On the imperfection sensitivity and design of tori-spherical shells under external pressure

2021 ◽  
Vol 191 ◽  
pp. 104321
Author(s):  
H.N.R. Wagner ◽  
G. Niewöhner ◽  
A. Pototzky ◽  
C. Hühne
1981 ◽  
Vol 103 (3) ◽  
pp. 261-266 ◽  
Author(s):  
J. Morton ◽  
P. R. Murray ◽  
C. Ruiz

Experimental results are interpreted in the light of numerical analaysis, imperfection sensitivity and Design Codes. Two cases are discussed: spherical shells under uniform external pressure and partly filled spherical shells, supported on a continuous equatorial ring. The imperfection sensitivity associated with the first loading case leads to the selection of safety factors that depend on the actual shell stiffness. The second case, in which the load results in a biaxial tension-compression state of stress, is treated approximately in terms of a plate under biaxial load.


Author(s):  
Jan Sieber ◽  
John W. Hutchinson ◽  
J. Michael T. Thompson

Dynamic buckling is addressed for complete elastic spherical shells subject to a rapidly applied step in external pressure. Insights from the perspective of nonlinear dynamics reveal essential mathematical features of the buckling phenomena. To capture the strong buckling imperfection-sensitivity, initial geometric imperfections in the form of an axisymmetric dimple at each pole are introduced. Dynamic buckling under the step pressure is related to the quasi-static buckling pressure. Both loadings produce catastrophic collapse of the shell for conditions in which the pressure is prescribed. Damping plays an important role in dynamic buckling because of the time-dependent nonlinear interaction among modes, particularly the interaction between the spherically symmetric ‘breathing’ mode and the buckling mode. In general, there is not a unique step pressure threshold separating responses associated with buckling from those that do not buckle. Instead, there exists a cascade of buckling thresholds, dependent on the damping and level of imperfection, separating pressures for which buckling occurs from those for which it does not occur. For shells with small and moderately small imperfections, the dynamic step buckling pressure can be substantially below the quasi-static buckling pressure.


Author(s):  
John W. Hutchinson

A study is presented of the post-buckling behaviour and imperfection sensitivity of complete spherical shells subject to uniform external pressure. The study builds on and extends the major contribution to spherical shell buckling by Koiter in the 1960s. Numerical results are presented for the axisymmetric large deflection behaviour of perfect spheres followed by an extensive analysis of the role axisymmetric imperfections play in reducing the buckling pressure. Several types of middle surface imperfections are considered including dimple-shaped undulations and sinusoidal-shaped equatorial undulations. Buckling occurs either as the attainment of a maximum pressure in the axisymmetric state or as a non-axisymmetric bifurcation from the axisymmetric state. Several new findings emerge: the abrupt mode localization that occurs immediately after the onset of buckling, the existence of an apparent lower limit to the buckling pressure for realistically large imperfections, and comparable reductions of the buckling pressure for dimple and sinusoidal equatorial imperfections.


1967 ◽  
Vol 34 (1) ◽  
pp. 49-55 ◽  
Author(s):  
J. W. Hutchinson

The initial postbuckling behavior of a shallow section of a spherical shell subject to external pressure is studied within the context of Koiter’s general theory of postbuckling behavior. Imperfections in the shell geometry are shown to have the same severe effect on the buckling strengths of spherical shells as has been demonstrated for axially compressed cylindrical shells. Large reductions in the buckling pressure result from small deviations, relative to the shell thickness, of the shell middle surface from the perfect configuration.


ce/papers ◽  
2021 ◽  
Vol 4 (2-4) ◽  
pp. 1789-1796
Author(s):  
Esmaeil Azizi ◽  
Natalie Stranghöner

2009 ◽  
Vol 31 (1) ◽  
pp. 17-30 ◽  
Author(s):  
Dao Huy Bich

In the present paper the non-linear buckling analysis of functionally graded spherical shells subjected to external pressure is investigated. The material properties are graded in the thickness direction according to the power-law distribution in terms of volume fractions of the constituents of the material. In the formulation of governing equations geometric non-linearity in all strain-displacement relations of the shell is considered. Using Bubnov-Galerkin's method to solve the problem an approximated analytical expression of non-linear buckling loads of functionally graded spherical shells is obtained, that allows easily to investigate stability behaviors of the shell.


1989 ◽  
Vol 33 (04) ◽  
pp. 318-325
Author(s):  
Dario Boote ◽  
Donatella Mascia

Submersible structures consist merely of simple and double curvature thin-walled shells. For this kind of structure, collapse occurs due to the combined nonlinear action of buckling and plasticity of material. Load-carrying capacity may then be assessed mainly by two approaches: experimental investigations and step-by-step numerical procedures. In nonlinear analyses, the results obtained are influenced by the magnitude of the load increment adopted. Solution procedures are then required in order to choose adequate parameters for material failure description as well as elastic nonlinearity. The aim of this paper is to carry out a suitable numerical procedure whose reliability does not depend on the finite-element code adopted.


1987 ◽  
Vol 2 (1) ◽  
Author(s):  
M. Drmota ◽  
R. Scheidl ◽  
H. Troger ◽  
E. Weinm�ller

Sign in / Sign up

Export Citation Format

Share Document