scholarly journals Influence of nature of catalyst on biodiesel synthesis via irradiation-aided transesterification of waste cooking oil-honne seed oil blend: Modeling and optimization by Taguchi design method

2021 ◽  
pp. 100119
Author(s):  
Olayomi Abiodun Falowo ◽  
Oluwakemi Esther Apanisile ◽  
Adesola Oluwadamilola Aladelusi ◽  
Ayooluwa Emmanuel Adeleke ◽  
Mahamudat Abiodum Oke ◽  
...  
Keyword(s):  
Seed Oil ◽  
Design Method ◽  
Waste Cooking Oil ◽  
Taguchi Design ◽  
Modeling And Optimization ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Oil Blend

scholarly journals Konsentrasi Katalis dan Suhu Optimum pada Reaksi Esterifikasi menggunakan Katalis Zeolit Alam Aktif (ZAH) dalam Pembuatan Biodiesel dari Minyak Jelantah

2013 ◽  
Vol 14 (3) ◽  
pp. 219 ◽  
Author(s):  
Dwi Kartika ◽  
Senny Widyaningsih
Keyword(s):  
Physical Properties ◽  
Natural Zeolite ◽  
Oil And Gas ◽  
Catalyst Concentration ◽  
Waste Cooking Oil ◽  
Effect Of Temperature ◽  
Molar Ratio ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Directorate General

Transesterification of waste cooking oil into biodiesel using KOH catalyst with and without esterification process usingactivated natural zeolite (ZAH) catalyst has been carried out. Activation of the zeolite was done by refluxing with HCl 6Mfor 30 min, followed calcining and oxydized at 500oC for 2 hours, consecutively. The transesterification without esterificationprocess were done using KOH catalyst 1% (w/w) from oil and methanol weight and oil/methanol molar ratio 1:6 at 60oC. Theesterification reaction was also done using ZAH catalyst then continued by transesterification using KOH catalyst inmethanol media. In order to study the effect of ZAH catalyst concentration at constant temperature, the catalysts werevaried, i.e. 0, 1, 2, and 3% (w/w). To investigate the effect of temperature, the experiments were done at various temperaturefrom 30, 45, 60, and 70oC at constant catalyst concentration. The conversion of biodiesel was determined by 1H-NMRspectrometer and physical properties of biodiesel were determined using ASTM standard methods. The results showedthat the transesterification using KOH catalyst without esterification produced biodiesel conversion of 53.29%. The optimumcondition of biodiesel synthesis via esterification process were reached at 60oC and concentration of ZAH catalyst of2% (w/w), that could give biodiesel conversion = 100.00%. The physical properties were conformed with biodiesel ASTM2003b and Directorate General of Oil and Gas 2006 specification.

scholarly journals Evaluation of Shell-Derived Calcium Oxide Catalysts for the Production of Biodiesel Esters from Cooking Oils

2021 ◽  
pp. 20-27
Author(s):  
Ngee Sing Chong ◽  
Francis Uchenna Okejiri ◽  
Saidi Abdulramoni ◽  
Shruthi Perna ◽  
Beng Guat Ooi
Keyword(s):  
Calcium Oxide ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
X Ray ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Cooking Oils ◽  
The Cost ◽  
Percentage Conversion

Due to the high cost of feedstock and catalyst in biodiesel production, the viability of the biodiesel industry has been dependent on government subsidies or tax incentives. In order to reduce the cost of production, food wastes including eggshells and oyster shells have been used to prepare calcium oxide (CaO) catalysts for the transesterification reaction of biodiesel synthesis. The shells were calcined at 1000 °C for 4 hours to obtain CaO powders which were investigated as catalysts for the transesterification of waste cooking oil. The catalysts were characterized by Fourier Transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF) spectroscopy. Reaction parameters such as methanol-to-oil molar ratio, CaO catalyst concentration, and reaction time were evaluated and optimized for the percentage conversion of cooking oil to biodiesel esters. The oyster-based CaO showed better catalytic activity when compared to the eggshell-based CaO under the same set of reaction conditions.

scholarly journals Effect of Mixed Commercial Cold Flow Improvers on Flow Properties of Biodiesel from Waste Cooking Oil

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1094
Author(s):  
Siyu Nie ◽  
Leichang Cao
Keyword(s):  
Design Method ◽  
Uniform Design ◽  
Waste Cooking Oil ◽  
Cold Filter Plugging Point ◽  
Depressing Effect ◽  
Obvious Effect ◽  
Cold Flow ◽  
Cooking Oil ◽  
Uniform Design Method ◽  
Solidifying Point

The uniform design method was used to screen the solidifying point depressing effects of 18 traditional diesel cold flow improvers on biodiesel derived from waste cooking oil. The cold flow improvers with good effects were selected for orthogonal optimization. Finally, the mixed cold flow improver (CFI) with the best depressing effect was selected to explore its depressing mechanism for biodiesel. The results show that the typical CFIs such as A132, A146, 10-320, 10-330, A-4, CS-1, AH-BSFH, Haote, T1804D, and HL21 all have a certain solidifying point depressing effect on biodiesel, while other cold flow improvers had no obvious effect. Amongst them, 10-330 (PMA polymer) and AH-BSFH (EVA polymer) had better solidifying point depressing effects over others, both of which reduced the solidifying point (SP) of biodiesel by 4 °C and the cold filter plugging point (CFPP) by 2 °C and 3 °C, respectively. From the orthogonal mixing experiment, it can be seen that the combination of 10-330 and AH-BSFH at a mass ratio of 1:8 had the best depressing effect, reducing the solidifying point and cold filter plugging point of biodiesel by 5 °C and 3 °C, respectively. Orthogonal analysis showed that when used in combination, AH-BSFH had a greater impact on the solidifying point, while the ratio of the combination had a greater impact on the cold filter plugging point.

scholarly journals Biodiesel Synthesis from Waste Cooking Oil using Heterogeneous Catalyst from Corncob Ash Impregnated with KOH

2019 ◽  
Vol 1175 ◽  
pp. 012281 ◽  
Author(s):  
Taslim ◽  
Boy Andika Sinaga ◽  
Monica Nathalia Sihaloho ◽  
Iriany ◽  
Okta Bani
Keyword(s):  
Heterogeneous Catalyst ◽  
Waste Cooking Oil ◽  
Cooking Oil ◽  
Biodiesel Synthesis

scholarly journals Modification of CaO Catalyst with Impregnation Method Using KoH in Biodiesel Synthesis from Waste Cooking Oil

2019 ◽  
Vol 19 (2) ◽  
pp. 62
Author(s):  
Syarifuddin Oko ◽  
Andri Kurniawan
Keyword(s):  
Surface Area ◽  
Catalyst Activity ◽  
Waste Cooking Oil ◽  
Raw Material ◽  
Impregnation Method ◽  
Wet Impregnation ◽  
Cooking Oil ◽  
Eds Analysis ◽  
Biodiesel Synthesis ◽  
Egg Shells

Chicken eggshells can be used as raw material in the manufacture of CaO catalysts. Increased CaO catalyst activity can be done by the impregnation method. The purpose of this study was to determine the effect of %K on the wet impregnation of CaO catalyst using KOH and to find out the impregnation catalyst (CaO / K2O) on the biodiesel yield. Prepared chicken egg shells were calcined at 900oC for 3 hours. Then the CaO obtained was impregnated using KOH with a variation of % K (5%, 7%, 9% and 12% (w / w)) while heated at 85oC. The impregnation product was calcined at 600oC for 5 hours. The impregnation catalyst (CaO K2O) was applied to the biodiesel synthesis through a transesterification reaction with a mole ratio of 1:12 waste cooking oil: methanol, the amount of catalyst was 1.5% at a reaction temperature of 70°C for 2.5 hours. Based on the results of SEM-EDS analysis, the highest K2O at 7% K was 21.99%), while the highest CaO content was at 9% K by 81.53%. For the highest surface area analysis at 7% K with a surface area of 71.22 m2 / g, alkalinity was 2.59 mmol / g. The best biodiesel was obtained with a yield of 87.17%, kinematic viscosity of 2.89 cSt, water content of 0.032%, density of 0.819 g/ml, methyl ester level of 99.39%.

scholarly journals Effect of Synthesis Method on the Catalytic Performance of Ca-Mg-Al Mixed Metal Oxide Nanocatalyst for Biodiesel Production from Waste Cooking Oil

2021 ◽  
pp. 13-26
Author(s):  
Mansoor Anbia ◽  
Sotoudeh Sedaghat ◽  
Samira Saleh ◽  
Sholeh Masoomi
Keyword(s):  
Metal Oxide ◽  
Oxide Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Mixed Metal Oxide ◽  
Metal Oxide Catalyst ◽  
X Ray ◽  
Mixed Metal ◽  
Cooking Oil ◽  
Biodiesel Synthesis

The synthesized nanomaterials by two different methods were used as a catalyst in the transesterification of waste cooking oil to produce biodiesel. For both environmental and economic reasons, it is beneficial to produce biodiesel from waste cooking oils. It is desirable to help solve waste oil disposal by utilizing its oils as an inexpensive starting material in biodiesel synthesis. The structure, morphology, and surface properties of resulting nanocatalysts were characterized by X-ray Fluorescence Spectroscopy (XRF), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive X-ray Spectroscopy (EDX) and N2 adsorption-desorption isotherms. The synthesized nanocatalysts' efficiency in the production of biodiesel was studied by Gas Chromatography (GC) as well as leaching amounts of surface active components of each catalyst investigated by the EDX technique. The reactions were performed at 65°C using a 9:1 methanol to oil ratio for 3 h. The results indicate that the impregnated mixed metal oxide catalyst ( Ca-MgAl) shows a higher surface area and better mechanical strength than the totally co-precipitated mixed metal oxide catalyst (CaMgAl(O)). Although both of the fully co-precipitated and impregnated catalysts represented about 90% of fatty acid methyl esters (FAME) yield the leaching of active calcium component was significantly reduced from 45.8% in precipitated CaMgAl(O) to 8% for the impregnated Ca-MgAl catalyst. This improved structure represents the advantage of the impregnation technique to co-precipitation procedure for fabrication of robust nanostructures.

Sign in / Sign up

Export Citation Format

Share Document