Super-high bonding strength of polyphenylene sulfide-aluminum alloy composite structure achieved by facile molding methods

Micropores were formed on the surfaces of stainless steel (SUS) by sandblasting methods and Apatite Nuclei (AN) were formed in the pores. By this treatments, a bioactive SUS was fabricated. Apatite-forming ability of the SUS was evaluated by immersing in an acellular simulated body fluid. Formation of bonelike apatite was induced on the surface of the SUS within 1 day. High bonding strength of the bonelike apatite layer was achieved by a mechanical interlocking effect between the bonelike apatite formed in the pores and the SUS specimen.

Download Full-text

Microstructure, microhardness and tribological behavior of Al2O3 reinforced A380 aluminum alloy composite coatings prepared by cold spray technique

Surface and Coatings Technology ◽

10.1016/j.surfcoat.2018.07.039 ◽

2018 ◽

Vol 350 ◽

pp. 391-400 ◽

Cited By ~ 18

Author(s):

Xiang Qiu ◽

Naeem ul Haq Tariq ◽

Ji-qiang Wang ◽

Jun-rong Tang ◽

Lawrence Gyansah ◽

...

Keyword(s):

Aluminum Alloy ◽

Cold Spray ◽

Tribological Behavior ◽

Composite Coatings ◽

Alloy Composite ◽

Spray Technique

Download Full-text

Deformation and fracture of a particle-reinforced aluminum alloy composite: Part I. Experiments

Metallurgical and Materials Transactions A ◽

10.1007/s11661-000-0035-0 ◽

2000 ◽

Vol 31 (3) ◽

pp. 921-936 ◽

Cited By ~ 3

Author(s):

A. B. Pandey ◽

B. S. Majumdar ◽

D. B. Miracle

Keyword(s):

Aluminum Alloy ◽

Alloy Composite ◽

Composite Part ◽

Deformation And Fracture

Download Full-text

Evolution of texture during hot rolling of aluminum borate whisker-reinforced 6061 aluminum alloy composite

Materials Science and Engineering A ◽

10.1016/j.msea.2010.12.103 ◽

2011 ◽

Vol 528 (7-8) ◽

pp. 3243-3248 ◽

Cited By ~ 9

Author(s):

S.C. Xu ◽

L.D. Wang ◽

P.T. Zhao ◽

W.L. Li ◽

Z.W. Xue ◽

...

Keyword(s):

Aluminum Alloy ◽

Hot Rolling ◽

Aluminum Borate ◽

Alloy Composite ◽

6061 Aluminum Alloy

Download Full-text

Polymer-Based Repair Mortar Containing Waste Perlite Powder

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.898.73 ◽

2021 ◽

Vol 898 ◽

pp. 73-79

Author(s):

Radek Hermann ◽

Jakub Hodul ◽

Aleš Jakubík

Keyword(s):

Mechanical Properties ◽

Bonding Strength ◽

Building Materials ◽

Expanded Perlite ◽

High Bonding Strength ◽

Repair Mortar ◽

Very High

This paper deals with the problematics of utilization of waste perlite from production of expanded perlite in polymer-based material. The goal of this paper is to develop repair mortar containing as high amount of waste perlite as possible as substitution for filler. The resulting mortar exhibits very high physical-mechanical properties such as high bonding strength to a large variety of building materials. The microstructure and the re-dispersibility of filler were also studied.

Download Full-text

Transient Liquid Phase Bonding of Semi-Solid Metal 7075 Aluminum Alloy using ZA27 Zinc Alloy Interlayer

Metals ◽

10.3390/met8080637 ◽

2018 ◽

Vol 8 (8) ◽

pp. 637 ◽

Cited By ~ 1

Author(s):

Chaiyoot Meengam ◽

Yongyuth Dunyakul ◽

Dech Maunkhaw ◽

Suppachai Chainarong

Keyword(s):

Aluminum Alloy ◽

Liquid Phase ◽

Bonding Strength ◽

Transient Liquid Phase ◽

Solid Metal ◽

Bonding Time ◽

Zinc Alloy ◽

Transient Liquid Phase Bonding ◽

Bonding Zone ◽

Semi Solid

Transient Liquid Phase Bonding (TLPB) process of semi-solid metal 7075 aluminum alloys (SSM7075) using 50 μm thick of ZA27 zinc alloys as interlayers for the experiment were carried out under bonding temperatures of 480 and 540 °C and bonding times of 30, 60, 90 and 120 min respectively. In the bonding zone, the semi-solid state of ZA27 zinc alloy interlayers were diffused into the SSM7075 aluminum alloy. Examination of the bonding zone using Scanning Electron Microscope (SEM) and Energy-dispersive X-ray spectroscopy (EDS) showed that the precipitation of the intermetallic compound of η(Zn–Al–Cu), β(Al2Mg3Zn3), T′(Zn10Al35Cu55) and MgZn2 were formed in the bonding zone. The better homogenized microstructure in the bonding zone was formed when increasing bonding time and bonding temperature. The highest bonding strength was recorded at 17.44 MPa and average hardness was at 87.67 HV with the bonding time of 120 min and temperature at 540 °C. Statistically, the coefficient of determination analysis of bonding strength data was at 99.1%.

Download Full-text