A thermal and pH stable fluorescent coordination polymer for sensing nitro explosives or metal ions with high selectivity and sensitivity in aqueous solution

2021 ◽  
Vol 234 ◽  
pp. 117958
Author(s):  
Lei Zhang ◽  
Jinsong Hu ◽  
Jiaxin Li ◽  
Jing Zhang
Keyword(s):  
Aqueous Solution ◽  
Coordination Polymer ◽  
Metal Ions ◽  
High Selectivity ◽  
Nitro Explosives

Xanthurenic acid: a natural ionophore with high selectivity and sensitivity for potassium ions in an aqueous solution

2016 ◽  
Vol 40 (3) ◽  
pp. 1930-1934 ◽  
Author(s):  
M. Raju ◽  
Tapasya J. Patel ◽  
Ratish R. Nair ◽  
Pabitra B. Chatterjee
Keyword(s):  
Aqueous Solution ◽  
Detection Limit ◽  
Metal Ions ◽  
High Selectivity ◽  
Xanthurenic Acid ◽  
Potassium Ions ◽  
Turn On ◽  
Tryptophan Metabolite

Synopsis: A well-known tryptophan metabolite, xanthurenic acid, a natural non-fluorescent intermediate siderophore, showed a very selective turn-on response to K+ over other competing metal ions and the detection limit of this natural ionophore was found to be 53 nM at physiological pH.

Straw-sheaf-like terbium-based coordination polymer architectures: microwave-assisted synthesis and their application as selective luminescent probes for heavy metal ions

2015 ◽  
Vol 39 (4) ◽  
pp. 2973-2979 ◽  
Author(s):  
Mengmeng Shi ◽  
Chenghui Zeng ◽  
Lei Wang ◽  
Zhiwen Nie ◽  
Yongxia Zhao ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Coordination Polymer ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Microwave Assisted Synthesis ◽  
Luminescent Probes ◽  
Microwave Assisted ◽  
Highly Sensitive ◽  
Polymer Architectures

Terbium-based coordination polymer architectures were successfully synthesized via a microwave heating approach and they showed highly sensitive and selective luminescence quenching to Pb2+ in aqueous solution.

scholarly journals A novel self-assembled supramolecular sensor based on thiophene-functionalized imidazophenazine for dual-channel detection of Ag+ in an aqueous solution

RSC Advances ◽  
2017 ◽  
Vol 7 (84) ◽  
pp. 53439-53444 ◽  
Author(s):  
Hai-Xiong Shi ◽  
Wen-Ting Li ◽  
Qiao Li ◽  
Hai-Li Zhang ◽  
You-Ming Zhang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
High Selectivity ◽  
Channel Detection ◽  
Dual Channel ◽  
Self Assembled

A novel dual-channel chemosensor S1 is designed and synthesized, which recognizes Ag+ over other metal ions with high selectivity and sensitivity.

REMOVAL OF HEAVY METAL Cr (II), Ni (II), Cu (II), Zn (II), Cd (II), Pb (II) IONS FROM AQUEOUS SOLUTION BY MENTHA PIPERITA EXTRACT

2020 ◽  
pp. 15-20
Author(s):  
Ersin Yucel ◽  
Mine Yucel
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
High Efficiency ◽  
Correlation Coefficients ◽  
Langmuir Model ◽  
Mentha Piperita ◽  
Freundlich Model ◽  
Biosorption Capacity ◽  
Peppermint Extract ◽  
The Stability

In this study, the usage of the peppermint (Mentha piperita) for extracting the metal ions [Mg (II), Cr (II), Ni (II), Cu (II), Zn (II), Cd (II), Pb (II)] that exist at water was investigated. In order to analyze the stability properties, Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms were used at removing the metal ions and the highest correlation coefficients (R2) were obtained at Langmuir isotherm. Therefore, it is seen that the Langmuir model is more proper than the Freundlich model. However, it was found that the correlation coefficients of removing Ni and Cd is higher at Freundlich model than Langmuir and low at Dubinin-Radushkevich isotherm. It is established that the biosorption amount increase depends on the increase of biosorbent and it can be achieved high efficiency (95%) even with small amount (0.6 mg, peppermint extract) at lead ions. It is also determined that the peppermint extracted that is used at this study shows high biosorption capacity for metal ions and can be used for immobilization of metals from polluted areas.

Comparative Bio-sorption of Cadmium and Nickel Ions from Aqueous Solution onto Fibers of Date Palm using Fluidized Bed Column

2019 ◽  
Vol 70 (5) ◽  
pp. 1507-1512
Author(s):  
Baker M. Abod ◽  
Ramy Mohamed Jebir Al-Alawy ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Date Palm ◽  
Operating Conditions ◽  
Initial Concentration ◽  
Bed Height

The aim of this study is to use the dry fibers of date palm as low-cost biosorbent for the removal of Cd(II), and Ni(II) ions from aqueous solution by fluidized bed column. The effects of many operating conditions such as superficial velocity, static bed height, and initial concentration on the removal efficiency of metal ions were investigated. FTIR analyses clarified that hydroxyl, amine and carboxyl groups could be very effective for bio-sorption of these heavy metal ions. SEM images showed that dry fibers of date palm have a high porosity and that metal ions can be trapped and sorbed into pores. The results show that a bed height of 6 cm, velocity of 1.1Umf and initial concentration for each heavy metal ions of 50 mg/L are most feasible and give high removal efficiency. The fluidized bed reactor was modeled using ideal plug flow and this model was solved numerically by utilizing the MATLAB software for fitting the measured breakthrough results. The breakthrough curves for metal ions gave the order of bio-sorption capacity as follow: Cd(II)]Ni(II).

Stabilization of Hazardous Materials into Ferrites

1991 ◽  
Vol 23 (1-3) ◽  
pp. 399-404 ◽  
Author(s):  
Y. Tamaura ◽  
P. Q. Tu ◽  
S. Rojarayanont ◽  
H. Abe
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Present Method ◽  
Hazardous Materials ◽  
Precipitation Process ◽  
Waste Waters ◽  
Formation Reaction ◽  
Coating Method ◽  
Hazardous Metal

Stabilization of the hazardous materials by the Fe3O4-coating method was studied. In the ferrite-formation reaction in the aqueous solution, the adsorption of the metal ions and the oxidation of the adsorbed Fe(II) ions are repeated on the surface of the ferrite particles. This reaction was adopted to the coating of the hazardous materials with the Fe3O4(or ferrite). By repeating the two steps of l)the addition of the Fe(II) aqueous solution into the suspension of the hazardous materials, and 2)the oxidation by passing air through the reaction suspension, with the Fe3O4 layer, we could coat the surfaces of the hazardous materials, such as the heavy metal sludge from the neutralization-precipitation process, the CaF2 precipitates in the treatment of the waste waters containing fluoride ion along with hazardous metal ions, and the soils containing Cd(II) ion. These Fe3O4-coated hazardous materials are very stable and no heavy metal ions are leached under the normal environmental conditions. The ferrite sludges formed in the “Ferrite Process” were highly stabilized by the present method, and by the heat-treatment.

Sign in / Sign up

Export Citation Format

Share Document