Iridium substitution in nickel cobaltite renders high mass specific OER activity and durability in acidic media

2019 ◽  
Vol 244 ◽  
pp. 295-302 ◽  
Author(s):  
Waqas Qamar Zaman ◽  
Wei Sun ◽  
Muhammad Tariq ◽  
Zhenhua Zhou ◽  
Usman Farooq ◽  
...  
Keyword(s):  
High Mass ◽  
Acidic Media ◽  
Nickel Cobaltite

Enhanced Ion Transport in an Ether Aided Super Concentrated Ionic Liquid Electrolyte for Long-Life Practical Lithium Metal Battery Applications

2020 ◽  
Author(s):  
Urbi Pal ◽  
Fangfang Chen ◽  
Derick Gyabang ◽  
Thushan Pathirana ◽  
Binayak Roy ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ion Transport ◽  
Current Density ◽  
Coulombic Efficiency ◽  
High Energy ◽  
Liquid Electrolyte ◽  
High Mass ◽  
Lithium Metal ◽  
Ionic Liquid Electrolyte ◽  
Lithium Metal Battery

We explore a novel ether aided superconcentrated ionic liquid electrolyte; a combination of ionic liquid, <i>N</i>-propyl-<i>N</i>-methylpyrrolidinium bis(fluorosulfonyl)imide (C<sub>3</sub>mpyrFSI) and ether solvent, <i>1,2</i> dimethoxy ethane (DME) with 3.2 mol/kg LiFSI salt, which offers an alternative ion-transport mechanism and improves the overall fluidity of the electrolyte. The molecular dynamics (MD) study reveals that the coordination environment of lithium in the ether aided ionic liquid system offers a coexistence of both the ether DME and FSI anion simultaneously and the absence of ‘free’, uncoordinated DME solvent. These structures lead to very fast kinetics and improved current density for lithium deposition-dissolution processes. Hence the electrolyte is used in a lithium metal battery against a high mass loading (~12 mg/cm<sup>2</sup>) LFP cathode which was cycled at a relatively high current rate of 1mA/cm<sup>2</sup> for 350 cycles without capacity fading and offered an overall coulombic efficiency of >99.8 %. Additionally, the rate performance demonstrated that this electrolyte is capable of passing current density as high as 7mA/cm<sup>2</sup> without any electrolytic decomposition and offers a superior capacity retention. We have also demonstrated an ‘anode free’ LFP-Cu cell which was cycled over 50 cycles and achieved an average coulombic efficiency of 98.74%. The coordination chemistry and (electro)chemical understanding as well as the excellent cycling stability collectively leads toward a breakthrough in realizing the practical applicability of this ether aided ionic liquid electrolytes in lithium metal battery applications, while delivering high energy density in a prototype cell.

Analysis of nonsteroidal anti-inflammatory drugs by using microfluidic techniques: a review

2020 ◽  
Vol 16 ◽  
Author(s):  
Chiara Fanali ◽  
Giovanni D’Orazio ◽  
Alessandra Gentili ◽  
Salvatore Fanali
Keyword(s):  
Stationary Phases ◽  
Low Flow ◽  
High Mass ◽  
Internal Diameter ◽  
Uv Detectors ◽  
On Line ◽  
Inflammatory Drugs ◽  
Anti Inflammatory ◽  
Silica Phases ◽  
Liquid Chromatographic

: In this review paper, miniaturized techniques, including both electromigration and liquid chromatographic ones, have been considered discussing their main features in the analytical field for the separation and analysis of nonsteroidal anti-inflammatory drugs (NSAIDs). In capillary electrophoresis (CE) and nano-liquid chromatography (nano-LC), separation are performed in capillaries with internal diameter (I.D.) lower than 100 m and therefore flow rates in the range 100- 1000 nL/min are applied. Therefore due to the low flow rate, high mass sensitivity can be obtained. Usually conventional UV detectors are used on-line; however these techniques can be coupled with mass spectrometry (MS). CE and nano-LC have been also applied to the separation of NSAIDs using silica stationary phases (SP) modified with C18 promoting interaction with analytes mainly based on hydrophobic interaction. In addition the use of chiral SP resulted effective for the chiral resolution of these compounds. In addition to silica phases, monolithic (both organic and inorganic) material has also been used. Although most of the presented studies aimed to demonstrate the usefulness of the considered microfluidic techniques, some applications to real samples have also been reported.

Efficient Micromixing for Continuous Biodiesel Production from Jatropha Oil

2018 ◽  
Vol 9 (1) ◽  
pp. 133-139
Author(s):  
Waleed S. Mohammed ◽  
Ahmed H. El-Shazly ◽  
Marwa F. Elkady ◽  
Masahiro Ohshima
Keyword(s):  
Methyl Esters ◽  
Continuous Process ◽  
Sol Gel ◽  
Average Diameter ◽  
Biodiesel Production ◽  
High Mass ◽  
Molar Ratio ◽  
Jatropha Oil ◽  
Energy Deficiency ◽  
Gel Preparation

Introduction: The utilization of biodiesel as an alternative fuel is turning out to be progressively famous these days because of worldwide energy deficiency. The enthusiasm for utilizing Jatropha as a non-edible oil feedstock is quickly developing. The performance of the base catalyzed methanolysis reaction could be improved by a continuous process through a microreactor in view of the high mass transfer coefficient of this technique. Materials & Methods: Nanozirconium tungstovanadate, which was synthetized using sol-gel preparation method, was utilized in a complementary step for biodiesel production process. The prepared material has an average diameter of 0.066 &µm. Results: First, the NaOH catalyzed methanolysis of Jatropha oil was investigated in a continuous microreactor, and the efficient mixing over different mixers and its impact on the biodiesel yield were studied under varied conditions. Second, the effect of adding the nanocatalyst as a second stage was investigated. Conclusion: The maximum percentage of produced methyl esters from Jatropha oil was 98.1% using a methanol/Jatropha oil molar ratio of 11 within 94 s using 1% NaOH at 60 &°C. The same maximum conversion ratio was recorded with the nanocatalyst via only 0.3% NaOH.

Mn-Mo-O Catalysts for Methanol Oxidation. I. Preparation and Characterization of the Catalysts

1992 ◽  
Vol 57 (12) ◽  
pp. 2529-2538 ◽  
Author(s):  
Krasimir Ivanov ◽  
Penka Litcheva ◽  
Dimitar Klissurski
Keyword(s):  
Methanol Oxidation ◽  
Solution Concentration ◽  
Alkaline Media ◽  
Acidic Media ◽  
Chemical Methods ◽  
X Ray ◽  
Ph Values ◽  
Precipitate Composition

Mn-Mo-O catalysts with a different Mo/Mn ratio have been prepared by precipitation. The precipitate composition as a function of solution concentration and pH was studied by X-ray, IR, thermal and chemical methods. Formation of manganese molybdates with MnMoO4.1.5H2O, Mn3Mo3O12.2.5H2O, and Mn3Mo4O15.4H2O composition has been supposed. It is concluded that pure MnMoO4 may be obtained in both acid and alkaline media, the pH values depending on the concentration of the initial solutions. The maximum Mo/Mn ratio in the precipitates is 1.33. The formation of pure Mn3Mo4O15.4H2O is possible in weakly acidic media. This process is favoured by increasing the concentration of initial solutions.

Sorption of Cadmium and Lead by Chelating Ion Exchangers Ostsorb OXIN, Ostsorb DETA, and Ostsorb DTTA

1994 ◽  
Vol 59 (6) ◽  
pp. 1311-1318 ◽  
Author(s):  
Ladislav Svoboda ◽  
Petr Vořechovský
Keyword(s):  
Ionic Strength ◽  
Aqueous Solutions ◽  
Sodium Perchlorate ◽  
Exchange Capacity ◽  
Chloride Ions ◽  
Point Of View ◽  
Alkaline Media ◽  
Ion Exchangers ◽  
Acidic Media ◽  
Cadmium And Lead

The properties of cellulose chelating ion exchangers Ostsorb have been studied in the sorption of cadmium and lead from aqueous solutions. The Cd(II) and Pb(II) ions are trapped by the Ostsorb OXIN and Ostsorb DETA ion exchangers most effectively in neutral and alkaline media but at these conditions formation of stable hydrolytic products of both metals competes with the exchange equilibria. From this point of view, Ostsorb DTTA appears to be a more suitable sorbent since it traps the Pb(II) and Cd(II) ions in acidic media already. Chloride ions interfere with the sorption of the two metals by Ostsorb DTTA whereas the ionic strength adjusted by the addition of sodium perchlorate does not affect the exchange capacity of this ion exchanger.

Sign in / Sign up

Export Citation Format

Share Document