scholarly journals Sequentially recover heavy metals from smelting wastewater using bioelectrochemical system coupled with thermoelectric generators

2020 ◽  
Vol 205 ◽  
pp. 111174
Author(s):  
Chenbing Ai ◽  
Zhang Yan ◽  
Shanshan Hou ◽  
Qiang Huo ◽  
Liyuan Chai ◽  
...  
2020 ◽  
Vol 136 ◽  
pp. 107596
Author(s):  
Jingran Zhang ◽  
Yanqing Liu ◽  
Yilun Sun ◽  
Hui Wang ◽  
Xian Cao ◽  
...  

2022 ◽  
Vol 334 ◽  
pp. 08006
Author(s):  
Martí Aliaguilla ◽  
Daniele Molognoni ◽  
Pau Bosch-Jimenez ◽  
Eduard Borràs

Industrial activity has resulted in heavy metals anthropogenic contamination of groundwater, especially in industrial or mining areas. Bioelectrochemical systems (BES) can be used for metals removal and recovery from aqueous solutions. In the framework of GREENER project, double-chamber BES have been adopted to treat groundwater from industrial sites containing copper, nickel and zinc (Cu, Ni and Zn), among other contaminants. Two operation modes, (i) short-circuited microbial fuel cell (MFC), and (ii) power supply driven microbial electrolysis cell (MEC, poisoning the cathode at -0.4 V vs. Ag/AgCl), were studied for metals removal at lab-scale. Two control reactors were run to evaluate metals adsorption on cathodes and membranes, and the effect of anolyte composition. Synthetic water containing different concentrations of Cu, Ni and Zn were treated, and metals removal pathways were studied. MEC and MFC performed similarly and the highest removal efficiencies were 97.1±3.6%, 50.7±6% and 74,5% for Cu, Ni and Zn respectively, from initial concentrations in the range of 1.1-1.5 mM.


2021 ◽  
Author(s):  
Xueming Zhang ◽  
Shaohui Zhang ◽  
Tao Huang ◽  
Zhixin Jin

Abstract Low-grade ores, tailings and solid wastes contain small amounts of valuable heavy metals. Improper disposal of these results in the waste of resources and contamination of soil or groundwater. Accordingly, the treatment and recycling of low-grade ores, tailings and solid wastes attracted much attention recently. Bioelectrochemical system, an innovative technology for the removal and recovery of heavy metals, has been further developed and applied in recent years. In current study, the low-grade chalcopyrite was bioleached with the assistance of microbial fuel cells. Copper extraction along with electricity generation from the low-grade chalcopyrite were achieved in the column bioleaching process assisted by MFCs. Results showed that after 197 days bioleaching of low-grade chalcopyrite, 423.9 mg copper was extracted from 200 g low-grade chalcopyrite and the average coulomb production reached 1.75 C/d. The introduction of MFCs into bioleaching processes promoted the copper extraction efficiency by 2.7 times (3.62% vs. 1.33%), mainly via promoting ferrous oxidation, reducing ORP and stimulating bacterial growth. This work provides a feasible method for the treatment and recycling of low-grade ores, tailings and solid wastes. But balancing energy consumption of aeration and circulation frequency and chemicals consumption of acid to improve the copper extraction efficiency need further investigation.


2022 ◽  
Vol 205 ◽  
pp. 112467
Author(s):  
Charles Amanze ◽  
Xiaoya Zheng ◽  
Meilian Man ◽  
Zhaojing Yu ◽  
Chenbing Ai ◽  
...  

Author(s):  
Randall W. Smith ◽  
John Dash

The structure of the air-water interface forms a boundary layer that involves biological ,chemical geological and physical processes in its formation. Freshwater and sea surface microlayers form at the air-water interface and include a diverse assemblage of organic matter, detritus, microorganisms, plankton and heavy metals. The sampling of microlayers and the examination of components is presently a significant area of study because of the input of anthropogenic materials and their accumulation at the air-water interface. The neustonic organisms present in this environment may be sensitive to the toxic components of these inputs. Hardy reports that over 20 different methods have been developed for sampling of microlayers, primarily for bulk chemical analysis. We report here the examination of microlayer films for the documentation of structure and composition.Baier and Gucinski reported the use of Langmuir-Blogett films obtained on germanium prisms for infrared spectroscopic analysis (IR-ATR) of components. The sampling of microlayers has been done by collecting fi1ms on glass plates and teflon drums, We found that microlayers could be collected on 11 mm glass cover slips by pulling a Langmuir-Blogett film from a surface microlayer. Comparative collections were made on methylcel1ulose filter pads. The films could be air-dried or preserved in Lugol's Iodine Several slicks or surface films were sampled in September, 1987 in Chesapeake Bay, Maryland and in August, 1988 in Sequim Bay, Washington, For glass coverslips the films were air-dried, mounted on SEM pegs, ringed with colloidal silver, and sputter coated with Au-Pd, The Langmuir-Blogett film technique maintained the structure of the microlayer intact for examination, SEM observation and EDS analysis were then used to determine organisms and relative concentrations of heavy metals, using a Link AN 10000 EDS system with an ISI SS40 SEM unit. Typical heavy microlayer films are shown in Figure 3.


1993 ◽  
Vol 88 (3) ◽  
pp. 522-529 ◽  
Author(s):  
Udo W. Stephan ◽  
Gunter Scholz
Keyword(s):  

2011 ◽  
Author(s):  
Parker Woody ◽  
Michael Zhang ◽  
Craig Pulsipher ◽  
Dawson Hedges ◽  
Bruce Brown

Sign in / Sign up

Export Citation Format

Share Document