Improved ductility by coupled motion of grain boundaries in nanocrystalline B2-FeCo alloys

A systematic study has been made of the effects of various heat treatments on the microstructures of several experimental high volume fraction γ’ precipitation hardened nickel-base alloys, after doping with ∼2 w/o Hf so as to improve the stress rupture life and ductility. The most significant microstructural chan§e brought about by prolonged aging at temperatures in the range 1600°-1900°F was the decoration of grain boundaries with precipitate particles.Precipitation along the grain boundaries was first detected by optical microscopy, but it was necessary to use the scanning electron microscope to reveal the details of the precipitate morphology. Figure 1(a) shows the grain boundary precipitates in relief, after partial dissolution of the surrounding γ + γ’ matrix.

Download Full-text

Measurement of the Displacement Across a Coincidence Grain Boundary

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100078213 ◽

1977 ◽

Vol 35 ◽

pp. 124-125

Author(s):

J. W. Matthews ◽

W. M. Stobbs

Keyword(s):

Grain Boundary ◽

Grain Boundaries ◽

Stacking Fault ◽

The Other ◽

Measuring Technique ◽

High Angle ◽

Twin Boundaries ◽

Rigid Displacement ◽

Cubic Crystals ◽

Lattice Displacement

Many high-angle grain boundaries in cubic crystals are thought to be either coincidence boundaries (1) or coincidence boundaries to which grain boundary dislocations have been added (1,2). Calculations of the arrangement of atoms inside coincidence boundaries suggest that the coincidence lattice will usually not be continuous across a coincidence boundary (3). There will usually be a rigid displacement of the lattice on one side of the boundary relative to that on the other. This displacement gives rise to a stacking fault in the coincidence lattice.Recently, Pond (4) and Smith (5) have measured the lattice displacement at coincidence boundaries in aluminum. We have developed (6) an alternative to the measuring technique used by them, and have used it to find two of the three components of the displacement at {112} lateral twin boundaries in gold. This paper describes our method and presents a brief account of the results we have obtained.

Download Full-text

Lattice Imaging of Grain Boundaries in Ceramics

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100078171 ◽

1977 ◽

Vol 35 ◽

pp. 114-115

Author(s):

D. R. Clarke ◽

G. Thomas

Keyword(s):

Mechanical Properties ◽

High Temperature ◽

Silicon Nitride ◽

Grain Boundaries ◽

High Temperature Strength ◽

Current Interest ◽

Lattice Imaging ◽

Special Significance ◽

Structural Applications ◽

Refractory Ceramics

Grain boundaries have long held a special significance to ceramicists. In part, this has been because it has been impossible until now to actually observe the boundaries themselves. Just as important, however, is the fact that the grain boundaries and their environs have a determing influence on both the mechanisms by which powder compaction occurs during fabrication, and on the overall mechanical properties of the material. One area where the grain boundary plays a particularly important role is in the high temperature strength of hot-pressed ceramics. This is a subject of current interest as extensive efforts are being made to develop ceramics, such as silicon nitride alloys, for high temperature structural applications. In this presentation we describe how the techniques of lattice fringe imaging have made it possible to study the grain boundaries in a number of refractory ceramics, and illustrate some of the findings.

Download Full-text