Physical properties measurement and performance analysis of membranes for a multi-stage planar membrane dehumidifier

Objectives of this study were analyze fish auction participant satisfaction to auction services in TPI Morodemak, analyze attributes effect, services that fit to service quality measurement, and analyzed fish auction participants perception to performance and importance for fish auction house Morodemak services. Used descriptive method and purposive sampling with 49 respondents consists of commercial fishmongers, traditional fishmongers, purse seine owners, and boat lift net owners as fish auction participant. Satisfication measurement used Customer Satisfication Index (CSI), Importance and Performance Analysis (IPA) and gap analysis. Results from this study were value CSI 20% (0.2) indicate the auction participants dissatisfied with the services provided, IPA show there are four attributes should be develop, two elements have not been completed based on measurement requirements of service satisfaction, gap value average -0.05 means the auction participants were not satisfied with the performance of TPI services because the performance value was lower than the importance value.

Download Full-text

TANGGAPAN WAJIB PAJAK TERHADAP KUALITAS PELAYANAN DILIHAT DARI TINGKAT KEPENTINGAN DAN KINERJA PADA KANTOR PELAYANAN PAJAK KOTA BOGOR

Jurnal Ilmiah Binaniaga ◽

10.33062/jib.v2i01.199 ◽

2018 ◽

Vol 2 (01) ◽

pp. 14

Author(s):

Eddy Supardi

Keyword(s):

Performance Analysis ◽

Service Quality ◽

Descriptive Analysis ◽

Good Work ◽

Satisfaction Level ◽

Quality Service ◽

Analysis Method ◽

And Performance ◽

Personal Tax

The Tax Payer obidience in fulfiling their taxation obligation will be influenced a lot by the satisfaction level toward the service fiscus. The aim of this observation is to know the response of Tax Payer toward service quality through importance and performance. The population which become the object of this observation is the personal Tax Payer registered in Bogor Tax Service Office and the number of respondents taken as the sample are 100 respondents with Slovin formula. The analysis method used is descriptive analysis and importance-performance analysis. The result of this observation will be able to be used as one of the input to Bogor Tax Service Office in improving the quality service and for the following observation, especially those who take the same object as the observation in order to improve the quality service to the Tax Payer based on the service of its working way which is felt less. Otherwise it is important for The Tax Payer, maintaining the good work or balancing the service quality based on the working way which is evaluated less important by The Taxe Payer, but has been done reasonably well or very well by The Service Office

Download Full-text

Design and Performance Analysis of 3.4 GHz Rectangular Microstrip Patch Antenna for Wireless Communication Systems

International Journal on Communications Antenna and Propagation (IRECAP) ◽

10.15866/irecap.v7i1.11423 ◽

2017 ◽

Vol 7 (1) ◽

pp. 80 ◽

Cited By ~ 1

Author(s):

Ahmed Al Amin ◽

Md. Shoriful Islam ◽

M. A. Masud ◽

N. H. Khan ◽

J. W. A. Zavala ◽

...

Keyword(s):

Performance Analysis ◽

Wireless Communication ◽

Patch Antenna ◽

Communication Systems ◽

Microstrip Patch Antenna ◽

Wireless Communication Systems ◽

Microstrip Patch ◽

Rectangular Microstrip Patch Antenna ◽

And Performance

Download Full-text

Techniques for Determining the Parameters of a Two-Dimensional Tire Model for the Study of Ride Comfort

Tire Science and Technology ◽

10.2346/1.2137540 ◽

1997 ◽

Vol 25 (3) ◽

pp. 187-213 ◽

Cited By ~ 7

Author(s):

F. Mancosu ◽

G. Matrascia ◽

F. Cheli

Keyword(s):

Physical Properties ◽

Ride Comfort ◽

Dynamic Test ◽

Longitudinal Direction ◽

Tire Model ◽

Rigid Ring ◽

Ring Model ◽

Mass Moment ◽

A New Technique ◽

And Performance

Abstract A rigid ring model of the tire for the study of in-plane dynamics and a new technique for determining the parameters of the model are presented in this paper. This model can be used for studying the comfort of vehicles, problems of driving, and braking problems in the longitudinal direction. Comparison with finite element models shows that the rigid ring model of the tire is capable of describing the in-plane eigenmode shapes in the frequency range of 0–130 Hz. The well-known “brush model,” integrated into the tire model, is introduced to take into account the slide phenomena in the contact patch. The parameters of the model can be correlated with the physical properties of the tire so that designers can take advantage of such a correlation in the development of new tires in terms of time, cost, and performance. The technique used to determine the parameters of the model for some automobile tires include the direct measurements of some physical properties (mass, moment of inertia, stiffness) and a method of identification applied on the results from a dynamic test. The model is able to predict experimental data in terms of natural frequencies and relative dampings. Results from the application of this technique on two tires are reported.

Download Full-text