Aging precipitation kinetics of Mg-Sc alloy with bcc+hcp two-phase

2018 ◽  
Vol 747 ◽  
pp. 854-860 ◽  
Author(s):  
Yukiko Ogawa ◽  
Yuji Sutou ◽  
Daisuke Ando ◽  
Junichi Koike
1985 ◽  
Vol 50 (8) ◽  
pp. 1642-1647 ◽  
Author(s):  
Štefan Baláž ◽  
Anton Kuchár ◽  
Ernest Šturdík ◽  
Michal Rosenberg ◽  
Ladislav Štibrányi ◽  
...  

The distribution kinetics of 35 2-furylethylene derivatives in two-phase system 1-octanol-water was investigated. The transport rate parameters in direction water-1-octanol (l1) and backwards (l2) are partition coefficient P = l1/l2 dependent according to equations l1 = logP - log(βP + 1) + const., l2 = -log(βP + 1) + const., const. = -5.600, β = 0.261. Importance of this finding for assesment of distribution of compounds under investigation in biosystems and also the suitability of the presented method for determination of partition coefficients are discussed.


Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1142
Author(s):  
S. V. Sajadifar ◽  
P. Krooß ◽  
H. Fröck ◽  
B. Milkereit ◽  
O. Kessler ◽  
...  

In the present study, microstructural and mechanical properties of EN AW 7075 following stress-aging were assessed. For this purpose, properties of stress-aged samples were compared with values obtained for conventionally aged counterparts. It is revealed that the strength and hardness of EN AW 7075 can be increased by the presence of external stresses during aging. Precipitation kinetics were found to be accelerated. The effects of conventional and stress-aging on the microstructure were analyzed using synergetic techniques: the differently aged samples were probed by differential scanning calorimetry (DSC) in order to characterize the precipitation processes. DSC was found to be an excellent screening tool for the analysis of precipitation processes during aging of this alloy with and without the presence of external stresses. Furthermore, using electron microscopy it was revealed that an improvement in mechanical properties can be correlated to changes in the morphologies and sizes of precipitates formed.


2013 ◽  
Vol 212 ◽  
pp. 127-132 ◽  
Author(s):  
Henryk Kania

In the paper the author presents the results of tests defining the characteristics of behaviour of Sandelin steel in the high-temperature galvanizing process. The growth kinetics of hot-dip zinc coatings on the substrate of 0.05% Si steel in the temperature range of 540-580°C has been established. The structure of the coatings and their phase composition have been developed and the chemical composition of structural components of the coating has be defined. It has been determined that the coating is composed of a compact layer δ1 and an area of a two-phase mixture of δ1 and Zn. The conducted tests confirmed the presence of phase Γ1 , which does not form a continuous layer but it forms individual precipitates which are irregular in shape. The growth kinetics of the coating indicates that an increase in temperature causes a decrease in the coating thickness, which might prove that dissolving processes prevailed over the processes of diffuse coating growth.


Author(s):  
Filipe Caldatto Dalan ◽  
Gisele Ferreira de Lima Andreani ◽  
Dilermando Nagle Travessa ◽  
Svetlana Faizova ◽  
Ilshat Albertovich Faizov ◽  
...  

2016 ◽  
Vol 117 ◽  
pp. 43-50 ◽  
Author(s):  
J. Taendl ◽  
A. Orthacker ◽  
H. Amenitsch ◽  
G. Kothleitner ◽  
C. Poletti

Sign in / Sign up

Export Citation Format

Share Document