Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash geopolymer concrete

2020 ◽  
Vol 252 ◽  
pp. 119797 ◽  
Author(s):  
Peem Nuaklong ◽  
Pitcha Jongvivatsakul ◽  
Thanyawat Pothisiri ◽  
Vanchai Sata ◽  
Prinya Chindaprasirt
2021 ◽  
Vol 2070 (1) ◽  
pp. 012184
Author(s):  
B Vijaya Prasad ◽  
N Anand ◽  
P D Arumairaj ◽  
M Sanath Kumar ◽  
T Dhilip ◽  
...  

Abstract Geopolymer concrete (GPC) is a Sustainable construction material, in which cement is completely replaced by Fly ash as binder. To control emission of CO2 during the production of cement, it is advisable to use alternate sustainable Cementitious material. The development of GPC become a major interest to use for in-situ and precast applications. The present study aims to develop High calcium fly ash based GPC with aid of alkaline liquids such as sodium Hydroxide (NaOH) and Sodium silicate (Na2SiO3). Different molarities i.e 4M, 6M, 8M and 10M are used to develop the GPC under ambient and oven curing process. In the present investigation the Fresh properties of GPC and Mechanical properties such as compressive strength, Tensile strength, Flexural strength and Elastic modulus of GPC are investigated. An increase of alkaline activator in in the mix decreased the workability of GPC. The developed GPC mix of 8M is found to be the optimum for gain in compressive strength. A polynomial relationship is obtained for the mechanical properties of GPC developed under ambient and oven curing. The development cost of GPC can be reduced up to 11.25 to 16.5% as compared with conventional concrete grade of M25.


2018 ◽  
Vol 174 ◽  
pp. 244-252 ◽  
Author(s):  
Peem Nuaklong ◽  
Vanchai Sata ◽  
Ampol Wongsa ◽  
Korb Srinavin ◽  
Prinya Chindaprasirt

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 900
Author(s):  
Chamila Gunasekara ◽  
Peter Atzarakis ◽  
Weena Lokuge ◽  
David W. Law ◽  
Sujeeva Setunge

Despite extensive in-depth research into high calcium fly ash geopolymer concretes and a number of proposed methods to calculate the mix proportions, no universally applicable method to determine the mix proportions has been developed. This paper uses an artificial neural network (ANN) machine learning toolbox in a MATLAB programming environment together with a Bayesian regularization algorithm, the Levenberg-Marquardt algorithm and a scaled conjugate gradient algorithm to attain a specified target compressive strength at 28 days. The relationship between the four key parameters, namely water/solid ratio, alkaline activator/binder ratio, Na2SiO3/NaOH ratio and NaOH molarity, and the compressive strength of geopolymer concrete is determined. The geopolymer concrete mix proportions based on the ANN algorithm model and contour plots developed were experimentally validated. Thus, the proposed method can be used to determine mix designs for high calcium fly ash geopolymer concrete in the range 25–45 MPa at 28 days. In addition, the design equations developed using the statistical regression model provide an insight to predict tensile strength and elastic modulus for a given compressive strength.


Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7109
Author(s):  
Wei Yang ◽  
Pinghua Zhu ◽  
Hui Liu ◽  
Xinjie Wang ◽  
Wei Ge ◽  
...  

Geopolymer binder is expected to be an optimum alternative to Portland cement due to its excellent engineering properties of high strength, acid corrosion resistance, low permeability, good chemical resistance, and excellent fire resistance. To study the sulfuric acid corrosion resistance of geopolymer concrete (GPC) with different binding materials and concentrations of sodium hydroxide solution (NaOH), metakaolin, high-calcium fly ash, and low-calcium fly ash were chosen as binding materials of GPC for the geopolymerization process. A mixture of sodium silicate solution (Na2SiO3) and NaOH solution with different concentrations (8 M and 12 M) was selected as the alkaline activator with a ratio (Na2SiO3/NaOH) of 1.5. GPC specimens were immersed in the sulfuric acid solution with the pH value of 1 for 6 days and then naturally dried for 1 day until 98 days. The macroscopic properties of GPC were characterized by visual appearance, compressive strength, mass loss, and neutralization depth. The materials were characterized by SEM, XRD, and FTIR. The results indicated that at the immersion time of 28 d, the compressive strength of two types of fly ash-based GPC increased to some extent due to the presence of gypsum, but this phenomenon was not observed in metakaolin-based GPC. After 98 d of immersion, the residual strength of fly ash based GPC was still higher, which reached more than 25 MPa, while the metakaolin-based GPC failed. Furthermore, due to the rigid 3D networks of aluminosilicate in fly ash-based GPC, the mass of all GPC decreased slightly during the immersion period, and then tended to be stable in the later period. On the contrary, in metakaolin-based GPC, the incomplete geopolymerization led to the compressive strength being too low to meet the application of practical engineering. In addition, the compressive strength of GPC activated by 12 M NaOH was higher than the GPC activated by 8 M NaOH, which is owing to the formation of gel depended on the concentration of alkali OH ion, low NaOH concentration weakened chemical reaction, and reduced compressive strength. Additionally, according to the testing results of neutralization depth, the neutralization depth of high-calcium fly ash-based GPC activated by 12 M NaOH suffered acid attack for 98 d was only 6.9 mm, which is the minimum value. Therefore, the best performance was observed in GPC prepared with high-calcium fly ash and 12 M NaOH solution, which is attributed to gypsum crystals that block the pores of the specimen and improve the microstructure of GPC, inhibiting further corrosion of sulfuric acid.


2012 ◽  
Vol 30 ◽  
pp. 366-371 ◽  
Author(s):  
Tawatchai Tho-in ◽  
Vanchai Sata ◽  
Prinya Chindaprasirt ◽  
Chai Jaturapitakkul

2019 ◽  
Vol 798 ◽  
pp. 364-369 ◽  
Author(s):  
Khemmakorn Gomonsirisuk ◽  
Parjaree Thavorniti

The aim of this work is to study the feasibility of preparation of fly ash based geopolymer using sodium water glass from agricultural waste as alternative activators. Rice husk ash and bagasse ash were used as raw materials for producing sodium water glass solution. The sodium water glass were produced by mixing rice husk ash and bagasse ash with NaOH in ball mill and boiling. The prepared sodium water glass were analyzed and used in geopolymer preparation process. The geopolymer paste were prepared by adding the obtained water glass and NaOH with fly ash. After cured at ambient temperature for 7 days, mechanical properties were investigated. Bonding and phases of the geopolymer were also characterized. The geopolymer from rice husk ash presented highest compressive strength about 23 MPa while the greatest for bagasse ash was about 16 MPa.


Sign in / Sign up

Export Citation Format

Share Document