Purpose
This study aims to fabricate and investigate the tribological performance of ultra-high molecular weight polyethylene (UHMWPE)-based composite materials reinforced with 0.5, 1 and 2 weight percentage of graphene nanoplatelets (GNPs) while keeping the weight percentage of vitamin C constant at 2% for each composite.
Design/methodology/approach
In this paper, the composites were fabricated using hot pressing, and the dispersion of GNP/vitamin C/UHMWPE hybrid composite was investigated by X-ray diffraction. Experimental trials were performed according to ASTM F732 on a reciprocating sliding tribometer (pin-on-disc) at human body temperature of 37 ± 1 °C, for a load of 52 N, to assess the role of these fillers on the tribological properties of UHMWPE against Ti6Al4V counter body material under dry and lubricating (human serum) environment.
Findings
In this study, it has been observed that friction and wear behavior of the developed composites improve with increase in weight percentage of GNP, and human serum adheres to the surface of the composite pins upon sliding, resulting in the formation of a film, which results in better wear resistance of the composite pins under human serum lubrication than dry sliding. Scanning electron microscope was used to investigate the worn surface morphological examination of the composite materials. Specific wear rate of 0.76 × 10−7 mm3/Nm was attained for 2 Wt.% GNP-filled composite under human serum lubrication.
Practical implications
The results indicate the compatibility of the composite material used in this study and suggested the in vitro implant application.
Originality/value
The presented work includes novel study of synergistic effect of GNP (which acts as a solid lubricant) and vitamin C (added as an antioxidant) on the tribological performance of UHMWPE under dry and human serum lubrication.
Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials
