A new class of biochar-based slow-release phosphorus fertilizers with high water retention based on integrated co-pyrolysis and co-polymerization

Chemosphere ◽  
2021 ◽  
pp. 131481
Author(s):  
Xiongfang An ◽  
Zhansheng Wu ◽  
Xuan Liu ◽  
Wen Shi ◽  
Fei Tian ◽  
...  
Author(s):  
YC Danarto ◽  
Anggita Nugrahey ◽  
Sela Murni Noviani

<p>During this time, the use of urea is not efficient, because about 40-70% of nitrogen in the fertilizer is not absorbed by plants. In order to increase the effectivity of nitrogen release in urea fertilizer, it needs to be coated with modified chitosan as slow releasing agent to form a hydrogel material by forming a cross linking with glutaraldehyde cross-linker.The aims of this research is to study the mechanism and the appropriate kinetic model of nitrogen release in slow releasing fertilizer of modified chitosan. This research was conducted by analyzing the ability of bio-hydrogel by calculating the percentage of swelling ratio and water retention of hydrogel and the nitrogen release in slow releasing fertilizer both in the soil and water. The experiments were conducted by varying the amount of urea used which  30 gram, 40 gram, 50 gram, 60 gram and 70 gram of urea fertilizer. The The release profile is then plotted on several models of diffusion kinetic such as zero order, first order, higuchi and korsmeyer peppas. The appropriate model of diffusion kinetic is chosen by the largest correction factor (R2).The results showed that nitrogen release of the slow releasing fertilizer in the soil with 50% urea content  and  the  water  followed  korsmeyer  peppas  model  with  fickian  mechanism. Nitrogen release in the soil with urea content of 30%, 40%, 60%, and 70% followed the korsmeyer peppas model with nonfickian mechanism.</p>


Author(s):  
Anthony S. R. Juo ◽  
Kathrin Franzluebbers

Allophanic soils are dark-colored young soils derived mainly from volcanic ash. These soils typically have a low bulk density (< 0.9 Mg/m3), a high water retention capacity (100% by weight at field capacity), and contain predominantly allophanes, imogolite, halloysite, and amorphous Al silicates in the clay fraction. These soils are found in small, restricted areas with volcanic activity. Worldwide, there are about 120 million ha of allophanic soils, which is about 1% of the Earth's ice-free land surface. In tropical regions, allophanic soils are among the most productive and intensively used agricultural soils. They occur in the Philippines, Indonesia, Papua New Guinea, the Caribbean and South Pacific islands, East Africa, Central America, and the Andean rim of South America. Allophanic soils are primarily Andisols and andic Inceptisols, Entisols, Mollisols, and Alfisols according to the Soil Taxonomy classification. Allophanic soils generally have a dark-colored surface soil, slippery or greasy consistency, a predominantly crumb and granular structure, and a low bulk density ranging from 0.3 to 0.8 Mg/m3. Although allophanic soils are apparently well-drained, they still have a very high water content many days after rain. When the soil is pressed between fingers, it gives a plastic, greasy, but non-sticky sensation of a silty or loamy texture. When dry, the soil loses its greasiness and becomes friable and powdery. The low bulk density of allophanic soils is closely related to the high soil porosity. For example, moderately weathered allophanic soils typically have a total porosity of 78%, with macro-, meso-, and micropores occupying 13%, 33%, and 32%, respectively. Water retained in the mesopores is readily available for plant uptake. Water retained in the micropores is held strongly by soil particles and is not readily available for plant use. The macropores provide soil aeration and facilitate water infiltration. The high water retention capacity is also associated with the high soil porosity. In allophanic soils formed under a humid climate, especially those containing large amounts of allophane, the moisture content at field capacity can be as high as 300%, calculated on a weight basis. Such extremely high values of water content seem misleading.


Fibers ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 61 ◽  
Author(s):  
Bruno Ribeiro ◽  
Tadaaki Uchiyama ◽  
Jun Tomiyama ◽  
Takashi Yamamoto ◽  
Yosuke Yamashiki

The use of sugarcane residues in mortar and concrete is believed to contribute to a reduction of costs and environmental problems, such as the reduction of mining of natural aggregates and incorrect disposal of the sugarcane residues. Bagasse fiber has a high water retention rate and thus may be considered as a countermeasure for urban heat islands. Because of these properties, bagasse fiber and bagasse sand were added into the preparation of the interlocking concrete blocks. An investigation of the flexural strength and the contribution of the sugarcane residues against an urban heat island was made. The results showed that, by adding 2.0% of bagasse fiber and 5.0% of bagasse sand in concrete, the flexural strength and the water retention content increased in comparison to the control composite. Moreover, the surface temperature and the water evaporation rate of the blocks were smaller in comparison to the control composite.


2011 ◽  
Vol 117-119 ◽  
pp. 1100-1102
Author(s):  
Shao Hong Li ◽  
Yue Guo Shen ◽  
Zhong Feng Shi

The construction of position engineering causes a lot of naked earth slopes and rock slopes. Because the earth and rock lack of water absorption and water retention, traditional vegetation camouflage can not make it. The slow-release fertilizer with the function of water-absorption and water-retention make up it and which will be applied widely in vegetation camouflage of position engineering.


2011 ◽  
Vol 18 (22) ◽  
pp. 222026 ◽  
Author(s):  
M Yamazaki ◽  
M Kanaya ◽  
T Shimazu ◽  
T Ohashi ◽  
N Kato ◽  
...  

2018 ◽  
Vol 90 ◽  
pp. 333-340 ◽  
Author(s):  
Ali Olad ◽  
Hamid Zebhi ◽  
Dariush Salari ◽  
Abdolreza Mirmohseni ◽  
Adel Reyhani Tabar

Sign in / Sign up

Export Citation Format

Share Document