Compressive cyclic response of PEM fuel cell gas diffusion media

2020 ◽  
Author(s):  
Poornesh K. Koorata ◽  
Santoshkumar D. Bhat
Keyword(s):  
Fuel Cell ◽  
Pem Fuel Cell ◽  
Gas Diffusion ◽  
Cyclic Response ◽  
Diffusion Media

Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell

2007 ◽  
Author(s):  
J. P. Owejan ◽  
T. A. Trabold ◽  
D. L. Jacobson ◽  
M. Arif ◽  
S. G. Kandlikar
Keyword(s):  
Fuel Cell ◽  
Flow Field ◽  
Pem Fuel Cell ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Cell Performance ◽  
Water Volume ◽  
Fuel Cell Performance ◽  
Diffusion Media ◽  
And Diffusion

Water is the main product of the electrochemical reaction in a proton exchange membrane (PEM) fuel cell. Where the water is produced over the active area of the cell, and how it accumulates within the flow fields and gas diffusion layers, strongly affects the performance of the device and influences operational considerations such as freeze and durability. In this work, the neutron radiography method was used to obtain two-dimensional distributions of liquid water in operating 50 cm2 fuel cells. Variations were made of flow field channel and diffusion media properties, to assess the effects on the overall volume and spatial distribution of accumulated water. Flow field channels with hydrophobic coating retain more water, but the distribution of a greater number of smaller slugs in the channel area improves fuel cell performance at high current density. Channels with triangular geometry retain less water than rectangular channels of the same cross-sectional area, and the water is mostly trapped in the two corners adjacent to the diffusion media. Also, it was found that cells constructed using diffusion media with lower in-plane gas permeability tended to retain less water. In some cases, large differences in fuel cell performance were observed with very small changes in accumulated water volume, suggesting that flooding within the electrode layer or at the electrode-diffusion media interface is the primary cause of the significant mass transport voltage loss.

GDM Intrusion Into Reactant Gas Channels and the Effect on Fuel Cell Performance

2006 ◽  
Author(s):  
Pinkhas Rapaport ◽  
Yeh-Hung Lai ◽  
Chunxin Ji
Keyword(s):  
Fuel Cell ◽  
Gas Flow ◽  
Flow Distribution ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Gas Diffusion ◽  
Cell Performance ◽  
Fuel Cell Performance ◽  
Diffusion Media ◽  
Reactant Flow

This paper reports on the study of gas diffusion media (GDM) intrusion into reactant gas channels and its effect on the performance of the proton exchange membrane (PEM) fuel cell. The PEM fuel cell under consideration consists of a membrane electrode assembly (MEA) sandwiched between two layers of gas diffusion media commonly made of carbon paper or cloth. The GDM/MEA/GDM assembly is then compressed between two adjacent bi-polar plates. In this configuration, the compression pressure is transmitted under the lands of the reactant gas flow-field onto GDMs on which the portion over the channels remain unsupported. Because of the relatively low bending and compressive stiffness, it is found that GDMs can easily intrude into the reactant gas channels. The direct consequence of GDM intrusion is the pressure drop increase in the reactant gases in the intruded channels. This is further compounded by cell-to-cell or channel-to-channel variation in GDM thickness and mechanical properties, which results in non-uniform reactant gas flow distribution and ultimately negatively impacts the fuel cell performance. In this study, we have developed a GDM intrusion model based on the finite element method (FEM. We have also devised an experimental setup to measure the GDM intrusion, in which we found good agreement between the model prediction and experimental measurement. Combining the FEM based intrusion model and a flow redistribution model we have investigated the effect of GDM channel intrusion on the reactant flow distribution and the impact on the fuel cell performance. It is found that a 20% reduction of reactant flow can be induced with a 5% additional blockage in channels by GDM intrusion. Based on the findings from the current study, we attribute the significant performance variation in a 30-cell fuel cell stack to the variation in reactant flow induced by the variation in GDM intrusion. The results from the analytical study and fuel cell testing both suggested that the product variations in GDM would need to be significantly reduced and the stiffness of the GDM would need to be increased if the PEM fuel cells of high power density were to be used reliably at a relatively low stoichiometry.

Predicting Liquid Water Saturation Through Differently Structured Cathode Gas Diffusion Media of a Proton Exchange Membrane Fuel Cell

2012 ◽  
Vol 9 (2) ◽  
Author(s):  
N. Akhtar ◽  
P. J. A. M. Kerkhof
Keyword(s):  
Fuel Cell ◽  
Liquid Water ◽  
Proton Exchange Membrane ◽  
Water Saturation ◽  
Catalyst Layer ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Diffusion Media ◽  
Exchange Membrane

The role of gas diffusion media with differently structured properties have been examined with emphasis on the liquid water saturation within the cathode of a proton exchange membrane fuel cell (PEMFC). The cathode electrode consists of a gas diffusion layer (GDL), a micro-porous layer and a catalyst layer (CL). The liquid water saturation profiles have been calculated for varying structural and physical properties, i.e., porosity, permeability, thickness and contact angle for each of these layers. It has been observed that each layer has its own role in determining the liquid water saturation within the CL. Among all the layers, the GDL is the most influential layer that governs the transport phenomena within the PEMFC cathode. Besides, the thickness of the CL also affects the liquid water saturation and it should be carefully controlled.

Pore Structure Modeling of Flow in Gas Diffusion Layers of Proton Exchange Membrane Fuel Cells

2010 ◽  
Author(s):  
Zhongying Shi ◽  
Xia Wang
Keyword(s):  
Fuel Cell ◽  
Pore Structure ◽  
Proton Exchange Membrane ◽  
Cell Model ◽  
Transport Phenomena ◽  
Pem Fuel Cell ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Structure Model ◽  
Exchange Membrane

The gas diffusion layer (GDL) in a proton exchange membrane (PEM) fuel cell has a porous structure with anisotropic and non-homogenous properties. The objective of this research is to develop a PEM fuel cell model where transport phenomena in the GDL are simulated based on GDL’s pore structure. The GDL pore structure was obtained by using a scanning electron microscope (SEM). GDL’s cross-section view instead of surface view was scanned under the SEM. The SEM image was then processed using an image processing tool to obtain a two dimensional computational domain. This pore structure model was then coupled with an electrochemical model to predict the overall fuel cell performance. The transport phenomena in the GDL were simulated by solving the Navier-Stokes equation directly in the GDL pore structure. By comparing with the testing data, the fuel cell model predicted a reasonable fuel cell polarization curve. The pore structure model was further used to calculate the GDL permeability. The numerically predicted permeability was close to the value published in the literature. A future application of the current pore structure model is to predict GDL thermal and electric related properties.

The Effect of Catalyst Coated Diffusion Media on PEM Fuel Cell Performance

2009 ◽  
Author(s):  
Derek W. Fultz ◽  
Po-Ya Abel Chuang
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Thermal Contact ◽  
Electrical Contact ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Hot Press ◽  
Fuel Cell Performance ◽  
Diffusion Media ◽  
A Cell

Two fuel cell architectures, differing only by the surfaces onto which the electrodes were applied, have been analyzed to determine the root causes of dissimilarities in performance. The basic proton exchange membrane fuel cell (PEMFC) is comprised of the proton transporting membrane, platinum-containing anode and cathode electrodes, porous carbon fiber gas diffusion media (GDM), and flow fields which deliver the reactant hydrogen and air flows. As no optimal cell design currently exists, there is a degree of latitude regarding component assembly and structure. Catalyst coated diffusion media (CCDM) refers to a cell architecture option where the electrode layers are coated on the GDM layers and then hot-pressed to the membrane. Catalyst coated membrane (CCM) refers to an architecture where the electrodes are transferred directly onto the membrane. A cell with CCDM architecture has tightly bonded interfaces throughout the assembly which can result in lower thermal and electrical contact resistances. Considering the fuel cell as a 1-D thermal system, the through-plane thermal resistance was observed to decrease by 5–10% when comparing CCDM to CCM architectures. This suggests the thermal contact resistance at the electrode interfaces was significantly reduced in the hot-press process. In addition, the electrical contact resistances between the electrode and GDM were observed to be significantly reduced with a CCDM architecture. This study shows that these effects, which have a potential to increase performance, can be attributed to the hot-press lamination process and use of CCDM architecture.

scholarly journals A Kernel for Calculating PEM Fuel Cell Distribution of Relaxation Times

2021 ◽  
Vol 9 ◽  
Author(s):  
Andrei Kulikovsky
Keyword(s):  
Fuel Cell ◽  
Oxygen Transport ◽  
Relaxation Times ◽  
Catalyst Layer ◽  
Pem Fuel Cell ◽  
Negative Real Part ◽  
Gas Diffusion ◽  
Transport Processes ◽  
Transport Layer ◽  
Cathode Side

Impedance of all oxygen transport processes in PEM fuel cell has negative real part in some frequency domain. A kernel for calculation of distribution of relaxation times (DRT) of a PEM fuel cell is suggested. The kernel is designed for capturing impedance with negative real part and it stems from the equation for impedance of oxygen transport through the gas-diffusion transport layer (doi:10.1149/2.0911509jes). Using recent analytical solution for the cell impedance, it is shown that DRT calculated with the novel K2 kernel correctly captures the GDL transport peak, whereas the classic DRT based on the RC-circuit (Debye) kernel misses this peak. Using K2 kernel, analysis of DRT spectra of a real PEMFC is performed. The leftmost on the frequency scale DRT peak represents oxygen transport in the channel, and the rightmost peak is due to proton transport in the cathode catalyst layer. The second, third, and fourth peaks exhibit oxygen transport in the GDL, faradaic reactions on the cathode side, and oxygen transport in the catalyst layer, respectively.

Pore Structure Modeling of Flow in Gas Diffusion Layers of Proton Exchange Membrane Fuel Cells

2012 ◽  
Vol 9 (2) ◽  
Author(s):  
Z. Shi ◽  
X. Wang
Keyword(s):  
Fuel Cell ◽  
Pore Structure ◽  
Proton Exchange Membrane ◽  
Cell Model ◽  
Transport Phenomena ◽  
Pem Fuel Cell ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Structure Model ◽  
Exchange Membrane

The gas diffusion layer (GDL) in a proton exchange membrane (PEM) fuel cell has a porous structure with anisotropic and non-homogenous properties. The objective of this research is to develop a PEM fuel cell model where transport phenomena in the GDL are simulated based on GDL’s pore structure. The GDL pore structure was obtained by using a scanning electron microscope (SEM). GDL’s cross-section view instead of surface view was scanned under the SEM. The SEM image was then processed using an image processing tool to obtain a two-dimensional computational domain. This pore structure model was then coupled with an electrochemical model to predict the overall fuel cell performance. The transport phenomena in the GDL were simulated by solving the Navier-Stokes equation directly in the GDL pore structure. By comparing with the testing data, the fuel cell model predicted a reasonable fuel cell polarization curve. The pore structure model was further used to calculate the GDL permeability. The numerically predicted permeability was close to the value published in the literature. A future application of the current pore structure model is to predict GDL thermal and electric related properties.

Sign in / Sign up

Export Citation Format

Share Document