Preparation of poly(lactide)/lignin/silver nanoparticles composite films with UV light barrier and antibacterial properties

2018 ◽  
Vol 107 ◽  
pp. 1724-1731 ◽  
Author(s):  
Shiv Shankar ◽  
Jong-Whan Rhim ◽  
Keehoon Won
Keyword(s):  
Silver Nanoparticles ◽  
Uv Light ◽  
Composite Films ◽  
Antibacterial Properties ◽  
Light Barrier

Preparation of pectin/silver nanoparticles composite films with UV-light barrier and properties

2016 ◽  
Vol 92 ◽  
pp. 842-849 ◽  
Author(s):  
Shiv Shankar ◽  
Nattareya Tanomrod ◽  
Saroat Rawdkuen ◽  
Jong-Whan Rhim
Keyword(s):  
Silver Nanoparticles ◽  
Uv Light ◽  
Composite Films ◽  
Light Barrier

scholarly journals The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2605 ◽  
Author(s):  
A. Rozilah ◽  
C. N. Aiza Jaafar ◽  
S. M. Sapuan ◽  
I. Zainol ◽  
R. A. Ilyas
Keyword(s):  
Silver Nanoparticles ◽  
Composite Films ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Microscopic Analysis ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Ftir Analysis ◽  
Antibacterial Coatings ◽  
Biocomposite Films

Antibacterial sugar palm starch biopolymer composite films were developed and derived from renewable sources and inorganic silver nanoparticles (AgNPs) as main ingredients for antibacterial coatings. The composite films were produced by solution casting method and the mechanical and physicochemical properties were determined by tensile test, Fourier Transform Infrared (FTIR) analysis, thermal gravimetric analysis (TGA), antibacterial screening test and field emission scanning electron microscopy (FESEM) images. It was found that mechanical and antibacterial properties of biocomposite films were improved after the addition of AgNPs compared with the film without active metals. The weakness of neat biocomposite films was improved by incorporating inorganic AgNPs as a nanofiller in the films’ matrix to avoid bacterial growth. The results showed that the tensile strength ranged between 8 kPa and 408 kPa and the elasticity modulus was between 5.72 kPa and 9.86 kPa. The addition of AgNPs in FTIR analysis decreased the transmittance value, caused small changes in the chemical structure, caused small differences in the intensity peaks, and produced longer wavelengths. These active films increased the degradation weight and decomposition temperature due to the more heat-stable AgNPs. Meanwhile, the average inhibited areas measured were between 7.66 and 7.83 mm (Escherichia coli), 7.5 and 8.0 mm (Salmonella cholerasuis), and 0.1 and 0.5 mm for Staphylococcus aureus. From the microscopic analysis, it was observed that the average size of all microbes for 1 wt% and 4 wt% AgNPs ranged from 0.57 to 2.90 mm. Overall, 3 wt% AgNP nanofiller was found to be the best composition that fulfilled all the mechanical properties and had better antimicrobial properties. Thus, the development of an organic-inorganic hybrid of antibacterial biopolymer composite films is suitable for antibacterial coatings.

scholarly journals Improvement of the UV Barrier and Antibacterial Properties of Crosslinked Pectin/Zinc Oxide Bionanocomposite Films

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2403
Author(s):  
Karina Dyasti Hari ◽  
Coralia V. Garcia ◽  
Gye-Hwa Shin ◽  
Jun-Tae Kim
Keyword(s):  
Zinc Oxide ◽  
Zinc Oxide Nanoparticles ◽  
Uv Light ◽  
Antibacterial Properties ◽  
Antibacterial Effects ◽  
Zno Nps ◽  
Elongation At Break ◽  
Light Barrier ◽  
Bionanocomposite Films ◽  
And Staphylococcus Aureus

Pectin-based antibacterial bionanocomposite films were prepared by crosslinking with calcium chloride (CaCl2) and mixing with zinc oxide nanoparticles (ZnO-NPs) at various concentrations (0.5%, 1%, and 1.5% w/w, based on pectin). Crosslinking with 1% CaCl2 significantly (p < 0.05) improved the tensile strength of the pectin films, although their elongation at break was decreased. The UV-light barrier property of the pectin/ZnO bionanocomposite films was significantly (p < 0.05) improved with increasing ZnO-NP concentrations. In addition, the bionanocomposite films incorporating 1.5% ZnO-NPs showed excellent antibacterial effects against both Escherichia coli and Staphylococcus aureus, inhibiting over 99% of the bacteria. Therefore, the developed crosslinked pectin/ZnO bionanocomposite films show great potential as active packaging materials with excellent UV-blocking and antibacterial properties.

Green synthesised silver nanoparticles incorporated electrospun poly(methyl methacrylate) nanofibers with different architectures for ophthalmologic alternatives

2021 ◽  
Vol 36 (2) ◽  
pp. 93-110
Author(s):  
Princy Philip ◽  
Tomlal Jose ◽  
Sarath KS ◽  
Sunny Kuriakose
Keyword(s):  
Silver Nanoparticles ◽  
Methyl Methacrylate ◽  
Antibacterial Properties ◽  
Analytical Techniques ◽  
Morphological Properties ◽  
Gram Positive ◽  
Gram Negative ◽  
Poly Methyl Methacrylate ◽  
Antimicrobial Studies ◽  
Eye Problems

Silver nanoparticles with 5–10 nm diameters are synthesised using Couroupita guianensis flower extract. The synthesised silver nanoparticles found to show good antimicrobial activity against gram negative and gram positive bacteria. Poly(methyl methacrylate) nanofibers with pristine, surface roughened and coaxial hollow forms are prepared by electrospinning. The structural and morphological properties of these pure and structurally modified poly(methyl methacrylate) nanofibers are evidenced by various analytical techniques. The antimicrobial studies of poly(methyl methacrylate) nanofibers having different architectures incorporated with silver nanoparticles are carried out. It is found that, all the three forms of poly(methyl methacrylate) nanofibers incorporated with silver nanoparticles show antibacterial properties against both gram positive and gram negative bacteria. Among these, surface roughened poly(methyl methacrylate) nanofibers incorporated with silver nanoparticles show highest antibacterial activity than the other two structural forms. The present study offers an alternative to the existing optical lenses. People especially those who suffer from eye problems can protect their eyes in a better way from infectious agents by wearing optical lens made from C. guianensis stabilised silver nanoparticles incorporated poly(methyl methacrylate) nanofibers than that made from pure poly(methyl methacrylate) nanofibers or films.

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

Sign in / Sign up

Export Citation Format

Share Document