Direct synthesis and growth mechanism of metal molybdate (AMoO 4 ; A = Ca and Ba) fine particles via the mechanochemical method

2017 ◽  
Vol 43 ◽  
pp. S435-S443 ◽  
Author(s):  
Wanwisa Janbua ◽  
Theerachai Bongkarn ◽  
Wanwilai Vittayakorn ◽  
Naratip Vittayakorn
RSC Advances ◽  
2016 ◽  
Vol 6 (45) ◽  
pp. 38671-38679 ◽  
Author(s):  
Jian Ding ◽  
Jiangbo Hu ◽  
Teng Xue ◽  
Yimeng Wang ◽  
Haihong Wu ◽  
...  

Diffusion-enhanced ZSM-5 aggregates by n-hexylamine directing are obtained with easy control on mesopore and the possible growth mechanism is proposed.


2018 ◽  
Vol 20 (9) ◽  
pp. 1962-1969 ◽  
Author(s):  
Maxim N. Temnikov ◽  
Anton A. Anisimov ◽  
Pavel V. Zhemchugov ◽  
Dmitry N. Kholodkov ◽  
Alexander S. Goloveshkin ◽  
...  

The present work shows a new one-stage mechanochemical method for the direct synthesis of alkoxysilanes.


2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Nguyen Duc Van

The synthesis and structural properties of lead-free piezoelectric (K0.5Na0.5)NbO3powders prepared by mechanochemical method using Nb2O5, K2CO3, and Na2CO3as starting materials were reported. X-ray diffraction, infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy were used to characterize the prepared samples. Results showed that, for the first time, by selecting the milling speed of 600 rpm and the ball-to-powder weight ratio of 35 : 1 as milling parameters, pure (K0.5Na0.5)NbO3crystalline phase was obtained directly in the as-milled samples after 5 h of milling time. The existence of a carbonato complex betweenCO32−and Nb5+ions as an intermediate species of the formation of (K0.5Na0.5)NbO3was also found.


2009 ◽  
Vol 9 (3) ◽  
pp. 1489-1493 ◽  
Author(s):  
Weiwei Lei ◽  
Dan Liu ◽  
Jian Zhang ◽  
Pinwen Zhu ◽  
Qiliang Cui ◽  
...  

Atmosphere ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 134
Author(s):  
Qi Jiang ◽  
Hengde Zhang ◽  
Fei Wang ◽  
Fei Wang

Haze is a majorly disastrous type of weather in China, especially central and eastern of China. The development of haze is mainly caused by highly concentrated fine particles (PM2.5) on a regional scale. Here, we present the results from an autumn and winter study conducted from 2013 to 2020 in seven highly polluted areas (27 representative stations) in central and eastern China to analyze the growth mechanism of PM2.5. At the same time, taking Beijing Station as an example, the characteristics of aerosol composition and particle size in the growth phase are analyzed. Taking into account the regional and inter-annual differences of fine particles (PM2.5) distribution, the local average PM2.5 growth value of the year is used as the boundary value for dividing slow, rapid, and explosive growth (only focuses on the hourly growth rate greater than 0). The average value of PM2.5 in the autumn and winter of each regional representative station shows a decreasing trend as a whole, especially after 2017, whereby the decreasing trend was significant. The distribution value of +ΔPM2.5 (PM2.5 hourly growth rate) in the north of the Huai River is lower than that in the south of the Huai River, and both of the +ΔPM2.5 after 2017 showed a significant decreasing trend. The average PM2.5 threshold before the explosive growth is 70.8 µg m−3, and the threshold that is extremely prone to explosive growth is 156 µg m−3 to 277 µg m−3 in north of the Huai River. For the area south of the Huai River, the threshold for PM2.5 explosive growth is relatively low, as a more stringent threshold also puts forward stricter requirements on atmospheric environmental governance. For example, in Beijing, the peak diameters gradually shift to larger sizes when the growth rate increases. The number concentration increasing mainly distributed in Aitken mode (AIM) and Accumulation mode (ACM) during explosive growth. Among the various components of submicron particulate matter (PM1), organic aerosol (OA), especially primary OA (POA), have become one of the most critical components for the PM2.5 explosive growth in Beijing. During the growth period, the contribution of secondary particulate matter (SPM) to the accumulated pollutants is significantly higher than that of primary particulate matter (PPM). However, the proportion of SPM gradually decreases when the growth rate increases. The contribution of the PPM can reach 48% in explosive growth. Compared to slow and rapid growth, explosive growth mainly occurs in the stable atmosphere of higher humidity, lower pressure, lower temperature, small winds, and low mixed layers.


1995 ◽  
Vol 12 (5) ◽  
pp. 516-522 ◽  
Author(s):  
Hee Taik Kim ◽  
Hyeon Park ◽  
Seong Youl Bae ◽  
Kyong Ok Yoo

Author(s):  
Tasuku Uchimura ◽  
Fumitaka Takeiri ◽  
Kei Okamoto ◽  
Takashi Saito ◽  
Takashi Kamiyama ◽  
...  

Barium titanium oxyhydride BaTiO3–xHx is a promising functional material that exhibits H–/e– mixed conduction. Here we firstly report a direct synthesis of BaTiO3–xHx by mechanochemical method. The prepared polycrystalline sample...


2011 ◽  
Vol 287-290 ◽  
pp. 445-448 ◽  
Author(s):  
Jin Zhu Xue ◽  
Chao Huo ◽  
Jia Yuan Shen ◽  
Qing Hua Xia ◽  
Xiang Wei Cheng

The effects of ultrasonic and Baumé degree of Ca(OH)2 suspension on the size of nano-CaCO3 prepared by carbonization were studied. The results indicated that ultrasonic could improve the dispersibility of powder, reduce the aggregation and decrease the particle size of nanometer calcium carbonate. The fine particles synthesized at 40 kHz were smaller but rougher than that obtained at 20 kHz. The frequency hardly influenced the morphology of nanometer calcium carbonate. Moreover, the lower Baumé degree of Ca(OH)2 suspension was adopted, the smaller the size of nano-CaCO3 were obtained. And in the process of carbonation, we were using SEM and XRD to study the nucleation and growth mechanism, it indicated that amorphous calcium carbonate particles acted as nuclei in the initial stage oriented absorption calcium hydroxide to form wirelike substances. In the end, these botryoidal shape crystals were disaggregated into calcium carbonate with the particle diameters of 30nm.


Sign in / Sign up

Export Citation Format

Share Document