scholarly journals Effect of spent coffee grounds extract on astaxanthin production by Xanthophyllomyces dendrorhous

2022 ◽  
pp. 100953
Author(s):  
Yoko Hirono-Hara ◽  
Airi Kato ◽  
Yurika Mizutani ◽  
Hiroshi Kikukawa ◽  
Kiyotaka Y. Hara
Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4667
Author(s):  
Sunyong Park ◽  
Hui-Rim Jeong ◽  
Yun-A Shin ◽  
Seok-Jun Kim ◽  
Young-Min Ju ◽  
...  

Agricultural by-products have several disadvantages as fuel, such as low calorific values and high ash contents. To address these disadvantages, this study examined the mixing of agricultural by-products and spent coffee grounds, for use as a solid fuel, and the improvement of fuel characteristics through torrefaction. Pepper stems and spent coffee grounds were first dried to moisture contents of <15% and then combined, with mixing ratios varying from 9:1 to 6:4. Fuel pellets were produced from these mixtures using a commercial pelletiser, evaluated against various standards, and classified as grade A, B, or Bio-SRF. The optimal ratio of pepper stems to spent coffee grounds was determined to be 8:2. The pellets were torrefied to improve their fuel characteristics. Different torrefaction temperatures improved the mass yields of the pellets to between 50.87% and 88.27%. The calorific value increased from 19.9% to 26.8% at 290 °C. The optimal torrefaction temperature for coffee ground pellets was 230 °C, while for other pellets, it was 250 °C. This study provides basic information on the potential enhancement of agricultural by-products for fuel applications.


Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 494 ◽  
Author(s):  
Kang Hyun Lee ◽  
Ye Won Jang ◽  
Jeongho Lee ◽  
Seunghee Kim ◽  
Chulhwan Park ◽  
...  

Biorefinery, which utilizes carbon-neutral biomass as a resource, is attracting attention as a significant alternative in a modern society confronted with climate change. In this study, spent coffee grounds (SCGs) were used as the feedstock for lactic acid fermentation. In order to improve sugar conversion, alkali pretreatment was optimized by a statistical method, namely response surface methodology (RSM). The optimum conditions for the alkali pretreatment of SCGs were determined as follows: 75 °C, 3% potassium hydroxide (KOH) and a time of 2.8 h. The optimum conditions for enzymatic hydrolysis of pretreated SCGs were determined as follows: enzyme complex loading of 30-unit cellulase, 15-unit cellobiase and 50-unit mannanase per g biomass and a reaction time of 96 h. SCG hydrolysates were used as the carbon source for Lactobacillus cultivation, and the conversions of lactic acid by L. brevis ATCC 8287 and L. parabuchneri ATCC 49374 were 40.1% and 55.8%, respectively. Finally, the maximum lactic acid production by L. parabuchneri ATCC 49374 was estimated to be 101.2 g based on 1000 g of SCGs through the optimization of alkali pretreatment and enzymatic hydrolysis.


2021 ◽  
Vol 150 ◽  
pp. 106141
Author(s):  
Ekaterina Sermyagina ◽  
Clara Lisseth Mendoza Martinez ◽  
Markku Nikku ◽  
Esa Vakkilainen

Insects ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 475
Author(s):  
Vassilios Sideris ◽  
Maria Georgiadou ◽  
Georgios Papadoulis ◽  
Konstantinos Mountzouris ◽  
Antonios Tsagkarakis

The effect of spent coffee grounds (SCG), brewer’s spent grains (BSG) and their mixtures with the addition of brewer’s yeast (BY) were tested in two rearing densities of the Black Soldier Fly, Hermetia illucens (L.). Different treatments were investigated on larval development, survival, yield, protein conversion (PrCR) and bioconversion rate (BCR), substrate mass reduction and body composition of the insect. BSF larvae were able to develop sufficiently in all diets, except on sole SCG. The addition of BY enhanced the performance properties of diets, especially in the case of SCG, where larvae underperformed. Substrate mass reduction, PrCR and BCR were affected only by feed and exhibited higher values on reference feed, followed by BSG and SCG+BSG enriched with BY. Density did not have a significant effect on various larval nutrients, except for fat, which was higher on larvae fed enriched feeds with BY and in the 300 larval density. The interaction between feed and density strongly affected the nitrogen and protein levels, larval yield and ash. Generally, diets which contained SCG exhibited high larval crude protein levels. Our results illustrate that low value beverage by-products can be successfully utilized as constituents of a successful BSF diet.


2019 ◽  
pp. 327-351 ◽  
Author(s):  
Norma Julieta Salazar‐López ◽  
Carlos Vladimir López‐Rodríguez ◽  
Diego Antonio Hernández‐Montoya ◽  
Rocio Campos‐Vega

2021 ◽  
pp. 002199832110022
Author(s):  
Ahmed Alhelal ◽  
Zaheeruddin Mohammed ◽  
Shaik Jeelani ◽  
Vijaya K Rangari

Semi-crystalline carbon biochar is derived from spent coffee grounds (SCG) by a controlled pyrolysis process at high temperature/pressure conditions. Obtained biochar is characterized using XRD, SEM, and TEM techniques. Biochar particles are in the micrometer range with nanostructured morphologies. The SCG biochar thus produced is used as reinforcement in epoxy resin to 3 D print samples using the direct-write (DW) method with 1 and 3 wt. % loadings. Rheology results show that the addition of biochar makes resin viscous, enabling it to be stable soon after print; however, it could also lead to clogging of resin in printer head. The printed samples are characterized for chemical, thermal and mechanical properties using FTIR, TGA, DMA and flexure tests. Storage modulus improved with 1 wt. % biochar addition up to 27.5% and flexural modulus and strength increased up to 55.55% and 43.30% respectively. However, with higher loading of 3 wt. % both viscoelastic and flexural properties of 3D printed samples drastically reduced thus undermining the feasibility of 3D printing biochar reinforced epoxies at higher loadings.


Sign in / Sign up

Export Citation Format

Share Document