Energy and environmental impacts of a 37.57 MW dc ground-mounted large-scale photovoltaic system in Malaysia: A life-cycle approach

2021 ◽  
pp. 130326
Author(s):  
Atiqah Hamizah Mohd Nordin ◽  
Shahril Irwan Sulaiman ◽  
Sulaiman Shaari ◽  
Rijalul Fahmi Mustapa
2021 ◽  
Author(s):  
András Polgár ◽  
Karolina Horváth ◽  
Imre Mészáros ◽  
Adrienn Horváth ◽  
András Bidló ◽  
...  

<p>Crop production is applied on about half of Hungary’s land area, which amounts to approximately 4.5 million hectares. The agricultural activity has significant environmental impacts.</p><p>Our work aims the time series investigation of the impacts of large-scale agricultural cultivation<strong> </strong>on environment and primarily on climate change in<strong> </strong>the test area by applying environmental life cycle assessment (LCA) method.</p><p>The investigated area of Lajta Project can be found in the triangle formed by the settlements Mosonszolnok, Jánossomorja and Várbalog, in the north-western corner of Hungary, in Győr-Moson-Sopron county. The area has intense agri-environment characteristics, almost entirely lacking of grasslands and meadows.</p><p>We were looking for the answer to the question “To what extent does agricultural activity on this area impact the environment and how can it contribute to climate change during a given period?” The selection of the plants included in the analysis was justified by their significant growing area. We analysed the cultivation data of 5 crops: canola, winter barley, winter wheat, green maize and maize. Material flows of arable crop production technologies were defined in time series by the agricultural parcel register data. These covered the size of the area actually cultivated, the operational processes, records on seeds, fertilizer and pesticide use and harvest data by parcels. The examined environmental inventory database contained also the fuel consumption and lubricating oil usage of machine operations, and the water usage of chemical utilization.</p><p>In the life cycle modelling of cultivation, we examined 13 years of maize, 20 years of green maize, 20 years of winter barley, 18 years of winter wheat and 15 years of canola data calculated on 1 ha unit using GaBi life cycle analysis software.</p><p>In addition, we also calculated by an average cultivation model for all cultivated plants with reference data to 1 ha and 1 year period.</p><p>We applied methods and models in our life cycle impact assessment. According to the values of the impact categories, we set up the following increasing environmental ranking of plant cultivation: (1) canola has minimum environmental impacts followed by (2) green maize and (3) maize with slightly higher values, (4) winter barley has 6 times higher values preceded by (5) winter wheat with a slight difference. The previous environmental ranking of the specific cultivated plants’ contribution was also confirmed as regards the overall environmental impact: canola (1.0%) – green maize (4.9%) – maize (7.1%) – winter barley (43.1%) – winter wheat (44.0%).</p><p>Environmental impact category indicator results cumulated to total cultivation periods and total crop growing areas (quantitative approach) display the specific environmental footprints by crops. Increasing environmental ranking of environmental impacts resulted from cultivating the sample area is the following: (1) canola – (2) maize – (3) green maize – (4) winter barley – (5) winter wheat. The slight difference resulted in the rankings in quantitative approach according to the rankings of territorial approach on the investigated area is due to the diversity of cultivation time factor and the crop-growing parameter of the specific crops.</p><p>Acknowledgement: Our research was supported by the „Lajta-Project”.</p>


2019 ◽  
Vol 281 ◽  
pp. 03005 ◽  
Author(s):  
Nicolas Youssef ◽  
Andry Zaid Rabenantoandro ◽  
Zakaria Dakhli ◽  
Fadi Hage Chehade ◽  
Zoubeir Lafhaj

This article presents the environmental assessment of geopolymer bricks produced from clay and waste bricks. The life cycle approach is the method used in this research to qualify, identify and compare the environmental impacts of geopolymer bricks and fired bricks. The results reveal that the manufacturing process of geopolymer bricks implies for the same compressive strength of fired bricks, a reduction of CO2 emissions by up to 55% for clay-based geopolymer bricks. This research checks the environmental interests of the application of geopolymerization technology in the production of bricks.


2019 ◽  
Vol 11 (3) ◽  
pp. 856 ◽  
Author(s):  
Milena Stevanovic ◽  
Karen Allacker ◽  
Stéphane Vermeulen

With the aim of moving towards a more sustainable society, hospital buildings are challenged to decrease their environmental impact while continuing to offer affordable and qualitative medical care. The aim of this paper was to gain insight into the main drivers of the environmental impacts and costs of healthcare facilities, and to identify methodological obstacles for a quantitative assessment. More specifically, the objective was to assess the environmental and financial impacts of the general hospital Sint Maarten in Mechelen (Belgium) by using a life cycle approach. The hospital building was analyzed based on a combination of a simplified life cycle assessment and life cycle costing. The “MMG+_KULeuven” assessment tool was used for the calculation of environmental impacts and financial costs. The study revealed that the environmental impact was mainly caused by electricity use for appliances and lighting, cleaning processes, material production, and spatial heating, while building construction and electricity use caused the highest financial costs. The most relevant impact categories identified were global warming, eutrophication, acidification, human toxicity (cancer and non-cancer effects), and particulate matter. Various methodological challenges were identified, such as the adaptation of existing methods to ensure applicability to hospital buildings and the extraction of data from a Revit model.


2021 ◽  
Vol 13 (21) ◽  
pp. 11978
Author(s):  
Hadeer Abdalla ◽  
Kazi Parvez Fattah ◽  
Mohamed Abdallah ◽  
Adil K. Tamimi

3D printing, is a newly adopted technique in the construction sector with the aim to improve the economics and alleviate environmental impacts. This study assesses the eco-efficiency of 3D printing compared to conventional construction methods in large-scale structural fabrication. A single-storey 3D-printed house was selected in the United Arab Emirates to conduct the comparative assessment against traditional concrete construction. The life cycle assessment (LCA) framework is utilized to quantify the environmental loads of raw materials extraction and manufacturing, as well as energy consumption during construction and operation phases. The economics of the selected structural systems were investigated through life cycle costing analysis (LCCA), that included mainly the construction costs and energy savings. An eco-efficiency analysis was employed to aggregate the results of the LCA and LCCA into a single framework to aid in decision making by selecting the optimum and most eco-efficient alternative. The findings revealed that houses built using additive manufacturing and 3D printed materials were more environmentally favourable. The conventional construction method had higher impacts when compared to the 3D printing method with global warming potential of 1154.20 and 608.55 kg CO2 eq, non-carcinogenic toxicity 675.10 and 11.9 kg 1,4-DCB, and water consumption 233.35 and 183.95 m3, respectively. The 3D printed house was also found to be an economically viable option, with 78% reduction in the overall capital costs when compared to conventional construction methods. The combined environmental and economic results revealed that the overall process of the 3D-printed house had higher eco efficiency compared to concrete-based construction. The main results of the sensitivity analysis revealed that up to 90% of the environmental impacts in 3D printing mortars can be mitigated with decreasing cement ratios.


Architecture ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 69-82
Author(s):  
Manuela Crespi

The market of Adaptive Building Skins has been growing at a slow but incremental speed, as these technologies ensure better indoor climatic comfort and more efficient energy management than traditional solutions. Nonetheless, if we acknowledge the building as a system of physical qualities oriented to overall environmental performance, the resource optimization has to be extended to considering a wider range of environmental impacts along the entire building life cycle. For this purpose, the Life Cycle Assessment (LCA) method is recognized by stakeholders as the most world-renowned standardized tool for weighting environmental impacts. The aim of this study is to scrutinize the state of the art of LCA among stakeholders enrolled in the design and manufacturing of building and adaptive facades in the Italian market. Data have been collected throughout interviews and an online survey focusing on investigating the knowledge and experience level of participants. Results not only draw the attention to develop new market models by implementing sustainable building protocols concerning adaptive technologies, but also provided a positive assessment on the usability degree of a parametric design mapping based on a systemic and life-cycle-oriented approach to achieve environmental scopes and introduce competitive factors and boost innovation in the Italian building industry.


Batteries ◽  
2019 ◽  
Vol 5 (2) ◽  
pp. 48 ◽  
Author(s):  
Qiang Dai ◽  
Jarod C. Kelly ◽  
Linda Gaines ◽  
Michael Wang

In light of the increasing penetration of electric vehicles (EVs) in the global vehicle market, understanding the environmental impacts of lithium-ion batteries (LIBs) that characterize the EVs is key to sustainable EV deployment. This study analyzes the cradle-to-gate total energy use, greenhouse gas emissions, SOx, NOx, PM10 emissions, and water consumption associated with current industrial production of lithium nickel manganese cobalt oxide (NMC) batteries, with the battery life cycle analysis (LCA) module in the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model, which was recently updated with primary data collected from large-scale commercial battery material producers and automotive LIB manufacturers. The results show that active cathode material, aluminum, and energy use for cell production are the major contributors to the energy and environmental impacts of NMC batteries. However, this study also notes that the impacts could change significantly, depending on where in the world the battery is produced, and where the materials are sourced. In an effort to harmonize existing LCAs of automotive LIBs and guide future research, this study also lays out differences in life cycle inventories (LCIs) for key battery materials among existing LIB LCA studies, and identifies knowledge gaps.


Author(s):  
Antonio Cavallin Toscani ◽  
Laura Macchion ◽  
Anna Stoppato ◽  
Andrea Vinelli

Sign in / Sign up

Export Citation Format

Share Document