Slip-flow and heat transfer in rectangular microchannels with constant wall temperature

2006 ◽  
Vol 45 (9) ◽  
pp. 870-881 ◽  
Author(s):  
M. Renksizbulut ◽  
H. Niazmand ◽  
G. Tercan
Author(s):  
H. D. Madhawa Hettiarachchi ◽  
Mihajlo Golubovic ◽  
William M. Worek

Slip-flow and heat transfer in rectangular microchannels are studied numerically for constant wall temperature (T) and constant wall heat flux (H2) boundary conditions under thermally developing flow. Navier-Stokes and energy equations with velocity slip and temperature jump at the boundary are solved using finite volume method in a three dimensional cartesian coordinate system. A modified convection-diffusion coefficient at the wall-fluid interface is defined to incorporate the temperature-jump boundary condition. Validity of the numerical simulation procedure is stabilized. The effect of rarefaction on heat transfer in the entrance region is analyzed in detail. The velocity slip has an increasing effect on the Nusselt (Nu) number whereas temperature jump has a decreasing effect, and the combined effect could result increase or decrease in the Nu number. For the range of parameters considered, there could be high as 15% increase or low as 50% decrease in fully developed Nu is plausible for T thermal boundary condition while it could be high as 20% or low as 35% for H2 thermal boundary condition.


Author(s):  
Azad Qazi Zade ◽  
Metin Renksizbulut ◽  
Jacob Friedman

The effects of variable physical properties on the flow and heat transfer characteristics of simultaneously developing slip-flow in rectangular microchannels with constant wall heat flux are numerically investigated. A co-located finite-volume method is used in order to solve the mass, momentum and energy equations in their most general form. Thermophysical properties of the flowing gas are functions of temperature, while density and Knudsen number are allowed to change with both pressure and temperature. Different Knudsen numbers are considered in order to study the effects of slip-flow. Simulations indicate that the constant physical property assumption can result in under/over-prediction of the local friction and heat transfer coefficients depending on the problem configuration. Density and thermophysical property variations have significant effects on predicting flow and heat transfer characteristics since the gas temperature constantly changes as a result of the applied wall heat flux. Heat transfer coefficient is affected both due to the change in the velocity field and change in thermophysical properties. Also temperature dependence of the local Knudsen number can significantly alter the friction coefficients due to its strong dependence on slip conditions. The degree of discrepancy varies for different cases depending on the Knudsen number, and the applied heat flux strength and direction (cooling versus heating).


2013 ◽  
Vol 24 (08) ◽  
pp. 1350054 ◽  
Author(s):  
ALI AMIRI-JAGHARGH ◽  
HAMID NIAZMAND ◽  
METIN RENKSIZBULUT

The effects of thermal creep on the development of gaseous fluid flow and heat transfer in rectangular microchannels with constant wall temperature are investigated in the slip-flow regime. Thermal creep arises from tangential temperature gradients, which may be significant in the entrance region of channels, and affects the velocity and temperature fields particularly in low Reynolds number flows. In the present work, the Navier–Stokes and energy equations coupled with velocity-slip and temperature-jump conditions applied at the channel walls are solved numerically using a control-volume technique. Despite the constant wall temperature, tangential temperature gradients form in the gas layer adjacent to the wall due to the temperature-jump condition. The effects of slip/jump and thermal creep on the flow patterns and parameters are studied in detail for a wide range of channel aspect ratios and, Knudsen and Reynolds numbers. Furthermore, the effects of variable properties on velocity-slip and, friction and heat transfer coefficients are also examined.


2001 ◽  
Vol 124 (2) ◽  
pp. 356-364 ◽  
Author(s):  
Nicolas G. Hadjiconstantinou ◽  
Olga Simek

We investigate the constant-wall-temperature convective heat-transfer characteristics of a model gaseous flow in two-dimensional micro and nano-channels under hydrodynamically and thermally fully developed conditions. Our investigation covers both the slip-flow regime 0⩽Kn⩽0.1, and most of the transition regime 0.1<Kn⩽10, where Kn, the Knudsen number, is defined as the ratio between the molecular mean free path and the channel height. We use slip-flow theory in the presence of axial heat conduction to calculate the Nusselt number in the range 0⩽Kn⩽0.2, and a stochastic molecular simulation technique known as the direct simulation Monte Carlo (DSMC) to calculate the Nusselt number in the range 0.02<Kn<2. Inclusion of the effects of axial heat conduction in the continuum model is necessary since small-scale internal flows are typically characterized by finite Peclet numbers. Our results show that the slip-flow prediction is in good agreement with the DSMC results for Kn⩽0.1, but also remains a good approximation beyond its expected range of applicability. We also show that the Nusselt number decreases monotonically with increasing Knudsen number in the fully accommodating case, both in the slip-flow and transition regimes. In the slip-flow regime, axial heat conduction is found to increase the Nusselt number; this effect is largest at Kn=0 and is of the order of 10 percent. Qualitatively similar results are obtained for slip-flow heat transfer in circular tubes.


2013 ◽  
Vol 135 (10) ◽  
Author(s):  
H. R. Mozayyeni ◽  
Asghar B. Rahimi

The steady-state three-dimensional flow and heat transfer of a viscous, compressible fluid in the vicinity of stagnation point region on a flat plate with constant wall temperature is investigated by similarity solution approach, taking into account the variation of density of the fluid with respect to temperature. The free stream, along z-direction, impinges on the flat plate to produce a flow with different velocity components. An exact solution of the problem is obtained for the three dimensional case by the reduction of the Navier–Stokes and energy equations using appropriate similarity transformations introduced for the first time. The nonlinear ordinary differential equations are solved numerically using a finite difference scheme. Computations have been conducted for different values of the parameters characterizing the problem. The obtained results show that increasing the value of compressibility factor and wall temperature both cause the value of the velocity components and temperature gradients and pressure gradients in the vicinity of the plate to increase.


Sign in / Sign up

Export Citation Format

Share Document