A complete and irreducible dynamic SGS heat-flux modelling based on the strain rate tensor for large-eddy simulation of thermal convection

2007 ◽  
Vol 28 (6) ◽  
pp. 1227-1243 ◽  
Author(s):  
Bing-Chen Wang ◽  
Jing Yin ◽  
Eugene Yee ◽  
Donald J. Bergstrom
2008 ◽  
Vol 604 ◽  
pp. 125-163 ◽  
Author(s):  
BING-CHEN WANG ◽  
EUGENE YEE ◽  
DONALD J. BERGSTROM ◽  
OAKI IIDA

Three new dynamic tensor thermal diffusivity subgrid-scale (SGS) heat flux (HF) models are proposed for large-eddy simulation of thermal convection. The constitutive relations for the proposed modelling approaches represent the most general explicit algebraic formulations possible for the family of SGS HF models constructed using the resolved temperature gradient and SGS stress tensor. As a result, these three new models include a number of previously proposed dynamic SGS HF models as special cases. In contrast to the classical dynamic eddy thermal diffusivity SGS HF model, which strictly requires the SGS heat flux be aligned with the negative of the resolved temperature gradient, the three new models proposed here admit more degrees of freedom, and consequently provide a more realistic geometrical and physical representation of the SGS HF vector. To validate the proposed models, numerical simulations have been performed based on two benchmark test cases of neutrally and unstably stratified horizontal channel flows.


Fluids ◽  
2021 ◽  
Vol 6 (7) ◽  
pp. 246
Author(s):  
Rozie Zangeneh

The Wall-modeled Large-eddy Simulation (WMLES) methods are commonly accompanied with an underprediction of the skin friction and a deviation of the velocity profile. The widely-used Improved Delayed Detached Eddy Simulation (IDDES) method is suggested to improve the prediction of the mean skin friction when it acts as WMLES, as claimed by the original authors. However, the model tested only on flow configurations with no heat transfer. This study takes a systematic approach to assess the performance of the IDDES model for separated flows with heat transfer. Separated flows on an isothermal wall and walls with mild and intense heat fluxes are considered. For the case of the wall with heat flux, the skin friction and Stanton number are underpredicted by the IDDES model however, the underprediction is less significant for the isothermal wall case. The simulations of the cases with intense wall heat transfer reveal an interesting dependence on the heat flux level supplied; as the heat flux increases, the IDDES model declines to predict the accurate skin friction.


Fluids ◽  
2018 ◽  
Vol 3 (3) ◽  
pp. 65 ◽  
Author(s):  
Arne Heinrich ◽  
Guido Kuenne ◽  
Sebastian Ganter ◽  
Christian Hasse ◽  
Johannes Janicka

Combustion will play a major part in fulfilling the world’s energy demand in the next 20 years. Therefore, it is necessary to understand the fundamentals of the flame–wall interaction (FWI), which takes place in internal combustion engines or gas turbines. The FWI can increase heat losses, increase pollutant formations and lowers efficiencies. In this work, a Large Eddy Simulation combined with a tabulated chemistry approach is used to investigate the transient near wall behavior of a turbulent premixed stoichiometric methane flame. This sidewall quenching configuration is based on an experimental burner with non-homogeneous turbulence and an actively cooled wall. The burner was used in a previous study for validation purposes. The transient behavior of the movement of the flame tip is analyzed by categorizing it into three different scenarios: an upstream, a downstream and a jump-like upstream movement. The distributions of the wall heat flux, the quenching distance or the detachment of the maximum heat flux and the quenching point are strongly dependent on this movement. The highest heat fluxes appear mostly at the jump-like movement because the flame behaves locally like a head-on quenching flame.


2020 ◽  
Vol 20 (20) ◽  
pp. 11893-11906
Author(s):  
Jessica Slater ◽  
Juha Tonttila ◽  
Gordon McFiggans ◽  
Paul Connolly ◽  
Sami Romakkaniemi ◽  
...  

Abstract. The aerosol–radiation–meteorology feedback loop is the process by which aerosols interact with solar radiation to influence boundary layer meteorology. Through this feedback, aerosols cause cooling of the surface, resulting in reduced buoyant turbulence, enhanced atmospheric stratification and suppressed boundary layer growth. These changes in meteorology result in the accumulation of aerosols in a shallow boundary layer, which can enhance the extent of aerosol–radiation interactions. The feedback effect is thought to be important during periods of high aerosol concentrations, for example, during urban haze. However, direct quantification and isolation of the factors and processes affecting the feedback loop have thus far been limited to observations and low-resolution modelling studies. The coupled large-eddy simulation (LES)–aerosol model, the University of California, Los Angeles large-eddy simulation – Sectional Aerosol Scheme for Large Scale Applications (UCLALES-SALSA), allows for direct interpretation on the sensitivity of boundary layer dynamics to aerosol perturbations. In this work, UCLALES-SALSA has for the first time been explicitly set up to model the urban environment, including addition of an anthropogenic heat flux and treatment of heat storage terms, to examine the sensitivity of meteorology to the newly coupled aerosol–radiation scheme. We find that (a) sensitivity of boundary layer dynamics in the model to initial meteorological conditions is extremely high, (b) simulations with high aerosol loading (220 µg m−3) compared to low aerosol loading (55 µg m−3) cause overall surface cooling and a reduction in sensible heat flux, turbulent kinetic energy and planetary boundary layer height for all 3 d examined, and (c) initial meteorological conditions impact the vertical distribution of aerosols throughout the day.


2011 ◽  
Vol 679 ◽  
pp. 156-193 ◽  
Author(s):  
EZGI S. TAŞKINOĞLU ◽  
JOSETTE BELLAN

For flows at supercritical pressure, p, the large-eddy simulation (LES) equations consist of the differential conservation equations coupled with a real-gas equation of state, and the equations utilize transport properties depending on the thermodynamic variables. Compared to previous LES models, the differential equations contain not only the subgrid-scale (SGS) fluxes but also new SGS terms, each denoted as a ‘correction’. These additional terms, typically assumed null for atmospheric pressure flows, stem from filtering the differential governing equations and represent differences, other than contributed by the convection terms, between a filtered term and the same term computed as a function of the filtered flow field. In particular, the energy equation contains a heat-flux correction (q-correction) which is the difference between the filtered divergence of the molecular heat flux and the divergence of the molecular heat flux computed as a function of the filtered flow field. We revisit here a previous a priori study where we only had partial success in modelling the q-correction term and show that success can be achieved using a different modelling approach. This a priori analysis, based on a temporal mixing-layer direct numerical simulation database, shows that the focus in modelling the q-correction should be on reconstructing the primitive variable gradients rather than their coefficients, and proposes the approximate deconvolution model (ADM) as an effective means of flow field reconstruction for LES molecular heat-flux calculation. Furthermore, an a posteriori study is conducted for temporal mixing layers initially containing oxygen (O) in the lower stream and hydrogen (H) or helium (He) in the upper stream to examine the benefit of the new model. Results show that for any LES including SGS-flux models (constant-coefficient gradient or scale-similarity models; dynamic-coefficient Smagorinsky/Yoshizawa or mixed Smagorinsky/Yoshizawa/gradient models), the inclusion of the q-correction in LES leads to the theoretical maximum reduction of the SGS molecular heat-flux difference; the remaining error in modelling this new subgrid term is thus irreducible. The impact of the q-correction model first on the molecular heat flux and then on the mean, fluctuations, second-order correlations and spatial distribution of dependent variables is also demonstrated. Discussions on the utilization of the models in general LES are presented.


Author(s):  
Dorian Lahbib ◽  
Antoine Dauptain ◽  
Florent Duchaine ◽  
Franck Nicoud

To improve gas turbine efficiency, engine manufacturers increase both the overall compressor pressure ratio and the turbine inlet temperature, resulting into a higher thermal load of the combustion chamber walls. Cooling systems such as multi-perforated plates are in this context good candidates to lower the thermal constraints on the liners. Such technological devices consist in introducing, through submillimetric holes, a cold air flow into the boundary layer of the chamber wall. Though commonly used in industrial applications, perforations with an angle of deviation, i.e. not aligned with the main flow, have not been studied in most experimental and numerical studies. The deviation angle impacts the liner temperature by modifying the flow structure around the plate. Conjugate heat transfer computations coupling Large Eddy Simulation and heat conduction are performed on streamwise and 45 angled configurations composed of 12 rows at an operating point representative of helicopter combustors to analyze the effect of the deviation. The flow organization around the plate is modified, yielding different heat flux distribution and plate temperature. The major differences are observed within the perforations where the heat flux coefficient increases up to 54% in the configuration with deviation.


Sign in / Sign up

Export Citation Format

Share Document