Pervious high-calcium fly ash geopolymer concrete

2012 ◽  
Vol 30 ◽  
pp. 366-371 ◽  
Author(s):  
Tawatchai Tho-in ◽  
Vanchai Sata ◽  
Prinya Chindaprasirt ◽  
Chai Jaturapitakkul
Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 900
Author(s):  
Chamila Gunasekara ◽  
Peter Atzarakis ◽  
Weena Lokuge ◽  
David W. Law ◽  
Sujeeva Setunge

Despite extensive in-depth research into high calcium fly ash geopolymer concretes and a number of proposed methods to calculate the mix proportions, no universally applicable method to determine the mix proportions has been developed. This paper uses an artificial neural network (ANN) machine learning toolbox in a MATLAB programming environment together with a Bayesian regularization algorithm, the Levenberg-Marquardt algorithm and a scaled conjugate gradient algorithm to attain a specified target compressive strength at 28 days. The relationship between the four key parameters, namely water/solid ratio, alkaline activator/binder ratio, Na2SiO3/NaOH ratio and NaOH molarity, and the compressive strength of geopolymer concrete is determined. The geopolymer concrete mix proportions based on the ANN algorithm model and contour plots developed were experimentally validated. Thus, the proposed method can be used to determine mix designs for high calcium fly ash geopolymer concrete in the range 25–45 MPa at 28 days. In addition, the design equations developed using the statistical regression model provide an insight to predict tensile strength and elastic modulus for a given compressive strength.


Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7109
Author(s):  
Wei Yang ◽  
Pinghua Zhu ◽  
Hui Liu ◽  
Xinjie Wang ◽  
Wei Ge ◽  
...  

Geopolymer binder is expected to be an optimum alternative to Portland cement due to its excellent engineering properties of high strength, acid corrosion resistance, low permeability, good chemical resistance, and excellent fire resistance. To study the sulfuric acid corrosion resistance of geopolymer concrete (GPC) with different binding materials and concentrations of sodium hydroxide solution (NaOH), metakaolin, high-calcium fly ash, and low-calcium fly ash were chosen as binding materials of GPC for the geopolymerization process. A mixture of sodium silicate solution (Na2SiO3) and NaOH solution with different concentrations (8 M and 12 M) was selected as the alkaline activator with a ratio (Na2SiO3/NaOH) of 1.5. GPC specimens were immersed in the sulfuric acid solution with the pH value of 1 for 6 days and then naturally dried for 1 day until 98 days. The macroscopic properties of GPC were characterized by visual appearance, compressive strength, mass loss, and neutralization depth. The materials were characterized by SEM, XRD, and FTIR. The results indicated that at the immersion time of 28 d, the compressive strength of two types of fly ash-based GPC increased to some extent due to the presence of gypsum, but this phenomenon was not observed in metakaolin-based GPC. After 98 d of immersion, the residual strength of fly ash based GPC was still higher, which reached more than 25 MPa, while the metakaolin-based GPC failed. Furthermore, due to the rigid 3D networks of aluminosilicate in fly ash-based GPC, the mass of all GPC decreased slightly during the immersion period, and then tended to be stable in the later period. On the contrary, in metakaolin-based GPC, the incomplete geopolymerization led to the compressive strength being too low to meet the application of practical engineering. In addition, the compressive strength of GPC activated by 12 M NaOH was higher than the GPC activated by 8 M NaOH, which is owing to the formation of gel depended on the concentration of alkali OH ion, low NaOH concentration weakened chemical reaction, and reduced compressive strength. Additionally, according to the testing results of neutralization depth, the neutralization depth of high-calcium fly ash-based GPC activated by 12 M NaOH suffered acid attack for 98 d was only 6.9 mm, which is the minimum value. Therefore, the best performance was observed in GPC prepared with high-calcium fly ash and 12 M NaOH solution, which is attributed to gypsum crystals that block the pores of the specimen and improve the microstructure of GPC, inhibiting further corrosion of sulfuric acid.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Ganesan Lavanya ◽  
Josephraj Jegan

This study presents an investigation into the durability of geopolymer concrete prepared using high calcium fly ash along with alkaline activators when exposed to 2% solution of sulfuric acid and 5% magnesium sulphate for up to 45 days. The durability was also assessed by measuring water absorption and sorptivity. Ordinary Portland cement concrete was also prepared as control concrete. The grades chosen for the investigation were M20, M40, and M60. The alkaline solution used for present study is the combination of sodium silicate and sodium hydroxide solution with the ratio of 2.50. The molarity of sodium hydroxide was fixed as 12. The test specimens were150×150×150 mm cubes,100×200 mm cylinders, and100×50 mm discs cured at ambient temperature. Surface deterioration, density, and strength over a period of 14, 28, and 45 days were observed. The results of geopolymer and ordinary Portland cement concrete were compared and discussed. After 45 days of exposure to the magnesium sulfate solution, the reduction in strength was up to 12% for geopolymer concrete and up to 25% for ordinary Portland cement concrete. After the same period of exposure to the sulphuric acid solution, the compressive strength decrease was up to 20% for geopolymer concrete and up to 28% for ordinary Portland cement concrete.


Author(s):  
Khattiya Chompoovong ◽  
Tanakorn Phoo-ngernkham ◽  
Satakhun Detphan ◽  
Chudapak Detphan ◽  
Sakonwan Hanjitsuwan ◽  
...  

2015 ◽  
Vol 27 (7) ◽  
pp. 04014198 ◽  
Author(s):  
Pattanapong Topark-Ngarm ◽  
Prinya Chindaprasirt ◽  
Vanchai Sata

Author(s):  
Athika Wongkvanklom ◽  
Patcharapol Posi ◽  
Apichit Kampala ◽  
Traitot Kaewngao ◽  
Prinya Chindaprasirt

2021 ◽  
pp. 103265
Author(s):  
Peem Nuaklong ◽  
Papassara Worawatnalunart ◽  
Pitcha Jongvivatsakul ◽  
Sawekchai Tangaramvong ◽  
Thanyawat Pothisiri ◽  
...  

2022 ◽  
Vol 1048 ◽  
pp. 412-419
Author(s):  
B. Vijaya Prasad ◽  
Arun P. Kumar ◽  
N. Anand ◽  
Paul Daniel Arumairaj ◽  
T. Dhilip ◽  
...  

The most important cause of the climate changes in the past few decades are due to the emission of CO2.It may be due to human or natural processes such as disposal of waste material from the thermal power plant, consuming natural resources or production of cement etc. Due to increase in infrastructure created the demand of more construction industries. Increasing importance of environmental protection and energy storage has led to the investigation of alternative binders to replace the cement. Geopolymers are an alternative binder for cement concrete production because of their superior mechanical properties. In the present investigation, for developing the Geopolymer concrete (GPC), high calcium fly ash is used as an alternative binder with Na2SiO3 and NaOH as alkaline liquids. Fresh and hardened properties of GPC are examined by appropriate experiments. Alkaline liquid to High calcium Fly ash ratio (AL: HCF) of 0.45, 0.55,0.6 and 0.65 are used with 8M of NaOH and the developed GPC is kept in ambient curing for 7 days, 28 days, and 56 days. It was observed that with an increase of AL to HCF ratio in the fresh GPC increased the workability of GPC. Increase of AL to HCF ratio in GPC mix increased the compressive strength, tensile strength and flexural strength up to a certain limit.


Sign in / Sign up

Export Citation Format

Share Document