Glass fiber–reinforced polymer tubes filled with steel-reinforced high-strength concrete are proposed as glass fiber–reinforced polymer–steel-reinforced high-strength concrete composite members. Eccentric compression is a typical loading scenario for such column members in practice. Experimental investigation on eight glass fiber–reinforced polymer tubes filled with steel–reinforced high-strength concrete columns subjected to eccentric compression was conducted. The effects of fiber orientation, thickness of glass fiber–reinforced polymer tube, slenderness ratio of columns, and loading eccentricity were investigated. It was found that the compression bearing capacity of glass fiber–reinforced polymer–steel-reinforced high-strength concrete columns increased with the decrease in the fiber tangle angle and the increase in the thickness of the glass fiber–reinforced polymer tube but reduced with the increase in the eccentricity and the slenderness ratio. Corresponding formulas were developed based on the nonlinear full-process analysis theory to describe the compression behavior of glass fiber–reinforced polymer–steel-reinforced high-strength concrete under eccentric loading. Good agreement was found through the comparison between the theoretical and the experimental results. The validated modeling approach was, therefore, employed to develop a parametric analysis that can be used to provide valuable guidance for practical application and further research on such structural members.
Mechanical Behavior of High Strength Concrete Reinforced with Glass Fiber Reinforced Polymer