Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite

2013 ◽  
Vol 48 ◽  
pp. 51-58 ◽  
Author(s):  
Daniel Scida ◽  
Mustapha Assarar ◽  
Christophe Poilâne ◽  
Rezak Ayad
Keyword(s):  
Epoxy Composite ◽  
Flax Fibre ◽  
Damage Mechanisms ◽  
Hygrothermal Ageing

scholarly journals Enhancement of Mechanical Properties of Flax-Epoxy Composite with Carbon Fibre Hybridisation for Lightweight Applications

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 109 ◽  
Author(s):  
Hom Nath Dhakal ◽  
Mohini Sain
Keyword(s):  
Carbon Fibre ◽  
Tensile Properties ◽  
Composite Laminates ◽  
Failure Modes ◽  
Epoxy Composite ◽  
Hybrid Composites ◽  
Environmental Scanning Electron Microscopy ◽  
Tensile Modulus ◽  
Tensile Tests ◽  
Flax Fibre

The effect of unidirectional (UD) carbon fibre hybridisation on the tensile properties of flax fibre epoxy composite was investigated. Composites containing different fibre ply orientations were fabricated using vacuum infusion with a symmetrical ply structure of 0/+45/−45/90/90/−45/+45/0. Tensile tests were performed to characterise the tensile performance of plain flax/epoxy, carbon/flax/epoxy, and plain carbon/epoxy composite laminates. The experimental results showed that the carbon/flax fibre hybrid system exhibited significantly improved tensile properties over plain flax fibre composites, increasing the tensile strength from 68.12 MPa for plain flax/epoxy composite to 517.66 MPa (670% increase) and tensile modulus from 4.67 GPa for flax/epoxy to 18.91 GPa (305% increase) for carbon/flax hybrid composite. The failure mechanism was characterised by examining the fractured surfaces of tensile tested specimens using environmental scanning electron microscopy (E-SEM). It was evidenced that interactions between hybrid ply interfaces and strain to failure of the reinforcing fibres were the critical factors for governing tensile properties and failure modes of hybrid composites.

Flexural and impact properties of flax fibre reinforced epoxy composite with nano TiO2 addition

2018 ◽  
Vol 5 (11) ◽  
pp. 24862-24870 ◽  
Author(s):  
Vishnu Prasad ◽  
M.A. Joseph ◽  
K. Sekar ◽  
Mubarak Ali
Keyword(s):  
Epoxy Composite ◽  
Flax Fibre ◽  
Nano Tio2 ◽  
Impact Properties ◽  
Tio2 Addition

Interlaminar fracture toughness of flax-epoxy composites

2016 ◽  
Vol 36 (2) ◽  
pp. 121-136 ◽  
Author(s):  
F Bensadoun ◽  
I Verpoest ◽  
AW Van Vuure
Keyword(s):  
Fracture Toughness ◽  
Epoxy Composite ◽  
Flax Fibre ◽  
Epoxy Composites ◽  
Mode I ◽  
Mode Ii ◽  
Interlaminar Fracture Toughness ◽  
Interlaminar Fracture ◽  
Brittle Polymer ◽  
Tensile Toughness

The purpose of this study was to determine the influence of fibre architectures on the interlaminar fracture toughness and tensile toughness of flax fibre epoxy composites. The fracture toughness was investigated for both Mode I (GIC) and Mode II (GIIC) for seven flax-epoxy architectures: one plain weave, two twill 2 × 2 weaves, a quasi-unidirectional and a unidirectional architecture, the UD’s being tested in both [0,90] and [90,0] composite lay-ups. The results of the Mode I and Mode II showed promising results of the flax-epoxy composite performance. The addition of flax fibre increases the GIC and GIIC of the composites over that of the unreinforced brittle polymer by at least two to three times. Further improvements are made with the use of woven textiles. The tensile toughness was found to be a good indicator of the capacity of a material to sustain perforation or non-perforation impact.

Sign in / Sign up

Export Citation Format

Share Document