Microwave-assisted preparation and adsorption performance of activated carbon from biodiesel industry solid reside: Influence of operational parameters

2012 ◽  
Vol 103 (1) ◽  
pp. 398-404 ◽  
Author(s):  
K.Y. Foo ◽  
B.H. Hameed
Keyword(s):  
Activated Carbon ◽  
Operational Parameters ◽  
Microwave Assisted ◽  
Adsorption Performance ◽  
Biodiesel Industry

Insights into the modeling, characterization and adsorption performance of mesoporous activated carbon from corn cob residue via microwave-assisted H3PO4 activation

2020 ◽  
Vol 21 ◽  
pp. 100688 ◽  
Author(s):  
Ali H. Jawad ◽  
Mondira Bardhan ◽  
Md. Atikul Islam ◽  
Md. Azharul Islam ◽  
Syed Shatir A. Syed-Hassan ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Corn Cob ◽  
Microwave Assisted ◽  
Adsorption Performance ◽  
Mesoporous Activated Carbon ◽  
H3po4 Activation

scholarly journals Adsorption of Cationic Methylene Blue Dye Using Microwave-Assisted Activated Carbon Derived from Acacia Wood: Optimization and Batch Studies

2021 ◽  
pp. 103122
Author(s):  
Mohamad Firdaus Mohamad Yusop ◽  
Mohd Azmier Ahmad ◽  
Nur Ayshah Rosli ◽  
Mohd Edeerozey Abd Manaf
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Batch Studies ◽  
Microwave Assisted

scholarly journals CHARACTERISTICS AND ADSORPTION PERFORMANCE OF FORMULATED TRIKOTAC FILTER AIDS

2019 ◽  
Vol 81 (3) ◽  
Author(s):  
N. Masdiana ◽  
M. Rashid ◽  
S. Hajar ◽  
M. R. Ammar
Keyword(s):  
Particle Size ◽  
Activated Carbon ◽  
Particle Density ◽  
Adsorption Properties ◽  
The Other ◽  
Bet Surface Area ◽  
Adsorption Performance ◽  
Filtration System ◽  
Filter Aids ◽  
The Relationship

TrikotAC filter aids is a combination of a pre-coating material PreKot™ with two adsorbents; activated carbon and lime and their characteristics were investigated in this study. TrikotAC was formulated into three different weight ratios of 5:1:94, 10:1:89 and 10:5:85, respectively. The relationship between adsorption properties and characteristics of the formulated materials particle size distribution, particle density, bulk density, and BET surface area were investigated. The results showed that the adsorption capacity for TrikotAC 10:5:85 (11.88 mg/g) was higher than for the other formulated filter aids samples, and the formulated filter aids material TrikotAC showed promising characteristic as a filter aids and adsorbent for organic compound in fabric filtration system.

scholarly journals Adsorptive remediation of Cu(II) and Ni(II) by microwave assisted H3PO4 activated carbon

2017 ◽  
Vol 10 ◽  
pp. S2836-S2844 ◽  
Author(s):  
Vinod Kumar Gupta ◽  
Deepak Pathania ◽  
Shikha Sharma
Keyword(s):  
Activated Carbon ◽  
Microwave Assisted

Microwave-Assisted Reforming of CH4 with CO2 over Activated Carbon

2011 ◽  
Author(s):  
Longzhi Li ◽  
Zhanlong Song ◽  
Zhongqing Li ◽  
Xiqiang Zhao ◽  
Chunyuan Ma
Keyword(s):  
Activated Carbon ◽  
Microwave Assisted

Activated carbon fiber felt and polymer fiber as biofilm carrier in a modified University of Cape Town process for sewage treatment

2013 ◽  
Vol 68 (5) ◽  
pp. 1151-1157 ◽  
Author(s):  
Dongkai Zhou
Keyword(s):  
Activated Carbon ◽  
Carbon Fiber ◽  
Inner Core ◽  
Sewage Treatment ◽  
Cape Town ◽  
Activated Carbon Fiber ◽  
Operational Parameters ◽  
Biofilm Carrier ◽  
Carbon Fiber Felt ◽  
University Of Cape Town

Biofilms on fiber-based carriers have attracted much concern in wastewater treatment processes recently. In this study: (1) a novel sandwich structure fiber-based biofilm carrier was produced, which consisted of an inner core composed of polyacrylonitrile-based activated carbon fiber felt (PAN-ACFF) and an outer coat made of polyester reticular cloth with polypropylene fiber loops; (2) the novel carrier was filled in a step-feeding pilot-scale modified University of Cape Town process (MUCT) for sewage treatment; the MUCT contained a series of pre-anoxic/anaerobic/anoxic-1/anoxic-2/oxic tanks, wherein nitrification liquor was recycled to the anoxic-2 tank and an extra liquor return from the anoxic-1 to the pre-anoxic tank was set up; and (3) the removal efficiencies of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) were continuously tested for two periods as operational parameters alternated. The optimum values were collected in Period II, when the influent loads were 2,100.6 ± 120.3 gCOD/(d m3), 205.5 ± 20.4 gTN/(d m3), 39.9 ± 3.9 gTP/(d m3), the removal percentages were 93.1 ± 1.1% of COD, 39.4 ± 3.5% of TN, and 84.6 ± 3.4% of TP. For COD, NH4+-N, and TP, the specific removal loads of filler were 291.5 ± 18.2, 22.9 ± 3.1, 4.8 ± 0.5 (g d)/kg.

Sign in / Sign up

Export Citation Format

Share Document