Towards Biofuel Generation III+: A Sustainable Industrial Symbiosis Design of Co-producing Algal and Cellulosic Biofuels

2021 ◽  
pp. 127144
Author(s):  
Lin Li ◽  
Yuntian Ge ◽  
Minkun Xiao
2014 ◽  
Author(s):  
Yunxia Zhu ◽  
Milind Dawande ◽  
Srinagesh Gavirneni ◽  
Vaidy Jayraman
Keyword(s):  

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shannon M. Hoffman ◽  
Maria Alvarez ◽  
Gilad Alfassi ◽  
Dmitry M. Rein ◽  
Sergio Garcia-Echauri ◽  
...  

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae, O. polymorpha, and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha, as well as Saccharomyces cerevisiae, and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1172
Author(s):  
Hafiz Haq ◽  
Petri Välisuo ◽  
Seppo Niemi

Industrial symbiosis networks conventionally provide economic and environmental benefits to participating industries. However, most studies have failed to quantify waste management solutions and identify network connections in addition to methodological variation of assessments. This study provides a comprehensive model to conduct sustainable study of industrial symbiosis, which includes identification of network connections, life cycle assessment of materials, economic assessment, and environmental performance using standard guidelines from the literature. Additionally, a case study of industrial symbiosis network from Sodankylä region of Finland is implemented. Results projected an estimated life cycle cost of €115.20 million. The symbiotic environment would save €6.42 million in waste management cost to the business participants in addition to the projected environmental impact of 0.95 million tonne of CO2, 339.80 tonne of CH4, and 18.20 tonne of N2O. The potential of further cost saving with presented optimal assessment in the current architecture is forecast at €0.63 million every year.


2021 ◽  
Vol 289 ◽  
pp. 125593
Author(s):  
Linda Kosmol ◽  
Martin Maiwald ◽  
Christoph Pieper ◽  
Joscha Plötz ◽  
Thorsten Schmidt

Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 69
Author(s):  
Aldric S. Tumilar ◽  
Dia Milani ◽  
Zachary Cohn ◽  
Nick Florin ◽  
Ali Abbas

This article describes a unique industrial symbiosis employing an algae cultivation unit (ACU) at the core of a novel eco-industrial park (EIP) integrating fossil-fuel fired power generation, carbon capture, biofuel production, aquaculture, and wastewater treatment. A new modelling framework capable of designing and evaluating materials and energy exchanges within an industrial eco-system is introduced. In this scalable model, an algorithm was developed to balance the material and energy exchanges and determine the optimal inputs and outputs based on the industrial symbiosis objectives and participating industries. Optimizing the functionality of the ACU not only achieved a substantial emission reduction, but also boosted aquaculture, biofuel, and other chemical productions. In a power-boosting scenario (PBS), by matching a 660 MW fossil fuel-fired power plant with an equivalent solar field in the presence of ACU, fish-producing aquaculture and biofuel industries, the net CO2 emissions were cut by 60% with the added benefit of producing 39 m3 biodiesel, 6.7 m3 bioethanol, 0.14 m3 methanol, and 19.55 tons of fish products annually. Significantly, this article shows the potential of this new flexible modelling framework for integrated materials and energy flow analysis. This integration is an important pathway for evaluating energy technology transitions towards future low-emission production systems, as required for a circular economy.


Water ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 824
Author(s):  
Karolina Södergren ◽  
Jenny Palm

The industrial symbiosis (IS) landscape is evolving rapidly. While previous studies have argued for the importance of municipalities participating in the governing of IS, research on the implications of different forms of municipal organization is still lacking. This paper aims to investigate how municipal administration and municipally-owned corporations, as two forms of organization, impact the governing of IS in the water and sewage sector. This is explored in relation to the Swedish municipality Simrishamn, which recently underwent changes in the form of organization. Results show that municipal administration contributes to a more inclusive process where many actors can influence and bring ideas and perspectives on how to develop an IS. The risk, however, is that other issues within the municipality are seen as more pressing and, therefore, get prioritized before IS. In corporate form, the development of IS becomes more business-like as the focus is kept on core business. Technology development is strengthened as skills and competencies are promoted through the expertise of the employees. Drawbacks include processes becoming less transparent and political goals, such as citizen welfare not receiving the same level of priority as within municipal administration. There is also a risk that fewer perspectives are included in the process of developing IS, which may inhibit innovation, even if the results also indicate that an increased business focus of the corporate form strengthens the innovation capacity.


Sign in / Sign up

Export Citation Format

Share Document