Comparison of core–shell particles and sub-2μm fully porous particles for use as ultrafast second dimension columns in two-dimensional liquid chtomatography

2015 ◽  
Vol 1386 ◽  
pp. 31-38 ◽  
Author(s):  
Imad A. Haidar Ahmad ◽  
Arianne Soliven ◽  
Robert C. Allen ◽  
Marcelo Filgueira ◽  
Peter W. Carr
2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Christophe Waterlot ◽  
Anaïs Goulas

Effects of temperature on the reversed-phase chromatographic behavior of PAHs were investigated on three columns. The first was the recent C18column (250 mm × 4.6 mm) packed with 5 µm core-shell particles while the others were more conventional C18columns (250 mm × 4.6 mm) packed with fully porous particles. Among the 16 PAHs studied, special attention has been paid to two pairs of PAHs, fluorene/acenaphthene and chrysene/benzo[a]anthracene, which often present coeluting problems. Due to the low surface area of the core-shell particles, lowest retention time of each PAH was highlighted and effects of the temperature on the separation of PAHs were negligible in regard to those using columns packed with fully porous particles. For each PAH studied, it was demonstrated that peaks were symmetrical and may be considered as Gaussian peaks when the column packed with core-shell particle was employed. In the best condition, the separation of PAHs was conducted at 16°C under very low pressure values (670–950 psi = 46–65 bars). Depending on PAHs, the limit of detection ranged from 0.88 to 9.16 μg L−1. Analysis of spiked acetonitrile samples with PAHs at 10 and 50 µg L−1and tap water at 10 µg L−1gave very good recoveries (94%–109.3%) and high precision (1.1%–3.5%).


2013 ◽  
Vol 16 (3) ◽  
pp. 513-524 ◽  
Author(s):  
Ivo Leibacher ◽  
Wolfgang Dietze ◽  
Philipp Hahn ◽  
Jingtao Wang ◽  
Steven Schmitt ◽  
...  

2018 ◽  
Vol 101 (6) ◽  
pp. 1985-1992 ◽  
Author(s):  
Adel Ehab Ibrahim ◽  
Hisham Hashem ◽  
Hanaa Saleh ◽  
Magda Elhenawee

Abstract Background: The introduction of monolithic rods and core-shell particles as new morphologies of packing materials different from the conventional totally porous particles resulted in a leap forward for performance in LC. Meanwhile, environmental safety has become increasingly important in many areas, especially in industry and research laboratories. Objective: This study compared the efficiencies of commercially available columns of different lengths and diameters when greener chromatographic conditions were utilized. The main purpose of this study is to help practitioners select the most appropriate stationary phase for faster and greener analysis. Methods: The three types of stationary phases were compared in terms of separation efficiency, number of theoretical plates, peak shape, selectivity, resolution, analysis time, mobile phase consideration, and permeability using six drug molecules. Results: Results indicated that core-shell and monolithic stationary phases had superiority over the conventional totally porous particles in terms of efficiency and speed of analysis. Monolithic rods had lower column backpressure and higher permeability, so they are more suitable for higher mobile phase flow rates and viscosities. However, core-shell particles provided enhanced peak shapes and number of theoretical plates. Conclusions: The choice will depend on the main purpose of analysis and the composition of the mobile phase. Compromise must be made to obtain the best trade-off between separation efficiency and analysis speed. Highlights: This study is the first to consider green chromatography concepts for the selection of the best stationary phase of new morphologies.


2021 ◽  
Vol 118 (52) ◽  
pp. e2113394118
Author(s):  
Johannes Menath ◽  
Jack Eatson ◽  
Robert Brilmayer ◽  
Annette Andrieu-Brunsen ◽  
D. Martin A. Buzza ◽  
...  

The two-dimensional self-assembly of colloidal particles serves as a model system for fundamental studies of structure formation and as a powerful tool to fabricate functional materials and surfaces. However, the prevalence of hexagonal symmetries in such self-assembling systems limits its structural versatility. More than two decades ago, Jagla demonstrated that core–shell particles with two interaction length scales can form complex, nonhexagonal minimum energy configurations. Based on such Jagla potentials, a wide variety of phases including cluster lattices, chains, and quasicrystals have been theoretically discovered. Despite the elegance of this approach, its experimental realization has remained largely elusive. Here, we capitalize on the distinct interfacial morphology of soft particles to design two-dimensional assemblies with structural complexity. We find that core–shell particles consisting of a silica core surface functionalized with a noncrosslinked polymer shell efficiently spread at a liquid interface to form a two-dimensional polymer corona surrounding the core. We controllably grow such shells by iniferter-type controlled radical polymerization. Upon interfacial compression, the resulting core–shell particles arrange in well-defined dimer, trimer, and tetramer lattices before transitioning into complex chain and cluster phases. The experimental phase behavior is accurately reproduced by Monte Carlo simulations and minimum energy calculations, suggesting that the interfacial assembly interacts via a pairwise-additive Jagla-type potential. By comparing theory, simulation, and experiment, we narrow the Jagla g-parameter of the system to between 0.9 and 2. The possibility to control the interaction potential via the interfacial morphology provides a framework to realize structural features with unprecedented complexity from a simple, one-component system.


2020 ◽  
Vol 65 (10) ◽  
pp. 904
Author(s):  
V. O. Zamorskyi ◽  
Ya. M. Lytvynenko ◽  
A. M. Pogorily ◽  
A. I. Tovstolytkin ◽  
S. O. Solopan ◽  
...  

Magnetic properties of the sets of Fe3O4(core)/CoFe2O4(shell) composite nanoparticles with a core diameter of about 6.3 nm and various shell thicknesses (0, 1.0, and 2.5 nm), as well as the mixtures of Fe3O4 and CoFe2O4 nanoparticles taken in the ratios corresponding to the core/shell material contents in the former case, have been studied. The results of magnetic research showed that the coating of magnetic nanoparticles with a shell gives rise to the appearance of two simultaneous effects: the modification of the core/shell interface parameters and the parameter change in both the nanoparticle’s core and shell themselves. As a result, the core/shell particles acquire new characteristics that are inherent neither to Fe3O4 nor to CoFe2O4. The obtained results open the way to the optimization and adaptation of the parameters of the core/shell spinel-ferrite-based nanoparticles for their application in various technological and biomedical domains.


Sign in / Sign up

Export Citation Format

Share Document