure of stereocilia, similar to that found in the epidydimal epithelium. Like microvilli, stereocilia are devoid of microtubular ultrastructure in comparison with true cilia.


1991 ◽  
Vol 223 ◽  
Author(s):  
Neeta Agrawal ◽  
R. D. Tarey ◽  
K. L. Chopra

ABSTRACTArgon plasma exposure has been used to induce surface chemical modification of aluminium thin films, causing a drastic change in etch rate in standard HNO3/CH3COOH/H3PO4 etchant. The inhibition period was found to increase with power and Ar plasma exposure time. Auger electron and x-ray photoelectron spectroscopies have indicated formation of an aluminium fluoride (AlF3) surface layer due to fluorine contamination originating from the residue left in the plasma chamber during CF4 processing. The high etch selectivity between unexposed and argon plasma exposed regions has been exploited as a new technique for resistless patterning of aluminium.


2000 ◽  
Vol 28 (3-4) ◽  
pp. 481-485 ◽  
Author(s):  
Alessandro Mantini ◽  
Corrado Di Natale ◽  
Antonella Macagnano ◽  
Roberto Paolesse ◽  
Alessandro Finazzi-Agro ◽  
...  

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Hemalatha D ◽  
Saraswath S

In material science, green method for synthesis of nanomaterials is feasible, cheaper and eco-friendly protocol. To accomplish this phenomenon, present study was aimed to synthesize Copper oxide nanoparticles using leaf extract of Aloevera with two different precursors CuCl2.2H2O (Cupric chloride) and CuSo4.5H2O (Cupric sulfate). The extraction of Aloevera is employed as reducing and stabilizing agent for this synthesis.Copper oxide Nanoparticles is effective use of biomedical application due to their antibacterial function. The synthesized Copper oxide nanoparticles were characterized by X-Ray Diffraction Spectroscopy (XRD), Energy Dispersive Spectroscopy (EDX), FourierTransform Infrared Spectroscopy (FT- IR) and Scanning Electron Microscope(SEM). XRD studies reveal the crystallographic nature of Copper oxide nanoparticles. Furthermore the Copper oxide nanoparticles have good Antibacterial activity against both gram negative (E.Coli, Klebsiella pneumonia) and gram positive (Bacillus cereus, Staphylococcus aureus)bacteria.


2009 ◽  
Vol 36 (11) ◽  
pp. 1402-1407 ◽  
Author(s):  
Mei LIU ◽  
Pei-Hui YANG ◽  
Ji-Ye CAI

Sign in / Sign up

Export Citation Format

Share Document