A functional polysaccharide film forming by pectin, chitosan, and tea polyphenols

2019 ◽  
Vol 215 ◽  
pp. 1-7 ◽  
Author(s):  
Hao-Xiang Gao ◽  
Zheng He ◽  
Qun Sun ◽  
Qiang He ◽  
Wei-Cai Zeng
Author(s):  
Mohammed Sabbah ◽  
Prospero Di Pierro ◽  
Marilena Esposito ◽  
C Valeria L Giosafatto ◽  
Loredana Mariniello ◽  
...  

Author(s):  
D. M. Davies ◽  
R. Kemner ◽  
E. F. Fullam

All serious electron microscopists at one time or another have been concerned with the cleanliness and freedom from artifacts of thin film specimen support substrates. This is particularly important where there are relatively few particles of a sample to be found for study, as in the case of micrometeorite collections. For the deposition of such celestial garbage through the use of balloons, rockets, and aircraft, the thin film substrates must have not only all the attributes necessary for use in the electron microscope, but also be able to withstand rather wide temperature variations at high altitude, vibration and shock inherent in the collection vehicle's operation and occasionally an unscheduled violent landing.Nitrocellulose has been selected as a film forming material that meets these requirements yet lends itself to a relatively simple clean-up procedure to remove particulate contaminants. A 1% nitrocellulose solution is prepared by dissolving “Parlodion” in redistilled amyl acetate from which all moisture has been removed.


Author(s):  
Earl R. Walter ◽  
Glen H. Bryant

With the development of soft, film forming latexes for use in paints and other coatings applications, it became desirable to develop new methods of sample preparation for latex particle size distribution studies with the electron microscope. Conventional latex sample preparation techniques were inadequate due to the pronounced tendency of these new soft latex particles to distort, flatten and fuse on the substrate when they dried. In order to avoid these complications and obtain electron micrographs of undistorted latex particles of soft resins, a freeze-dry, cold shadowing technique was developed. The method has now been used in our laboratory on a routine basis for several years.The cold shadowing is done in a specially constructed vacuum system, having a conventional mechanical fore pump and oil diffusion pump supplying vacuum. The system incorporates bellows type high vacuum valves to permit a prepump cycle and opening of the shadowing chamber without shutting down the oil diffusion pump. A baffeled sorption trap isolates the shadowing chamber from the pumps.


2013 ◽  
Author(s):  
Husna Zulkipli ◽  
Norita Salim ◽  
Gabriele Anisah Froemming ◽  
Aletza Mohd Ismail ◽  
Hapizah Nawawi

2017 ◽  
Vol 1 ◽  
pp. s55
Author(s):  
Sarah Y Siu ◽  
Georgina M Ferzli ◽  
Neil Brody

Abstract Not Available


2020 ◽  
pp. 41-50
Author(s):  
Artem Mikhailovich Morozov ◽  
◽  
Alexey Nikolaevich Sergeev ◽  
Gennady Alexandrovich Dubatolov ◽  
Nikolay Alexandrovich Sergeev ◽  
...  

The aim – analyze modern Russian and foreign literary sources in order to determine modern means for treating the hands of the surgeon and the operating field. Results. One of the key points in the prevention of surgical infection is the treatment of the surgeon’s hands and the operating field with effective skin antiseptics in order to destroy pathogenic and opportunistic microorganisms that colonize intact skin. In modern practice, skin antiseptics are predominantly used containing alcohols as active substances, in particular ethyl, propyl and isopropyl, halogenated substances such as iodine and iodophores, guanidines, which include chlorhexidine digluconate, as well as quaternary ammonium compounds. Moreover, the most widespread are combined preparations containing several active substances and functional additives, which makes it possible to neutralize the negative properties of various active substances. Also, an interesting and promising direction is the use of polymer operating films or film-forming antiseptics. Currently, research is being actively carried out aimed at finding and developing modern highly effective antiseptic agents and their rational combinations that meet the necessary requirements, are optimal in their properties, cost-effective and comfortable to use.


Sign in / Sign up

Export Citation Format

Share Document