Evaluation of an actuated force plate-based robotic test setup to assess the slip resistance of footwear

SummaryA retrospective case series study was done to determine the long-term outcome of operations upon dogs treated for canine hip dysplasia by means of a triple pelvic osteotomy (TPO). Twentyfour dogs with bilateral hip dysplasia, that received a unilateral TPO between January 1988 and June 1995, were re-examined at the Ontario Veterinary College. The assessment included physical, orthopedic and lameness examinations, standard blood work, pelvic radiographs and force plate gait analysis. They were compared to bilaterally dysplastic dogs that had not been treated, and also to normal dogs. Force plate data analysis demonstrated a significant increase in peak vertical force (PVF) and mean vertical force over stance (MVF) in the limb that underwent surgical correction by means of a TPO, when compared to the unoperated hip. It was determined that performing a unilateral TPO on a young dysplastic dog resulted in greater forces and weight bearing being projected through the TPO corrected limb when compared to the unoperated limb.Dogs with bilateral hip dysplasia treated with a unilateral triple pelvic osteotomy (TPO) were assessed by force plate gait analysis, radiographs and orthopedic examination. There was a significant increase in hip Norberg angles over time, although degenerative changes did progress. Limbs that had been operated upon had significantly greater peak and mean ground reaction forces than limbs that had not received an operation.

Download Full-text

Rim Slip and Bead Fitment of Tires: Analysis and Design2

Tire Science and Technology ◽

10.2346/1.2169829 ◽

2006 ◽

Vol 34 (1) ◽

pp. 38-63 ◽

Cited By ~ 3

Author(s):

C. Lee

Keyword(s):

Pressure Distribution ◽

Contact Pressure ◽

Frictional Torque ◽

Finite Element Analyses ◽

Inflation Pressure ◽

Contact Pressure Distribution ◽

Design Modification ◽

Iterative Design ◽

Slip Resistance ◽

Braking Torque

Abstract A tire slips circumferentially on the rim when subjected to a driving or braking torque greater than the maximum tire-rim frictional torque. The balance of the tire-rim assembly achieved with weight attachment at certain circumferential locations in tire mounting is then lost, and vibration or adverse effects on handling may result when the tire is rolled. Bead fitment refers to the fit between a tire and its rim, and in particular, to whether a gap exists between the two. Rim slip resistance, or the maximum tire-rim frictional torque, is the integral of the product of contact pressure, friction coefficient, and the distance to the wheel center over the entire tire-rim interface. Analytical solutions and finite element analyses were used to study the dependence of the contact pressure distribution on tire design and operating attributes such as mold ring profile, bead bundle construction and diameter, and inflation pressure, etc. The tire-rim contact pressure distribution consists of two parts. The pressure on the ledge and the flange, respectively, comes primarily from tire-rim interference and inflation. Relative contributions of the two to the total rim slip resistance vary with tire types, depending on the magnitudes of ledge interference and inflation pressure. Based on the analyses, general guidelines are established for bead design modification to improve rim slip resistance and mountability, and to reduce the sensitivity to manufacturing variability. An iterative design and analysis procedure is also developed to improve bead fitment.

Download Full-text

Personal protective equipment. Footwear. Test method for slip resistance

10.3403/30163192 ◽

2007 ◽

Keyword(s):

Personal Protective Equipment ◽

Test Method ◽

Protective Equipment ◽

Slip Resistance

Download Full-text

A test setup with automated measurements for impulse voltage breakdown studies of gaseous insulation

11th International Symposium on High-Voltage Engineering (ISH 99) ◽

10.1049/cp:19990537 ◽

1999 ◽

Author(s):

S.K. Venkatesh

Keyword(s):

Test Setup ◽

Automated Measurements ◽

Impulse Voltage ◽

Voltage Breakdown

Download Full-text

INFLUENCE OF FOOT INSOLE ON THE GAIT PERFORMANCE IN SUBJECTS WITH FLAT FOOT DISORDER

Journal of Mechanics in Medicine and Biology ◽

10.1142/s0219519419500507 ◽

2019 ◽

Vol 19 (06) ◽

pp. 1950050

Author(s):

M. T. KARIMI ◽

R. B. TAHMASEBI ◽

B. SATVATI ◽

F. FATOYE

Keyword(s):

Range Of Motion ◽

Ankle Joint ◽

Lower Limb ◽

Walking Speed ◽

Force Plate ◽

Flat Foot ◽

Gait Performance ◽

Positive Effects ◽

Significant Difference ◽

Foot Disorder

Flat foot is the most common foot disorder that influences the alignment of the lower limb structure. It is controversial whether the use of foot insole influences kinetic and kinematic of the leg or not. Therefore, this study investigated the influence of foot insole on the gait performance in subjects with flat foot disorder. A group of flat foot subject was recruited into this study (the number of subjects was 15). The motion of the leg joints was determined using the Qualysis motion analysis system. Moreover, the force applied on the lower limb was recorded by a Kistler force plate. The range of motion of the lower limb joints, the moments applied on the lower limb joints and force transmitted through the leg were the parameters used in this study. The difference between these parameters during walking with and without insole was evaluated using the paired [Formula: see text]-test. Significant value was set at [Formula: see text]. There was no significant difference between the range of motion of ankle joint while walking with and without insole. However, the medial directed force applied on the leg decreased significantly [Formula: see text]. The use of foot insole did not influence the moments transmitted through the hip and knee joints. The walking speed of the subjects improved while walking with foot insole. Use of foot insole influenced the magnitude of the force applied on the leg and the adductor moment of ankle joint due to its influence on foot alignment. As the walking speed of the improved subjects follows the use of insole, it can be concluded that it may have a positive effects on the performance of flat foot subjects.

Download Full-text

The effect of proprioceptive training on postural control in people with diabetes: A randomized clinical trial comparing delivery at home, under supervision, or no training

Clinical Rehabilitation ◽

10.1177/0269215521989016 ◽

2021 ◽

pp. 026921552198901

Author(s):

Nathalia Cristina de Souza Borges ◽

Ariane Hidalgo Mansano Pletsch ◽

Mariana Barbosa Buzato ◽

Natalia Akemi Yamada Terada ◽

Fernanda Maria Ferreira da Cruz ◽

...

Keyword(s):

Type 2 Diabetes ◽

Postural Control ◽

Force Plate ◽

Outcome Variable ◽

Control Group ◽

Functional Tests ◽

Supervised Training ◽

Proprioceptive Training ◽

Home Training

Objective: Analyze postural control in the bipedal position as well as during gait and functional tests in patients with type 2 diabetes mellitus after supervised and unsupervised proprioceptive training. Design: A three-group randomized controlled trial. Setting: Physiotherapeutic Resources Lab, Department of Health Sciences, Ribeirão Preto Medical School, University of São Paulo Subjects: Eighty patients with type 2 diabetes allocated to three groups: control, home training, and supervised training. Interventions: The supervised and home training groups performed two weekly sessions of proprioceptive exercises for 12 weeks. The control group was not submitted to any of treatment. Main measures: Bipedal balance, gait, and performance on functional tests were evaluated before and after 12 weeks using the Balance Evaluation Systems Test (BESTest) and the force plate. Results: No significant improvements were found regarding postural control, gait, or performance on the functional tests, as evidenced by the inter-group comparisons of the total BESTest score [control: 90.7 (81.5–92.6); home training: 85.2 (77.8–90.3); supervised training: 88.4 (82.6–91.4), P > 0.05] as well as the tests performed on the force plate ( P > 0.05). The clinical effect size of the proposed intervention was less than 0.2, demonstrating no effect for the main outcome variable evaluated by the “Sensory Orientation” item of the BESTest and by the mCTSIB (pressure plate). Conclusions: The proposed proprioceptive training did not lead to improvements in postural control in patients with type 2 diabetes with no clinical signs of diabetic distal polyneuropathy when analyzed using the BESTest clinical evaluation and a force plate. Trial registration: NCT01861392 (clinicaltrials.gov).

Download Full-text

Review of the Upright Balance Assessment Based on the Force Plate

International Journal of Environmental Research and Public Health ◽

10.3390/ijerph18052696 ◽

2021 ◽

Vol 18 (5) ◽

pp. 2696

Author(s):

Baoliang Chen ◽

Peng Liu ◽

Feiyun Xiao ◽

Zhengshi Liu ◽

Yong Wang

Keyword(s):

Postural Balance ◽

Force Plate ◽

Assessment Method ◽

Balance Assessment ◽

Experimental Conditions ◽

Methodological Research ◽

Assessment Tests ◽

Wide Range ◽

Foot Posture ◽

Plate System

Quantitative assessment is crucial for the evaluation of human postural balance. The force plate system is the key quantitative balance assessment method. The purpose of this study is to review the important concepts in balance assessment and analyze the experimental conditions, parameter variables, and application scope based on force plate technology. As there is a wide range of balance assessment tests and a variety of commercial force plate systems to choose from, there is room for further improvement of the test details and evaluation variables of the balance assessment. The recommendations presented in this article are the foundation and key part of the postural balance assessment; these recommendations focus on the type of force plate, the subject’s foot posture, and the choice of assessment variables, which further enriches the content of posturography. In order to promote a more reasonable balance assessment method based on force plates, further methodological research and a stronger consensus are still needed.

Download Full-text