Biocompatibility analysis of PLA based candidate materials for cardiovascular stents in a rat subcutaneous implant model

2020 ◽  
Vol 122 (7) ◽  
pp. 151615
Author(s):  
Ramya Ahuja ◽  
Nisha Kumari ◽  
Alok Srivastava ◽  
Pooja Bhati ◽  
Priya Vashisth ◽  
...  
Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 77
Author(s):  
Enric Casanova-Batlle ◽  
Antonio J. Guerra ◽  
Joaquim Ciurana

Bioresorbable cardiovascular applications are increasing in demand as fixed medical devices cause episodes of late restenosis. The autologous treatment is, so far, the gold standard for vascular grafts due to the similarities to the replaced tissue. Thus, the possibility of customizing each application to its end user is ideal for treating pathologies within a dynamic system that receives constant stimuli, such as the cardiovascular system. Direct Ink Writing (DIW) is increasingly utilized for biomedical purposes because it can create composite bioinks by combining polymers and materials from other domains to create DIW-printable materials that provide characteristics of interest, such as anticoagulation, mechanical resistance, or radiopacity. In addition, bioinks can be tailored to encounter the optimal rheological properties for the DIW purpose. This review delves into a novel emerging field of cardiovascular medical applications, where this technology is applied in the tubular 3D printing approach. Cardiovascular stents and vascular grafts manufactured with this new technology are reviewed. The advantages and limitations of blending inks with cells, composite materials, or drugs are highlighted. Furthermore, the printing parameters and the different possibilities of designing these medical applications have been explored.


2010 ◽  
Vol 103 (1) ◽  
pp. 84-86 ◽  
Author(s):  
Jonathan M. Ricker ◽  
William F. Foody ◽  
Nathan M. Shumway ◽  
Janet C. Shaw

2006 ◽  
Vol 80A (4) ◽  
pp. 861-873 ◽  
Author(s):  
Chun‐Che Shih ◽  
Chun‐Ming Shih ◽  
Kuang‐Yi Chou ◽  
Shing‐Jong Lin ◽  
Yea‐Yang Su

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 566
Author(s):  
Pham Hong Quan ◽  
Iulian Antoniac ◽  
Florin Miculescu ◽  
Aurora Antoniac ◽  
Veronica Manescu (Păltânea) ◽  
...  

Fluoride conversion coatings on Mg present many advantages, among which one can find the reduction of the corrosion rate under “in vivo” or “in vitro” conditions and the promotion of the calcium phosphate deposition. Moreover, the fluoride ions released from MgF2 do not present cytotoxic effects and inhibit the biofilm formation, and thus these treated alloys are very suitable for cardiovascular stents and biodegradable orthopedic implants. In this paper, the biodegradation behavior of four new magnesium biodegradable alloys that have been developed in the laboratory conditions, before and after surface modifications by fluoride conversion (and sandblasting) coatings, are analyzed. We performed structural and surface analysis (XRD, SEM, contact angle) before and after applying different surface treatments. Furthermore, we studied the electrochemical behavior and biodegradation of all experimental samples after immersion test performed in NaCl solution. For a better evaluation, we also used LM and SEM for evaluation of the corroded samples after immersion test. The results showed an improved corrosion resistance for HF treated alloy in the NaCl solution. The chemical composition, uniformity, thickness and stability of the layers generated on the surface of the alloys significantly influence their corrosion behavior. Our study reveals that HF treatment is a beneficial way to improve the biofunctional properties required for the studied magnesium alloys to be used as biomaterials for manufacturing the orthopedic implants.


2017 ◽  
Vol 9 (1) ◽  
pp. 56
Author(s):  
A.D. Kruchinina ◽  
O.D. Lyubchenko ◽  
Y.P. Yastremskaya ◽  
A.N. Shatrov

2009 ◽  
Vol 54 (No. 2) ◽  
pp. 89-95 ◽  
Author(s):  
A. Prohaczik ◽  
M. Kulcsar ◽  
Gy. Huszenicza

Hyperoestrogenism causing progressive alopecia in neutered ferrets may be induced by ovarian remnant syndrome (ORS) and nodular hyperplasia of the adrenocortex (hyperadrenocorticism, NHA). The objective of the study was to determine whether a slow-release implant of a gonadotropin releasing hormone (GnRH) analogue, deslorelin, has any value in therapy of hyperoestrogenism of adrenocortical origin (NHA). Three supposed cases of NHA with alopecia and other clinical signs of hyperoestrogenism (<i>n</i> = 2 spayed females in oestrous and <i>n</i> = 1 castrated male) were treated with a subcutaneous implant of 4.7 mg deslorelin acetate. Blood samples were collected, and plasma levels of estradiol (E<sub>2</sub>) were determined just before, and some weeks after treatment. For realistic monitoring, blood samples for E<sub>2</sub> determination were also taken from intact, healthy (untreated control) females after the beginning of heat (<i>n</i> = 5), or 9–21 days after, with hCG induced ovulation (<i>n</i> = 6), or out of breeding season (<i>n</i> = 3). Before treatment, all three alopecic ferrets showed elevated E<sub>2</sub> concentrations (99.45–139.9 pmol/l) similar to the untreated control females in oestrous (61.6–123.02 pmol/l) (<i>P</i> = 0.229). Some weeks after the deslorelin administration, the hair of these ferrets began to grow again and the elevated E<sub>2</sub> concentrations significantly decreased compared to the pre-treatment values (<i>P</i> = 0.035). E2 concentrations reached the basal level (12.89–16.08 pmol/l) typical for that of the untreated control females in anoestrus or in luteal phase (12.0–30.58 pmol/l) (<i>P</i> = 0.137). All treated ferrets were examined again 19–21 months after implant insertion (the implant still being present) and all of them had normal hair and were clinically healthy. These observations prove that deslorelin can suppress the E<sub>2</sub> production of NHA, and is therefore a useful tool in the therapy of hormonal alopecia neutered ferrets.


2011 ◽  
Vol 112 (12) ◽  
pp. 3762-3772 ◽  
Author(s):  
Sarah M. McDonald ◽  
Loren A. Matheson ◽  
Joanne E. McBane ◽  
Drew Kuraitis ◽  
Erik Suuronen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document