Study on the derivation of cassava residue and its application in surface sizing

2019 ◽  
Vol 128 ◽  
pp. 80-84 ◽  
Author(s):  
Tongtong Yun ◽  
Bo Pang ◽  
Jie Lu ◽  
Yanna Lv ◽  
Yi Cheng ◽  
...  
TAPPI Journal ◽  
2010 ◽  
Vol 9 (7) ◽  
pp. 15-21 ◽  
Author(s):  
JI-YOUNG LEE ◽  
CHUL-HWAN KIM ◽  
JEONG-MIN SEO ◽  
HO-KYUNG CHUNG ◽  
KYUNG-KIL BACK ◽  
...  

Eco-friendly cushioning materials were made with thermomechanical pulps (TMPs) from waste woods collected from local mountains in Korea, using a suction-forming method without physical pressing. The TMP cushions had superior shock-absorbing performance, with lower elastic moduli than expanded polystyrene (EPS) or molded pulp. Even though the TMP cushions made using various suction times had many voids in their inner fiber structure, their apparent densities were a little higher than that of EPS and much lower than that of molded pulp. The addition of cationic starch contributed to an increase in the elastic modulus of the TMP cushions without increasing the apparent density, an effect which was different from that of surface sizing with starch. In the impact test, the TMP cushions showed a more ductile pattern than the brittle EPS. The porosity of the TMP cushion was a little less than that of EPS and much greater than that of molded pulp. The porous structure of the TMP cushions contributed to their excellent thermal insulating capacity, which was equivalent to that of EPS. In summary, the TMP packing cushions showed great potential for surviving external impacts during product distribution.


TAPPI Journal ◽  
2009 ◽  
Vol 8 (2) ◽  
pp. 33-38 ◽  
Author(s):  
ANNA JONHED ◽  
LARS JÄRNSTRÖM

The aim of this study was to investigate the properties of hydrophobically modified (HM) quaterna-ry ammonium starch ethers for paper sizing. These starches possess temperature-responsive properties; that is, gelation or phase separation occurs at a certain temperature upon cooling. This insolubility of the HM starches in water at room temperature improved their performance as sizing agents. The contact angles for water on sized liner were substantially larger than on unsized liner. When the application temperature was well above the critical phase-separation temperature, larger contact angles were obtained for liner independently of pH compared with those at the lower application temperature. Cobb60 values for liner decreased upon surface sizing, with a low pH and high application temperature giving lower water penetration. Contact angles on greaseproof paper decreased upon sur-face sizing as compared to unsized greaseproof paper, independently of pH and temperature. Greaseproof paper showed no great difference between unsized substrates and substrates sized with HM starch at different pH. This is probably due to the already hydrophobic nature of greaseproof paper. However, the Cobb60 values increased at low pH and low application temperature. Surfactants were added to investigate how they affect the sized surface. Addition of surfactant reduces the contact angles, in spite of indications of complex formation.


1964 ◽  
Vol 18 (4) ◽  
pp. 161-168
Author(s):  
Ten Yoshii ◽  
Shigehiko Yoshioka ◽  
Keisaburo Tabuchi

2012 ◽  
Vol 66 (8) ◽  
pp. 844-851
Author(s):  
Mitsuhiro Yamazaki
Keyword(s):  

2017 ◽  
Vol 71 (4) ◽  
pp. 388-393
Author(s):  
Shiro Umeuchi

Animals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 307
Author(s):  
Yuhui Zheng ◽  
Yanyan Zhao ◽  
Shenglin Xue ◽  
Wei Wang ◽  
Yajing Wang ◽  
...  

The feeding value of replacing concentrate with cassava (Manihot esculenta) residue in the feed of Holstein cows was confirmed using an in vitro gas test. The treatments consisted of 0% (control, CON), 5%, 10%, 15%, 20%, 25%, and 30% inclusion of cassava residue in fermentation culture medium composed of buffer solution (50 mL) and filtrated rumen fluid (25 mL). The parameters analyzed included the kinetics of gas production and fermentation indexes. Forty-eight hours later, there were no significant differences on in vitro dry matter disappearance (IVDMD), pH, and microbial crude protein (MCP) content among treatments (p > 0.05). However, the “cumulative gas production at 48 h” (GP48), the “asymptotic gas production” (A), and the “maximum gas production rate” (RmaxG) all increased linearly or quadratically (p < 0.01). The GP48 was significantly higher in the 25% treatment compared to the other treatments, except for the 30% (p < 0.01). The A was significantly larger in the 25% treatment compared to the other treatments, except for the 20% and 30% (p < 0.01). The RmaxG was distinctly larger in the 25% treatment compared to other treatments (p < 0.01); moreover, the “time at which RmaxG is reached” (TRmaxG) and the “time at which the maximum rate of substrate degradation is reached” (TRmaxS) were significantly higher in the 25% treatment than the CON, 20%, and 30% treatments (p < 0.01). Additionally, the content of ammonia-N (NH3-N) in all treatments showed linearly and quadratically decreases (p < 0.01), whereas total volatile fatty acid (VFA), iso-butyrate, butyrate, and iso-valerate contents changed quadratically (p = 0.02, p = 0.05, p = 0.01, and p = 0.02, respectively); all of these values peaked in the 25% treatment. In summary, the 25% treatment was associated with more in vitro gas and VFA production, indicating that this cassava residue inclusion level may be used to replace concentrate in the feed of Holstein cows. However, these results need to be verified in vivo.


2012 ◽  
Vol 200 ◽  
pp. 287-291 ◽  
Author(s):  
Quan Xiao Liu ◽  
Wen Cai Xu ◽  
Yan Na Yin

Cationic polyacrylate emulsion was used as surface sizing agent and the effects of emulsion properties on paper mechanical properties were studied. The mechanical properties of sized paper gradually increased with the increase of solid content, viscosity and positive charge density of emulsion and decreased with the increase of particle size of emulsion. Tensile strength, folding endurance and tearing strength on machine direction were increased 33.62%, 11.99%, 6.79% respectively when the paper with single emulsion layer was used oven drying methods.


BioResources ◽  
2015 ◽  
Vol 10 (4) ◽  
Author(s):  
Xuechuan Wang ◽  
Yuemei Shang ◽  
Longfang Ren ◽  
Sufeng Zhang ◽  
Peiying Guo

2011 ◽  
Vol 380 ◽  
pp. 156-159
Author(s):  
Jin Li Li ◽  
Quan Xiao Liu ◽  
Wen Cai Xu ◽  
Yu Bin Lv

Cationic polyacrylate emulsions with different properties were prepared in lad and used as surface sizing agent, the results showed that as the increase of solid content, the properties of paper increase at first but keep constant if the solid content increase further; as the increase of the pH value of the emulsion, the strength of the paper decrease, smoothness increase, gloss and whiteness decrease, saturation and printing density increase; the increase of the size of emulsion has adverse effects on the properties of the paper, so the size should not be too large; the viscosity should not be too large and not be too low, it should be kept in a moderate level.


Sign in / Sign up

Export Citation Format

Share Document