Preparation and slag erosion resistance mechanism of MgAlON based composite refractories synthesized from solid waste

2020 ◽  
Vol 46 (16) ◽  
pp. 26035-26043
Author(s):  
Weibin Chen ◽  
Bo Wang ◽  
Lili Liu ◽  
Hao Wang ◽  
Xidong Wang
2013 ◽  
Vol 395-396 ◽  
pp. 544-547
Author(s):  
Zhi Hui Li ◽  
Dian Li Qu ◽  
Jing Li ◽  
Lin Wang

The way of producing ladle used MgO-Al2O3 castables using reclaimed bricks of ladle as aggregate is researched by structure analysis, XRD and phase diagram analysis. Influence on structure and physical properties of castables added different percentage of reclaimed bricks is discussed. The following conclusions are got: Adding suitable reclaimed ladle bricks won’t decrease the strength of the specimens, all the specimens have high bulk density(≥2.98g/cm3) and low apparent porosity(≤14%); Suitable addition of reclaimed ladle bricks as aggregate can improve the thermal shock resistance of MgO-Al2O3 castables, however, over-addition will weaken its thermal shock resitance; Slag erosion resistance increases with the addition of reclaimed ladle bricks. To sum up, reclaimed ladle bricks can be used in MgO-Al2O3 castables and castables with excellent comprehensive properties can be got when 12.5% reclaimed ladle bricks are added as aggregate.


Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 322
Author(s):  
Hong Qi ◽  
Qingshan Shi ◽  
Yuhai Qian ◽  
Yueming Li ◽  
Jingjun Xu ◽  
...  

In this work, the atomic oxygen (AO) erosion-resistance effect and mechanism of the Perhydropolysilazane (PHPS) coating were investigated from the perspective of element distribution in the depth direction. The results revealed that the coating demonstrated good adhesion and intrinsic AO erosion-resistance, which was attributed to the composition gradient formed in the coating. Moreover, the oxygen ratio of the SiOx on top layer of the coating could be elevated during AO exposure, strengthening the Ar ion etching durability of the coating. According to these results, an AO erosion-resistance mechanism model of the PHPS-derived SiOx coating was finally obtained.


Author(s):  
Kriti Jain ◽  
Chirag Shah

The increasing volume and complexity of waste associated with the modern economy as due to the ranging population, is posing a serious risk to ecosystems and human health. Every year, an estimated 11.2 billion tonnes of solid waste is collected worldwide and decay of the organic proportion of solid waste is contributing about 5 per cent of global greenhouse gas emissions (UNEP). Poor waste management - ranging from non-existing collection systems to ineffective disposal causes air pollution, water and soil contamination. Open and unsanitary landfills contribute to contamination of drinking water and can cause infection and transmit diseases. The dispersal of debris pollutes ecosystems and dangerous substances from waste or garbage puts a strain on the health of urban dwellers and the environment. India, being second most populated country of the world that too with the lesser land area comparatively, faces major environmental challenges associated with waste generation and inadequate waste collection, transport, treatment and disposal. Population explosion, coupled with improved life style of people, results in increased generation of solid wastes in urban as well as rural areas of the country. The challenges and barriers are significant, but so are the opportunities. A priority is to move from reliance on waste dumps that offer no environmental protection, to waste management systems that retain useful resources within the economy [2]. Waste segregation at source and use of specialized waste processing facilities to separate recyclable materials has a key role. Disposal of residual waste after extraction of material resources needs engineered landfill sites and/or investment in waste-to-energy facilities. This study focusses on the minimization of the waste and gives the brief about the various initiations for proper waste management system. Hence moving towards the alternatives is the way to deal with these basic problems. This paper outlines various advances in the area of waste management. It focuses on current practices related to waste management initiatives taken by India. The purpose of this article put a light on various initiatives in the country and locates the scope for improvement in the management of waste which will also clean up the unemployment.


2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Salma Savira Siddik ◽  
Eka Wardhani

<p>Hospital X was class b private hospitals that are located in Batam with 297 unit beds. The waste that can be categorized as solid waste medical in the hospital which is infectious, pharmacy, hazardous and toxic waste, cytotoxic, sharp object.  The purpose of this research is to identify, a source of , the characteristics, solid waste medical produced by hospital X in Batam and also conduct an evaluation of solid waste medical management hospital in accordance with the minister of environment and forestry 56 2015 on procedures and technical requirements of hazardous and toxic waste management than health service facilities. This research used primary and secondary data collection method. The research results show solid waste medical management at the hospital X in Batam most of them are in according to rule. But there are some things that must be improved are blinding trash bag, efficiency and minimal temparature the combustion chamber incinerator. Management efforts must to do are briefing to officer of the waste collection about the way to blinding trash bag in according to the regulation and the incinerator that can serve confirming to standard of burning hazardous and toxic waste. <strong></strong></p>


TAPPI Journal ◽  
2017 ◽  
Vol 16 (7) ◽  
pp. 383-391
Author(s):  
CARLA CÉLIA ROSA MEDEIROS ◽  
FLÁVIA AZEVEDO SILVA ◽  
SAULO GODOY PIGNATON ◽  
ESTANISLAU VICTOR ZUTAUTAS ◽  
KLEVERSON FIGUEIREDO

There are many points in a kraft mill where the alkaline compounds are purged from the process. Several effluents, solid waste, and air emissions contain alkali, which leads to the necessity of chemical makeups to maintain the liquor balance. The main loss of alkali at the Veracel mill is present in the wastewater from the recovery boiler; more precisely, it is from the ash leaching system, which represents 80% of the total losses. To minimize the alkaline losses while keeping the chloride level in the recovery cycle under control, a project was developed at Veracel. Key actions were taken by adjusting the control loops of the ash leaching system, mainly on the slurry density and purge control. These adjustments led to a decrease in alkali losses and to an increase of treated ash, and kept the chloride level of the recovery boiler dust at 2.6%.


Author(s):  
A Yurchenko ◽  
◽  
D Kulikova ◽  
E Dmitruk ◽  
L Cheberiachko ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document