Quantitative X-ray microtomography technique to evaluate high-temperature transient diffusion of Iron diffusants in high alumina-silicate porous refractory media

Aim and Objective: Effect of two different modification methods for introducing Ni into ZSM-5 framework was investigated under high temperature synthesis conditions. The nickel successfully introduced into the MFI structures at different crystallization conditions to enhance the physicochemical properties and catalytic performance. Materials and Methods: A series of impregnated Ni/ZSM-5 and isomorphous substituted NiZSM-5 nanostructure catalysts were prepared hydrothermally at different high temperatures and within short times. X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray (EDX), Brunner, Emmett and Teller-Barrett, Joyner and Halenda (BET-BJH), Fourier transform infrared (FTIR) and Temperature-programmed desorption of ammonia (TPDNH3) were applied to investigate the physicochemical properties. Results: Although all the catalysts showed pure silica MFI–type nanosheets and coffin-like morphology, using the isomorphous substitution for Ni incorporation into the ZSM-5 framework led to the formation of materials with lower crystallinity, higher pore volume and stronger acidity compared to using impregnation method. Moreover, it was found that raising the hydrothermal temperature increased the crystallinity and enhanced more uniform incorporation of Ni atoms in the crystalline structure of catalysts. TPD-NH3 analysis demonstrated that high crystallization temperature and short crystallization time of NiZSM-5(350-0.5) resulted in fewer weak acid sites and medium acid strength. The MTO catalytic performance was tested in a fixed bed reactor at 460ºC and GHSV=10500 cm3 /gcat.h. A slightly different reaction pathway was proposed for the production of light olefins over impregnated Ni/ZSM-5 catalysts based on the role of NiO species. The enhanced methanol conversion for isomorphous substituted NiZSM-5 catalysts could be related to the most accessible active sites located inside the pores. Conclusion: The impregnated Ni/ZSM-5 catalyst prepared at low hydrothermal temperature showed the best catalytic performance, while the isomorphous substituted NiZSM-5 prepared at high temperature was found to be the active molecular sieve regarding the stability performance.

Download Full-text

High-pressure synthesis and crystal structure of the mixed-cation borate Ga4In4B15O33(OH)3

Zeitschrift für Naturforschung B ◽

10.1515/znb-2019-0014 ◽

2019 ◽

Vol 74 (4) ◽

pp. 357-363

Author(s):

Daniela Vitzthum ◽

Hubert Huppertz

Keyword(s):

Crystal Structure ◽

High Pressure ◽

High Temperature ◽

Diffraction Data ◽

X Ray Diffraction ◽

Synthesis And Crystal Structure ◽

X Ray ◽

Mixed Cation ◽

High Pressure High Temperature ◽

Pressure Synthesis

AbstractThe mixed cation triel borate Ga4In4B15O33(OH)3 was synthesized in a Walker-type multianvil apparatus at high-pressure/high-temperature conditions of 12.5 GPa and 1300°C. Although the product could not be reproduced in further experiments, its crystal structure could be reliably determined via single-crystal X-ray diffraction data. Ga4In4B15O33(OH)3 crystallizes in the tetragonal space group I41/a (origin choice 2) with the lattice parameters a = 11.382(2), c = 15.244(2) Å, and V = 1974.9(4) Å3. The structure of the quaternary triel borate consists of a complex network of BO4 tetrahedra, edge-sharing InO6 octahedra in dinuclear units, and very dense edge-sharing GaO6 octahedra in tetranuclear units.

Download Full-text

On Two Mechanisms of X-Ray Generation in Comets

International Astronomical Union Colloquium ◽

10.1017/s025292110008492x ◽

1985 ◽

Vol 85 ◽

pp. 365-368

Author(s):

S. Ibadov

Keyword(s):

High Temperature ◽

Interplanetary Dust ◽

Dust Particles ◽

Interplanetary Dust Particles ◽

Temperature Plasma ◽

X Ray ◽

Plasma Generation ◽

High Temperature Plasma

AbstractThe intensity of solar X-radiation scattered by a comet is calculated and compared to the proper X-radiation of the comet due to impacts of cometary and interplanetary dust particles. Detection of X-radiation of dusty comets at small heliocentric distances (R ≤ 1 a.u.) is found to be an indicator of high-temperature plasma generation as result of grain collisions.

Download Full-text

The Application of X-Ray Diffraction at Elevated Temperatures to Study the Mechanism of Formation of Sodium Tripolyphosphate

Advances in X-ray Analysis ◽

10.1154/s0376030800001634 ◽

1961 ◽

Vol 5 ◽

pp. 276-284

Author(s):

E. L. Moore ◽

J. S. Metcalf

Keyword(s):

High Temperature ◽

Low Temperature ◽

Amorphous Phase ◽

Elevated Temperatures ◽

Sodium Tripolyphosphate ◽

X Ray Diffraction ◽

Mechanism Of Formation ◽

X Ray ◽

Temperature Form ◽

High Temperature Form

AbstractHigh-temperature X-ray diffraction techniques were employed to study the condensation reactions which occur when sodium orthophosphates are heated to 380°C. Crystalline Na4P2O7 and an amorphous phase were formed first from an equimolar mixture of Na2HPO4·NaH2PO4 and Na2HPO4 at temperatures above 150°C. Further heating resulted in the formation of Na5P3O10-I (high-temperature form) at the expense of the crystalline Na4P4O7 and amorphous phase. Crystalline Na5P3O10-II (low-temperature form) appears after Na5P3O10-I.Conditions which affect the yield of crystalline Na4P2O7 and amorphous phase as intermediates and their effect on the yield of Na5P3O10 are also presented.

Download Full-text

Mechanical Alloying Behavior in the Nb-Si, Ta-Si, and Nb-Ta-Si Systems

MRS Proceedings ◽

10.1557/proc-133-415 ◽

1988 ◽

Vol 133 ◽

Cited By ~ 3

Author(s):

K. S. Kumar ◽

S. K. Mannan

Keyword(s):

High Temperature ◽

Mechanical Alloying ◽

Mechanical Milling ◽

Room Temperature ◽

Crystalline Compound ◽

X Ray Diffraction ◽

X Ray ◽

Β Phase ◽

Α Phase

ABSTRACTThe mechanical alloying behavior of elemental powders in the Nb-Si, Ta-Si, and Nb-Ta-Si systems was examined via X-ray diffraction. The line compounds NbSi2 and TaSi2 form as crystalline compounds rather than amorphous products, but Nb5Si3 and Ta5Si3, although chemically analogous, respond very differently to mechanical milling. The Ta5Si3 composition goes directly from elemental powders to an amorphous product, whereas Nb5Si3 forms as a crystalline compound. The Nb5Si3 compound consists of both the tetragonal room-temperature α phase (c/a = 1.8) and the tetragonal high-temperature β phase (c/a = 0.5). Substituting increasing amounts of Ta for Nb in Nb5Si3 initially stabilizes the α-Nb5Si3 structure preferentially, and subsequently inhibits the formation of a crystalline compound.

Download Full-text