Ferrocene-Containing Polymers as Electron Transfer Mediators in Carbon Paste Electrodes Modified with PQQ-dependent Aldose Dehydrogenase

In this work, new Screen Printed Carbon-paste Electrodes (SPCEs) were developed through deposition of nanostructures of HO–BiONO3 synthesized with or without surfactant additions. We performed a cyclic voltammetry study showing the improvement in performance of bismuth tailored electrodes for paracetamol sensing compared with bare SPCE. A computation study was also performed for investigating the interaction between paracetamol and bismuth species during the electron transfer process enlighten the preferential sites of interaction on the surface of modified SPEs.

Download Full-text

Amperometric glucose biosensors based on an osmium (2+/3+) redox polymer-mediated electron transfer at carbon paste electrodes

Electroanalysis ◽

10.1002/elan.1140070704 ◽

1995 ◽

Vol 7 (7) ◽

pp. 619-625 ◽

Cited By ~ 22

Author(s):

Miloslav Pravda ◽

Olubunmi Adeyoju ◽

Emmanuel I. Iwuoha ◽

Johannes G. Vos ◽

Malcolm R. Smyth ◽

...

Keyword(s):

Electron Transfer ◽

Carbon Paste ◽

Redox Polymer ◽

Glucose Biosensors ◽

Carbon Paste Electrodes ◽

Mediated Electron Transfer ◽

Amperometric Glucose Biosensors

Download Full-text

Why is the electroanalytical performance of carbon paste electrodes involving an ionic liquid binder higher than paraffinic binders? A simulation investigation

Physical Chemistry Chemical Physics ◽

10.1039/c5cp02683k ◽

2015 ◽

Vol 17 (38) ◽

pp. 24722-24731 ◽

Cited By ~ 2

Author(s):

M. H. Ghatee ◽

S. Namvar ◽

A. R. Zolghadr ◽

F. Moosavi

Keyword(s):

Electron Transfer ◽

Ionic Liquid ◽

Transfer Rate ◽

Carbon Paste ◽

Electron Transfer Rate ◽

Carbon Paste Electrodes

Ionic liquid preferentially leaves the graphite edge-plane uncovered when used as a binder in the fabrication of carbon-paste electrodes, enhancing the electron transfer rate.

Download Full-text

Influence of Nitrogen-Doped Carbon Dot and Silver Nanoparticle Modified Carbon Paste Electrodes on the Potentiometric Determination of Tobramycin Sulfate: A Comparative Study

Chemosensors ◽

10.3390/chemosensors9030052 ◽

2021 ◽

Vol 9 (3) ◽

pp. 52

Author(s):

Nermine V. Fares ◽

Passant M. Medhat ◽

Christine M. El Maraghy ◽

Sherif Okeil ◽

Miriam F. Ayad

Keyword(s):

Silver Nanoparticle ◽

Carbon Nanodots ◽

Carbon Paste ◽

X Ray Diffraction ◽

Loteprednol Etabonate ◽

Carbon Paste Electrodes ◽

Transmission Electron ◽

Nernstian Slope ◽

Nitrogen Doped Carbon ◽

Modified Carbon Paste Electrodes

Two inexpensive and simple methods for synthesis of carbon nanodots were applied and compared to each other, namely a hydrothermal and microwave-assisted method. The synthesized carbon nanodots were characterized using transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis), photoluminescence (PL), Fourier transform-infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The synthesized microwave carbon nanodots had smaller particle size and were thus chosen for better electrochemical performance. Therefore, they were used for our modification process. The proposed electrodes performance characteristics were evaluated according to the IUPAC guidelines, showing linear response in the concentration range 10−6–10−2, 10−7–10−2, and 10−8–10−2 M of tobramycin with a Nernstian slope of 52.60, 58.34, and 57.32 mV/decade for the bare, silver nanoparticle and carbon nanodots modified carbon paste electrodes, respectively. This developed potentiometric method was used for quantification of tobramycin in its co-formulated dosage form and spiked human plasma with good recovery percentages and without interference of the co-formulated drug loteprednol etabonate and excipients.

Download Full-text

Polyvinyl Chloride Modified Carbon Paste Electrodes for Sensitive Determination of Levofloxacin Drug in Serum, Urine, and Pharmaceutical Formulations

Sensors ◽

10.3390/s21093150 ◽

2021 ◽

Vol 21 (9) ◽

pp. 3150

Author(s):

Fatehy M. Abdel-Haleem ◽

Sonia Mahmoud ◽

Nour Eldin T. Abdel-Ghani ◽

Rasha Mohamed El Nashar ◽

Mikhael Bechelany ◽

...

Keyword(s):

Bacterial Infections ◽

Pharmaceutical Preparation ◽

Pharmaceutical Formulations ◽

Selectivity Coefficient ◽

Pvc Membrane ◽

Carbon Paste ◽

Serum Samples ◽

Carbon Paste Electrodes ◽

Antibiotic Drug

Levofloxacin (LF) is a medically important antibiotic drug that is used to treat a variety of bacterial infections. In this study, three highly sensitive and selective carbon paste electrodes (CPEs) were fabricated for potentiometric determination of the LF drug: (i) CPEs filled with carbon paste (referred to as CPE); (ii) CPE coated (drop-casted) with ion-selective PVC membrane (referred to as C-CPE); (iii) CPE filled with carbon paste modified with a plasticizer (PVC/cyclohexanone) (referenced as P-CPE). The CPE was formulated from graphite (Gr, 44.0%) and reduced graphene oxide (rGO, 3.0%) as the carbon source, tricresyl phosphate (TCP, 47.0%) as the plasticizer; sodium tetrakis[3,5-bis(trifluoromethyl)phenyl] borate (St-TFPMB, 1.0%) as the ion exchanger; and levofloxacinium-tetraphenylborate (LF-TPB, 5.0%) as the lipophilic ion pair. It showed a sub-Nernstian slope of 49.3 mV decade−1 within the LF concentration range 1.0 × 10−2 M to 1.0 × 10−5 M, with a detection limit of 1.0 × 10−5 M. The PVC coated electrode (C-CPE) showed improved sensitivity (in terms of slope, equal to 50.2 mV decade−1) compared to CPEs. After the incorporation of PVC paste on the modified CPE (P-CPE), the sensitivity increased at 53.5 mV decade−1, indicating such improvement. The selectivity coefficient (log KLF2+,Fe+3pot.) against different interfering species (Na+, K+, NH4+, Ca2+, Al3+, Fe3+, Glycine, Glucose, Maltose, Lactose) were significantly improved by one to three orders of magnitudes in the case of C-CPE and P-CPE, compared to CPEs. The modification with the PVC membrane coating significantly improved the response time and solubility of the LF-TPB within the electrode matrix and increased the lifetime. The constructed sensors were successfully applied for LF determination in pharmaceutical preparation (Levoxin® 500 mg), spiked urine, and serum samples with high accuracy and precision.

Download Full-text