Multiscale modelling of hybrid glass fibres reinforced graphene platelets polyamide PA6 matrix composites for crashworthiness applications

This research article investigated the notch sensitivity of two different glass fibre architectures, namely short and 2D plain-woven glass fibres reinforced with unsaturated polyester and epoxy matrix composites fabricated by the hand lay-up technique. This was carried out through open hole tension tests at different ratios of the specimen hole diameter to the specimen with three different values (0.1, 0.2, 0.5) compared to the unnotched specimen. The notch sensitivity of these composites was evaluated using the residual tensile strength by the application of Whitney–Nuismer Mathematical Model. The results showed that by using polyester matrix, the notch sensitivity of composites reinforced with plain-woven glass fibre is higher than that of short glass fibre at different D/W ratios. On the other hand, on testing epoxy matrixes, the notch sensitivity of composites reinforced with plain-woven glass fibre is lower than that of short glass fibre at different D/W ratios.

Download Full-text

Electron Microscopy of Metal-Matrix Composites

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069016 ◽

1970 ◽

Vol 28 ◽

pp. 404-405

Author(s):

A. Lawley ◽

M. R. Pinnel ◽

A. Pattnaik

Keyword(s):

Electron Microscopy ◽

Metal Matrix Composites ◽

Metal Matrix ◽

Critical Evaluation ◽

Elastic Behavior ◽

Matrix Composites ◽

Directionally Solidified ◽

Fracture Characteristics ◽

Broad Program

As part of a broad program on composite materials, the role of the interface on the micromechanics of deformation of metal-matrix composites is being studied. The approach is to correlate elastic behavior, micro and macroyielding, flow, and fracture behavior with associated structural detail (dislocation substructure, fracture characteristics) and stress-state. This provides an understanding of the mode of deformation from an atomistic viewpoint; a critical evaluation can then be made of existing models of composite behavior based on continuum mechanics. This paper covers the electron microscopy (transmission, fractography, scanning microscopy) of two distinct forms of composite material: conventional fiber-reinforced (aluminum-stainless steel) and directionally solidified eutectic alloys (aluminum-copper). In the former, the interface is in the form of a compound and/or solid solution whereas in directionally solidified alloys, the interface consists of a precise crystallographic boundary between the two constituents of the eutectic.

Download Full-text

TEM examination of 2014-SiC metal matrix composite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100105692 ◽

1988 ◽

Vol 46 ◽

pp. 726-727

Author(s):

M. G. Burke ◽

M. N. Gungor ◽

P. K. Liaw

Keyword(s):

Metal Matrix Composite ◽

Metal Matrix Composites ◽

Matrix Composite ◽

Metal Matrix ◽

Tensile Deformation ◽

Microstructural Characterization ◽

Thin Foil ◽

Matrix Alloy ◽

Matrix Composites ◽

Ion Milling

Aluminum-based metal matrix composites offer unique combinations of high specific strength and high stiffness. The improvement in strength and stiffness is related to the particulate reinforcement and the particular matrix alloy chosen. In this way, the metal matrix composite can be tailored for specific materials applications. The microstructural characterization of metal matrix composites is thus important in the development of these materials. In this study, the structure of a p/m 2014-SiC particulate metal matrix composite has been examined after extrusion and tensile deformation.Thin-foil specimens of the 2014-20 vol.% SiCp metal matrix composite were prepared by dimpling to approximately 35 μm prior to ion-milling using a Gatan Dual Ion Mill equipped with a cold stage. These samples were then examined in a Philips 400T TEM/STEM operated at 120 kV. Two material conditions were evaluated: after extrusion (80:1); and after tensile deformation at 250°C.

Download Full-text