scholarly journals Valorisation of crude glycerol to value-added products: Perspectives of process technology, economics and environmental issues

2020 ◽  
Vol 27 ◽  
pp. e00487 ◽  
Author(s):  
Jaspreet Kaur ◽  
Anil Kumar Sarma ◽  
Mithilesh Kumar Jha ◽  
Poonam Gera
Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 609 ◽  
Author(s):  
Niravkumar Mahendrasinh Kosamia ◽  
Mahdieh Samavi ◽  
Bijaya Kumar Uprety ◽  
Sudip Kumar Rakshit

The rapid growth of global biodiesel production requires simultaneous effective utilization of glycerol obtained as a by-product of the transesterification process. Accumulation of the byproduct glycerol from biodiesel industries can lead to considerable environment issues. Hence, there is extensive research focus on the transformation of crude glycerol into value-added products. This paper makes an overview of the nature of crude glycerol and ongoing research on its conversion to value-added products. Both chemical and biological routes of glycerol valorization will be presented. Details of crude glycerol conversion into microbial lipid and subsequent products will also be highlighted.


2020 ◽  
pp. 1287-1303
Author(s):  
Shlrene Quaik ◽  
Asha Embrandiri ◽  
Kaizar Hossain ◽  
Norli Ismail

Overpopulation is no doubt worldwide concern as it brings different problems to urbanization process as well as environment. Waste is number one side product of overpopulation. Waste generation is ever increasing in both urban and suburban area and has led to many environmental issues. Many of the waste generated have potential to be transformed into value added products. By recycling, reusing and re-purposing these wastes, we are actually reducing the amount of waste produced and at the same time helping to solve waste disposal problem as many of the wastes exhibit strong energy producing potential. Overpopulation may be an issue of its own; nonetheless, it also provides us an army of human power in tackling environmental issues. Population is a valuable asset. The potential of that amount of man power, especially youth, combining with various awareness campaigns and 3R campaigns introduced by government and NGO are important in targeting these problems.


2020 ◽  
Author(s):  
Shailendra Kumar Singh ◽  
Ranjeet K Singh

Abstract Mixing coal mine overburden with sodium silicate and cement, for manufacturing bricks was studied with the objective of converting the coal mine overburden waste into value-added products. Bricks were prepared using different compositions of coal mine overburden with proportions of sodium silicate and Ordinary Portland Cement (OPC), in cuboid mould (9″ X 5″X 3″). Bricks were air dried for 24 hours, placed in oven for 115 ± 10 °C for 24 hours. Characterization of tailings and manufactured bricks were done. Mechanical properties such as compressive strength (CS), water absorption (WA), loss on ignition (LoI) and efflorescence were measured. The maximum CS of 9.5 N/mm2 was recorded for brick having overburden to cement ratio of 8:2. However, for making it more economical the ratio of 9:1 was considered and this compares very well cost with full filed the Indian standard (IS): 3495 (Part 1) (1992) of bricks. The results also indicated that the overburden percentage in the bricks affect their mechanical properties. The WA rates of the manufactured bricks are low compared to standard conventional clay bricks, and the same varies with process parameters. The low capillary pore may deter the formation of efflorescence. The process, with standardized parameters, may be commercially adapted, and large quantities of coal mine overburden may be put to use in making bricks. Thus, the process technology observed in this paper can potentially convert the huge amount of environmentally hazardous waste into value added product. Coal mine overburden may materialize as a sustainable supplement to conventional clay, use of which in brick making is totally restricted. The finding also usher a new area of research.


2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Magdalena Rakicka-Pustułka ◽  
Joanna Miedzianka ◽  
Dominika Jama ◽  
Sylwia Kawalec ◽  
Kamila Liman ◽  
...  

Abstract Background Contemporary biotechnology focuses on many problems related to the functioning of developed societies. Many of these problems are related to health, especially with the rapidly rising numbers of people suffering from civilization diseases, such as obesity or diabetes. One factor contributing to the development of these diseases is the high consumption of sucrose. A very promising substitute for this sugar has emerged: the polyhydroxy alcohols, characterized by low caloric value and sufficient sweetness to replace table sugar in food production. Results In the current study, yeast belonging to the Yarrowia clade were tested for erythritol, mannitol and arabitol production using crude glycerol from the biodiesel and soap industries as carbon sources. Out of the 13 tested species, Yarrowia divulgata and Candida oslonensis turned out to be particularly efficient polyol producers. Both species produced large amounts of these compounds from both soap-derived glycerol (59.8–62.7 g dm−3) and biodiesel-derived glycerol (76.8–79.5 g dm−3). However, it is equally important that the protein and lipid content of the biomass (around 30% protein and 12% lipid) obtained after the processes is high enough to use this yeast in the production of animal feed. Conclusions The use of waste glycerol for the production of polyols as well as utilization of the biomass obtained after the process for the production of feed are part of the development of modern waste-free technologies.


2011 ◽  
Vol 27 (4) ◽  
pp. 655-662 ◽  
Author(s):  
P. Meyer ◽  
S. Pankaew ◽  
P. Boonsawang ◽  
C. Tongurai

Author(s):  
Shlrene Quaik ◽  
Asha Embrandiri ◽  
Kaizar Hossain ◽  
Norli Ismail

Overpopulation is no doubt worldwide concern as it brings different problems to urbanization process as well as environment. Waste is number one side product of overpopulation. Waste generation is ever increasing in both urban and suburban area and has led to many environmental issues. Many of the waste generated have potential to be transformed into value added products. By recycling, reusing and re-purposing these wastes, we are actually reducing the amount of waste produced and at the same time helping to solve waste disposal problem as many of the wastes exhibit strong energy producing potential. Overpopulation may be an issue of its own; nonetheless, it also provides us an army of human power in tackling environmental issues. Population is a valuable asset. The potential of that amount of man power, especially youth, combining with various awareness campaigns and 3R campaigns introduced by government and NGO are important in targeting these problems.


2019 ◽  
Vol 20 (10) ◽  
pp. 776-786 ◽  
Author(s):  
Charalampia Dimou ◽  
Haralabos C. Karantonis ◽  
Dimitrios Skalkos ◽  
Antonios E. Koutelidakis

Owning to the increase in the world population as well as the consumer’s awareness on the health benefits of consumption of fruits, the demand for both fresh and processed fruits has been increased. The by-product and waste streams generated from fruit processing industries are extremely diverse, owning mainly to different fruits varieties and the wide range of the processes employed towards the production of the end fruit-based products. Due to the increasing production and processing of fruits, disposal of waste and by-product streams has become a serious issue, since these materials are prone to microbial spoilage. Also, the inappropriate waste management practices pose severe environmental issues. Furthermore, the costs of drying and storage of fruit processing residues are economically limiting factors hindering their further exploitation. Therefore, fruit processing by-products such as peels, seeds and unused flesh are often utilized as fertilizers. On the other hand, plant residues contain biomolecules such as vitamins, proteins, minerals, antioxidants and aromatic oil. Recovery of bioactive compounds holds a great potential for their usage in food industry as functional ingredients and nutraceuticals or in pharmaceutical and in cosmetic applications. So, valorization of plant fruit processing by-products to high-value added compounds, constitute a promising alternative not only for addressing fruit residues management issues but also leading to the production of functional food products of high nutritional value, with several potential beneficial health effects. The aim of this paper is to highlight current trends in addressing environmental issues caused by the production of high volumes of specific categories of fruit processing waste streams by investigating their potential usage as natural raw materials for the recovery of valuable bioactive compounds (such as polyphenols, dietary fibers or aromatic oil). The extracted nutrients may be used in the industrial food sector for the production of functional foods, nutraceuticals or even as health promoting natural pharmaceutical ingredients or additives for the production of innovative enriched foods. </p><p> Highlights: • Fruit processing by product streams are rich in bioactive compounds. </p><p> • Integration of fruit by-products and waste streams to value added products such as additives, unconventional oil, bioactive compounds and novel functional products is a very interesting approach regarding fruit processing residues exploitation. </p><p> • Recovering of biomolecules from fruit residues by non-thermal processes could lead to the efficient production of highly purified functional ingredients. </p><p> • Negative-valued fruit processing residues could be recycled for the production of health promoting value added products.


Sign in / Sign up

Export Citation Format

Share Document