Investigation of microscopic mechanisms for water-ice phase change propagation control

Author(s):  
Yu-Kai Weng ◽  
Seungha Shin ◽  
Kenneth D. Kihm ◽  
Mohammad Bahzad ◽  
Douglas S. Aaron
2016 ◽  
Vol 28 (5) ◽  
pp. 055702 ◽  
Author(s):  
Jason Ivall ◽  
Gabriel Langlois-Rahme ◽  
Sylvain Coulombe ◽  
Phillip Servio

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Lei Wang ◽  
Yue Qin ◽  
Haibin Jia ◽  
Hongming Su ◽  
Shiguan Chen

In order to understand the mechanical properties and energy dissipation law of frozen sandstone under impact loading, the cretaceous water-rich red sandstone was selected as the research object to conduct impact tests at different freezing temperatures (0°C, −10°C, −20°C, and −30°C). The test results suggested the following: (1) the peak stress and peak strain of frozen sandstone are positively correlated with strain rate and freezing temperature, and the strain rate strengthening effect and the low-temperature hardening effect are obvious. (2) The strain rate sensitivity of dynamic stress increase factor (DIF) is negatively correlated with temperature. Water-ice phase change and the difference in the cold shrinkage rate of rock matrix under strong impact loading will degrade the performance of rock together, so DIF is less than 1. (3) In the negative temperature range from −10°C to −30°C, DEIF is always greater than 1. The energy dissipation rate of red sandstone specimens fluctuated between 10% and 25% under the impact loading, and the data are discrete, showing obvious strain rate independence. The failure form changes from tensile failure to shear and particle crushing failure. (4) Combined with the micromechanism analysis, the difference in dynamic mechanical properties of red sandstone at different temperatures is caused by the water-ice phase change and the different cold shrinkage rates of the frozen rock medium. When the temperature drops from 0°C to −2°C, water migrates to the free space of the pore of frozen rock and freezes into ice crystal, resulting in frozen shrinkage. At −30°C, the expansion of ice dominates and the migration of water will stop, leading to frost heave.


2020 ◽  
Vol 118 ◽  
pp. 103357 ◽  
Author(s):  
Guofeng Li ◽  
Ning Li ◽  
Yue Bai ◽  
Naifei Liu ◽  
Mingming He ◽  
...  

2020 ◽  
Vol 14 ◽  

Energy efficiency in buildings is a very important challenge that has to be faced in order to achieve the aims set by the new EU directive on Building energy efficiency encouraging nearly zero energy buildings. Unfortunately in countries with cold climate it is very hard to achieve this goal. The thickness of insulation needed to reach low energy consumption in cold climate is very big and in many cases it is not economically feasible. There is a need for new solutions for increasing building energy efficiency. In this paper a new solution for increasing building energy efficiency is proposed. It is proposed to use the latent energy of water-ice phase change to reduce heat conduction losses through building envelope. The latent energy is recovered by using low potential heat source. In this paper the validity of the proposed new solution is tested on a one dimensional scale – homogeneous infinite wall. The presented methodology is chosen to calculate systems operational efficiency throughout the whole year.


Sign in / Sign up

Export Citation Format

Share Document