The effect of exit Reynolds number on soot volume fraction in turbulent non-premixed jet flames

2018 ◽  
Vol 187 ◽  
pp. 42-51 ◽  
Author(s):  
S.M. Mahmoud ◽  
G.J. Nathan ◽  
Z.T. Alwahabi ◽  
Z.W. Sun ◽  
P.R. Medwell ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Volume Fraction ◽  
Soot Volume Fraction ◽  
Jet Flames

Prediction of Soot Formation Trends in Turbulent Kerosene-Air Diffusion Jet Flames With Elevated Operating Pressure

2017 ◽  
Author(s):  
Pravin Nakod ◽  
Saurabh Patwardhan ◽  
Ishan Verma ◽  
Stefano Orsino
Keyword(s):  
Environmental Protection Agency ◽  
Volume Fraction ◽  
Soot Formation ◽  
Mixture Fraction ◽  
Soot Volume Fraction ◽  
Operating Pressure ◽  
Jet Flames ◽  
Emission Standard ◽  
Radial Profiles ◽  
Air Diffusion

Emission standard agencies are coming up with more stringent regulations on soot, given its adverse effect on human health. It is expected that Environmental Protection Agency (EPA) will soon place stricter regulations on allowed levels of the size of soot particles from aircraft jet engines. Since, aircraft engines operate at varying operating pressure, temperature and air-fuel ratios, soot fraction changes from condition to condition. Computation Fluid Dynamics (CFD) simulations are playing a key role in understanding the complex mechanism of soot formation and the factors affecting it. In the present work, soot formation prediction from numerical analyses for turbulent kerosene-air diffusion jet flames at five different operating pressures in the range of 1 atm. to 7 atm. is presented. The geometrical and test conditions are obtained from Young’s thesis [1]. Coupled combustion-soot simulations are performed for all the flames using steady diffusion flamelet model for combustion and Mass-Brookes-Hall 2-equation model for soot with a 2D axisymmetric mesh. Combustion-Soot coupling is required to consider the effect of soot-radiation interaction. Simulation results in the form of axial and radial profiles of temperature, mixture fraction and soot volume fraction are compared with the corresponding experimental measured profiles. The results for temperature and mixture fraction compare well with the experimental profiles. Predicted order of magnitude and the profiles of the soot volume fraction also compare well with the experimental results. The correct trend of increasing the peak soot volume fraction with increasing the operating pressure is also captured.

scholarly journals Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Anandkumar Makwana ◽  
Suresh Iyer ◽  
Milton Linevsky ◽  
Robert Santoro ◽  
Thomas Litzinger ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Volume Fraction ◽  
Soot Formation ◽  
Premixed Flames ◽  
Soot Volume Fraction ◽  
Spatial Development ◽  
Gas Turbine Combustor ◽  
Jet Flames ◽  
Jet Flame ◽  
Model Gas Turbine Combustor

The objective of this study is to understand the effects of fuel volatility on soot emissions. This effect is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The jet flames are nonpremixed and rich premixed flames in order to have fuel conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both nonpremixed and premixed flames. Comparison of aromatics and soot volume fraction in nonpremixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. Finally, we draw conclusions about important processes for soot formation in gas turbine combustor and what can be learned from laboratory-scale flames.

scholarly journals The effect of exit strain rate on soot volume fraction in turbulent non-premixed jet flames

2017 ◽  
Vol 36 (1) ◽  
pp. 889-897 ◽  
Author(s):  
S.M. Mahmoud ◽  
G.J. Nathan ◽  
Z.T. Alwahabi ◽  
Z.W. Sun ◽  
P.R. Medwell ◽  
...  
Keyword(s):  
Strain Rate ◽  
Volume Fraction ◽  
Soot Volume Fraction ◽  
Jet Flames

Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

2017 ◽  
Author(s):  
Anandkumar Makwana ◽  
Suresh Iyer ◽  
Milton Linevsky ◽  
Robert Santoro ◽  
Thomas Litzinger ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Volume Fraction ◽  
Premixed Flames ◽  
Soot Volume Fraction ◽  
Spatial Development ◽  
Inlet Temperature ◽  
Gas Turbine Combustor ◽  
Jet Flames ◽  
Jet Flame ◽  
Model Gas Turbine Combustor

The objective of this study is to understand the effects of fuel volatility on soot emissions. The effect of fuel volatility on soot is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame experiment provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame at atmospheric pressure. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise, operated at 5 atm, an inlet temperature of 560 K, and an inlet global equivalence ratio of 0.9 to 1.8. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The n-hexadecane has a boiling point of 287° C as compared to 216° C for n-dodecane and 98° C for n-heptane. The jet flames investigated are non-premixed and premixed flames (jet equivalence ratios of 24 and 6) in order to have fuel rich conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both non-premixed and premixed flames. The comparison of aromatics and soot volume fraction in non-premixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. In comparing the results from these two burner configurations, we draw conclusions about important processes for soot formation in gas turbine combustors and what can be learned from laboratory-scale flames.

Coupling LES with soot model for the study of soot volume fraction in a turbulent diffusion jet flames at various Reynolds number configurations

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Ibrahim N.H. ◽  
M. Udayakumar ◽  
Sivan Suresh ◽  
Suvanjan Bhattacharyya ◽  
Mohsen Sharifpur
Keyword(s):  
Reynolds Number ◽  
Nucleation Rate ◽  
Volume Fraction ◽  
Soot Volume Fraction ◽  
Surface Oxidation ◽  
Surface Growth ◽  
Nitrogen Diffusion ◽  
Coagulation Rate ◽  
Content Type ◽  
Jet Flame

Purpose This study aims to investigate the insights of soot formation such as rate of soot coagulation, rate of soot nucleation, rate of soot surface growth and soot surface oxidation in ethylene/hydrogen/nitrogen diffusion jet flame at standard atmospheric conditions, which is very challenging to capture even with highly sophisticated measuring systems such as Laser Induced Incandescence and Planar laser-induced fluorescence. The study also aims to investigate the volume of soot in the flame using soot volume fraction and to understand the global correlation effect in the formation of soot in ethylene/hydrogen/nitrogen diffusion jet flame. Design/methodology/approach A large eddy simulation (LES) was performed using box filtered subgrid-scale tensor. A filtered and residual component of the governing equations such as continuity, momentum, energy and species are resolved and modeled, respectively. All the filtered and residual components are numerically solved using the ILU method by considering PISO pressure–velocity solver. All the hyperbolic flux uses the QUICK algorithm, and an elliptic flux uses SOU to evaluate face values. In all the cases, Courant–Friedrichs–Lewy (CFL) conditions are maintained unity. Findings The findings are as follows: soot volume fraction (SVF) as a function of a flame-normalized length for three different Reynolds number configurations (Re = 15,000, Re = 8,000 and Re = 5,000) using LES; soot gas phase and particulate phase insights such as rate of soot nucleation, rate of soot coagulation, rate of soot surface growth and soot surface oxidation for three different Reynolds number configurations (Re = 15,000, Re = 8,000 and Re = 5,000); and soot global correction using total soot volume in the flame volume as a function of Reynolds number and Froude number. Originality/value The originality of this study includes the following: coupling LES turbulent model with chemical equilibrium diffusion combustion conjunction with semi-empirical Brookes Moss Hall (BMH) soot model by choosing C6H6 as a soot precursor kinetic pathway; insights of soot formations such as rate of soot nucleation, soot coagulation rate, soot surface growth rate and soot oxidation rate for ethylene/hydrogen/nitrogen co-flow flame; and SVF and its insights study for three inlet fuel port configurations having the three different Reynolds number (Re = 15,000, Re = 8,000 and Re = 5,000).

A new correlation between soot sheet width and soot volume fraction in turbulent non-premixed jet flames

2019 ◽  
Vol 37 (1) ◽  
pp. 927-934 ◽  
Author(s):  
S.M. Mahmoud ◽  
T.C. Lau ◽  
G.J. Nathan ◽  
P.R. Medwell ◽  
Z.T. Alwahabi ◽  
...  
Keyword(s):  
Volume Fraction ◽  
Soot Volume Fraction ◽  
Jet Flames ◽  
New Correlation ◽  
Sheet Width

scholarly journals Effects of Turbulence on the Combustion Properties of Partially Premixed Flames of Canola Methyl Ester and Diesel Blends

2011 ◽  
Vol 2011 ◽  
pp. 1-13 ◽  
Author(s):  
N. Dhamale ◽  
R. N. Parthasarathy ◽  
S. R. Gollahalli
Keyword(s):  
Reynolds Number ◽  
Methyl Ester ◽  
Alternative Energy ◽  
Volume Fraction ◽  
Energy Resource ◽  
Soot Volume Fraction ◽  
Air Entrainment ◽  
Combustion Properties ◽  
Partially Premixed ◽  
Emission Index

Canola methyl ester (CME) is a biofuel that is a renewable alternative energy resource and is produced by the transesterification of canola oil. The objective of this study was to document the effects of turbulence on the combustion characteristics of blends of CME and No 2 diesel fuel in a partially-premixed flame environment. The experiments were conducted with mixtures of pre-vaporized fuel and air at an initial equivalence ratio of 7 and three burner exit Reynolds numbers, 2700, 3600, and 4500. Three blends with 25, 50, and 75% volume concentration of CME were studied. The soot volume fraction was highest for the pure diesel flames and did not change significantly with Reynolds number due to the mutually compensating effects of increased carbon input rate and increased air entrainment as the Reynolds number was increased. The global NOx emission index was highest and the CO emission index was the lowest for the pure CME flame, and varied non-monotonically with biofuel content in the blend The mean temperature and the NOx concentration at three-quarter flame height were generally correlated, indicating that the thermal mechanism of NOx formation was dominant in the turbulent biofuel flames also.

scholarly journals Effect of the Preheated Oxidizer Temperature on Soot Formation and Flame Structure in Turbulent Methane-Air Diffusion Flames at 1 and 3 atm: A CFD Investigation

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3671
Author(s):  
Subrat Garnayak ◽  
Subhankar Mohapatra ◽  
Sukanta K. Dash ◽  
Bok Jik Lee ◽  
V. Mahendra Reddy
Keyword(s):  
Mole Fraction ◽  
Air Temperature ◽  
Reaction Rate ◽  
Volume Fraction ◽  
Diffusion Flames ◽  
Soot Formation ◽  
Flame Structure ◽  
Soot Volume Fraction ◽  
Computational Domain ◽  
Pressure Elevation

This article presents the results of computations on pilot-based turbulent methane/air co-flow diffusion flames under the influence of the preheated oxidizer temperature ranging from 293 to 723 K at two operating pressures of 1 and 3 atm. The focus is on investigating the soot formation and flame structure under the influence of both the preheated air and combustor pressure. The computations were conducted in a 2D axisymmetric computational domain by solving the Favre averaged governing equation using the finite volume-based CFD code Ansys Fluent 19.2. A steady laminar flamelet model in combination with GRI Mech 3.0 was considered for combustion modeling. A semi-empirical acetylene-based soot model proposed by Brookes and Moss was adopted to predict soot. A careful validation was initially carried out with the measurements by Brookes and Moss at 1 and 3 atm with the temperature of both fuel and air at 290 K before carrying out further simulation using preheated air. The results by the present computation demonstrated that the flame peak temperature increased with air temperature for both 1 and 3 atm, while it reduced with pressure elevation. The OH mole fraction, signifying reaction rate, increased with a rise in the oxidizer temperature at the two operating pressures of 1 and 3 atm. However, a reduced value of OH mole fraction was observed at 3 atm when compared with 1 atm. The soot volume fraction increased with air temperature as well as pressure. The reaction rate by soot surface growth, soot mass-nucleation, and soot-oxidation rate increased with an increase in both air temperature and pressure. Finally, the fuel consumption rate showed a decreasing trend with air temperature and an increasing trend with pressure elevation.

Sign in / Sign up

Export Citation Format

Share Document