scholarly journals A way to hypo-elastic artificial materials without a strain potential and displaying flutter instability

Author(s):  
G. Bordiga ◽  
A. Piccolroaz ◽  
D. Bigoni
2021 ◽  
Vol 7 (9) ◽  
pp. eabf1966
Author(s):  
Hang Zhang ◽  
Jun Wu ◽  
Daining Fang ◽  
Yihui Zhang

Multistable mechanical metamaterials are artificial materials whose microarchitectures offer more than two different stable configurations. Existing multistable mechanical metamaterials mainly rely on origami/kirigami-inspired designs, snap-through instability, and microstructured soft mechanisms, with mostly bistable fundamental unit cells. Scalable, tristable structural elements that can be built up to form mechanical metamaterials with an extremely large number of programmable stable configurations remains illusive. Here, we harness the elastic tensile/compressive asymmetry of kirigami microstructures to design a class of scalable X-shaped tristable structures. Using these structure as building block elements, hierarchical mechanical metamaterials with one-dimensional (1D) cylindrical geometries, 2D square lattices, and 3D cubic/octahedral lattices are designed and demonstrated, with capabilities of torsional multistability or independent controlled multidirectional multistability. The number of stable states increases exponentially with the cell number of mechanical metamaterials. The versatile multistability and structural diversity allow demonstrative applications in mechanical ternary logic operators and amplitude modulators with unusual functionalities.


2021 ◽  
Vol 915 ◽  
Author(s):  
Luis Phillipe Tosi ◽  
Benedikt Dorschner ◽  
Tim Colonius

Abstract


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
He Gao ◽  
Haoran Xue ◽  
Zhongming Gu ◽  
Tuo Liu ◽  
Jie Zhu ◽  
...  

AbstractTopological phases of matter are classified based on their Hermitian Hamiltonians, whose real-valued dispersions together with orthogonal eigenstates form nontrivial topology. In the recently discovered higher-order topological insulators (TIs), the bulk topology can even exhibit hierarchical features, leading to topological corner states, as demonstrated in many photonic and acoustic artificial materials. Naturally, the intrinsic loss in these artificial materials has been omitted in the topology definition, due to its non-Hermitian nature; in practice, the presence of loss is generally considered harmful to the topological corner states. Here, we report the experimental realization of a higher-order TI in an acoustic crystal, whose nontrivial topology is induced by deliberately introduced losses. With local acoustic measurements, we identify a topological bulk bandgap that is populated with gapped edge states and in-gap corner states, as the hallmark signatures of hierarchical higher-order topology. Our work establishes the non-Hermitian route to higher-order topology, and paves the way to exploring various exotic non-Hermiticity-induced topological phases.


2011 ◽  
Vol 99-100 ◽  
pp. 1059-1062
Author(s):  
Ji Duo Jin ◽  
Ning Li ◽  
Zhao Hong Qin

The nonlinear dynamics are studied for a supported cylinder subjected to axial flow. A nonlinear model is presented for dynamics of the cylinder supported at both ends. The nonlinear terms considered here are the quadratic viscous force and the structural nonlinear force induced by the lateral motions of the cylinder. Using two-mode discretized equation, numerical simulations are carried out for the dynamical behavior of the cylinder to explain the flutter instability found in the experiment. The results of numerical analysis show that at certain value of flow velocity the system loses stability by divergence, and the new equilibrium (the buckled configuration) becomes unstable at higher flow leading to post-divergence flutter. The effect of the friction drag coefficients on the behavior of the system is investigated.


Mathematics ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1090
Author(s):  
Xiaochen Wang ◽  
Zhichun Yang ◽  
Guiwei Zhang ◽  
Xinwei Xu

A combined energy method is proposed to investigate the flutter instability characteristics of weakly damped panels in the supersonic airflow. Based on the small damping assumption, the motion governing partial differential equation (PDE) of the panel aeroelastic system, is built by adopting the first-order piston theory and von Karman large deflection plate theory. Then by applying the Galerkin procedure, the PDE is discretized into a set of coupled ordinary differential equations, and the system reduced order model (ROM) with two degrees of freedom is obtained. Considering that the panel aeroelastic system is non-conservative in the physical nature, and assuming that the panel exhibits a single period oscillation on the flutter occurrence, the non-conservative energy balance principle is applied to the linearized ROM within one single oscillation period. The obtained result shows that the ROM modal coordinate amplitudes ratio is regulated by the modal damping coefficients ratio, though each modal damping coefficient is small. Furthermore, as the total damping dissipation energy can be eliminated due to its smallness, the He’s energy balance method is applied to the undamped ROM, therefore the critical non-dimensional dynamic pressure on the flutter instability occurrence, and the oscillation circular frequency amplitude relationship (linear and nonlinear form) are derived. In addition, the damping destabilization paradoxical influence on the system flutter instability is investigated. The accuracy and efficiency of the proposed method are validated by comparing the results with that obtained by using Routh Hurwitz criteria.


2021 ◽  
Vol 1034 ◽  
pp. 169-175
Author(s):  
Giuseppe Ciaburro

The use of recycled materials to replace natural and artificial materials represents an interesting and real possibility for all industrial sectors to contribute to the reduction of the amount of waste disposed of and non-renewable resources consumed. This study reports the results of the measurements of the sound absorption coefficient carried out on specimens obtained from the recycling of different materials. A sustainable development of our planet requires us to adopt materials recycling policies to ensure the economical use of resources. Two types of materials have been studied: material obtained from the recycling of plastic bottles, and a material obtained from the recycling of asphalt milled. Both materials showed interesting sound absorption performances covering different frequency ranges.


2017 ◽  
pp. 5-1-5-31
Author(s):  
Christophe Craeye ◽  
Xavier Radu ◽  
Filippo Capolino ◽  
Alex G. Schuchinsky

2020 ◽  
Author(s):  
Elena Pecchioni ◽  
Alba Patrizia Santo

The city of Firenze represents, for the variety of its artistic and architectural heritage, a kind of open-air museum. Works of art and monuments are mainly made of the rocks outcropping in Firenze and in the surrounding areas; indeed, a close link exists between monuments, geographical position of the city and its history. Florence, is characterised by the color of its stone-built cultural heritage, mainly by the warm ochraceous color of the Medieval Pietraforte sandstone and the cerulean grey of the Renaissance Pietra Serena sandstone together with other natural and artificial materials used to complete or cover the stone walls. The web-app Florence RockinArt was created to deepen the knowledge of the stone materials. It is addressed to all those who are interested in discovering the monuments of Florence by carefully observing the stone materials that make up them. The web-app contains short historical notes on the main monuments and detailed geological, mineralogical and petrographic characteristics of the natural and artificial materials of which they are constituted.


Sign in / Sign up

Export Citation Format

Share Document