Purpose
– The purpose of this paper is to present, the global behaviour of sandwich structures comprising cellular cores is predicted by finite element (FE) analysis. Two modelling approaches are investigated, providing different levels of accuracy; in both approaches, the sandwich structure is idealised as a layered stack with the skin modelled using shell elements; while the core is either modelled with fine detail using beam micro-elements representing the cell struts, or is modelled by three-dimensional solid elements after an appropriate core homogenisation.
Design/methodology/approach
– The applied homogenisation methodology, as well as the all important modelling issues are presented in detail. Experimental tests performed using a mass-drop testing machine are used for the successful validation of the simulation models.
Findings
– It was concluded that the core microscale models having detailed FE modelling of the core unit cells geometry with fine scale beam elements are suitable for the analysis of the core failure modes and the prediction of the basic core stiffness and strength properties. It was demonstrated that the homogenised core model provides significant advantages with respect to computing time and cost, although they require additional calculations in order to define the homogenised stress-strain curves.
Research limitations/implications
– Special microscale material tests are required for the determination of appropriate materials parameters of the core models, as steel selective laser melting (SLM) microstrut properties differ from the constitutive steel material ones, due to the core manufacturing SLM technique. Stress interactions were not taken into account in the homogenisation, as the applied core material model supports the introduction of independent stress-strain curves; however, the predicted load deflection results appeared to be very close to those obtained from the detailed core micromodels.
Originality/value
– The paper is original. The dynamic behaviour of conventional sandwich structures comprising conventional honeycomb type cores has been extensively studied, using simple mass-spring models, energy based models, as well as FE models. However, the response of sandwich panels with innovative SLM cellular cores has been limited. In the present paper, novel modelling approaches for the simulation of the structural response of sandwich panels having innovative open lattice cellular cores produced by SLM are investigated.
Metabolic modelling approaches for describing and engineering microbial communities