Nickel iron oxide (NiFe2O4) catalyst was prepared by the combustion reaction method and characterized by XRD, N2 adsorption/desorption, thermogravimetric analysis (TG), and temperature programmed reduction (TPR). The catalyst presented a mixture of oxides, including the NiFe2O4 spinel and specific surface area of 32.4 m2 g−1. The effect of NiFe2O4 catalyst on the supercritical water gasification (SCWG) of eucalyptus wood chips was studied in a batch reactor at 450 and 500 °C without catalyst and with 1.0 g and 2.0 g of catalyst and 2.0 g of biomass for 60 min. In addition, the recyclability of the catalyst under the operating conditions was also tested using recovered and recalcined catalysts over three reaction cycles. The highest amount of H2 was 25 mol% obtained at 450 °C, using 2 g of NiFe2O4 catalyst. The H2 mol% was enhanced by 45% when compared to the non-catalytic test, showing the catalytic activity of NiFe2O4 catalyst in the WGS and the steam reforming reactions. After the third reaction cycle, the results of XRD demonstrated formation of coke which caused the deactivation of the NiFe2O4 and consequently, a 13.6% reduction in H2 mol% and a 5.6% reduction in biomass conversion.
Catalytic supercritical water gasification of eucalyptus wood chips in a batch reactor